Product Specifications
Prod Model: |
2DPC1818 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Mining Object: |
Metallic and Non-Metallic Ore Excavator |
Type: |
Hammer Crusher |
Motor Type: |
DC Motor |
Condition: |
New |
Product Description
DSMAC Hammer Crusher for Limestone and Coal
2DPC 1818 Single Stage Hammer Crusher:
Rotor Size(mm*mm): Φ 1850*1890
Capacity(t/h): 800 -1000
Hammers Quantity: 40*2
Feeding size (mm*mm): 2030*2080
Max Feeding Granularity (mm): 1100*1100*1500
Discharging Granularity (mm): 90%≤ 75
Motor Power (kw): 630*2
Applications:
1. Used for usual fragile ore such as limestone, argillaceous siltstone, shale, gypsum, coal, etc.
2. used exclusively for cement production. It can also be used for crushing mixtures of limestone (marl) and clayey sandstone.
3. Used for crushing raw materials that have compressive strength less than 150MPa, while the moisture content shall be lower than 15%.
4. Hammer Crusher is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc.
Features:
1. Large feeding size, High crushing ratio, high cost performance.
2. The rotor adopts the WHM two-step super hard surface deposited technique, and the service life of welding rods are over two times than that ordinary anti-abrasion welding rods.
3. New design of grid plate, the material flow smoothly and stably, the size is fine and even, and the service life of the grid plate is long.
4. The service life of the hammer is 50-150% longer than the hammer which is made of Mn18Cr2MoNbRe.
5. With special dual iron removing protection device, it can removing the iron ant others automatically.
Project Cases
1500-2000TPH limestone Crushing Line
Capacity: 1500-2000TPH
Raw materials: Limestone
Max feeding size: 800-100mm
Output size: 0-4mm, 4-7mm, 7-10mm, 10-20mm, 20-26mm
NO. | Equipment | Model | Capacity(t/h) | Set |
1 | Vibrating Feeder | ZSW1000 | 800-1000 | 2 |
2 | Hammer Crusher | DPC1820 | 700-1000 | 2 |
3 | Vibrating Screen | YK2460 | 150~875 | 1 |
3YK2460 | 150~875 | 6 |
DSMAC Hammer Crusher for Limestone and Coal Type:
Type | Rotor size (mm*mm) | Capacity (t/h) | Hammer quantity | Input port size (mm*mm) | Input size (mm) | Output size (mm) | Power (kw) | Weight (t) |
DPC1412 | ¢ 1420 *1194 | 80-150 | 26 | 1300 *1320 | 500*500 *800 | 90%≤ 25 | 200 | 25 |
DPC1616 | ¢ 1650 *1630 | 130-220 | 28 | 1500 *1785 | 800*800 *900 | 90%≤ 25 | 355 | 43 |
DPC1818 | ¢ 1850 *1730 | 240-350 | 36 | 1755 *1780 | 800*800 *1000 | 90%≤ 25 | 560 | 56 |
DPC2018 | ¢ 2018 *1802 | 350-450 | 40 | 2040 *1860 | 1000*1000*1000 | 90%≤ 25 | 630 | 81 |
DPC2022 | ¢ 2018 *2227 | 400-600 | 50 | 2095 *2380 | 1000*1000*1200 | 90%≤ 25 | 800 | 110 |
DLPC 2022-1 | ¢ 2018 *2227 | 600-800 | 50 | 2095 *2380 | 1000*1000*1500 | 90%≤ 25 | 800 | 120 |
DLPC 2022-2 | ¢ 2018 *2227 | 700-900 | 50 | 2095 *2380 | 1000*1000*1500 | 90%≤ 25 | 800 | 130 |
2DPC 1818 | ¢ 1800 *1806 | 900 -1000 | 40*2 | 2030 *2080 | 1100*1100*1500 | 90%≤ 75 | 600*2 | 148 |
2DPC2022 | ¢ 2018 *2237 | 1200 -1500 | 2*50 | 2670 *2460 | 1000*1000*1500 | 90%≤ 75 | 2*800 | 145 |
2DPC 2325 | ¢ 2300 *2508 | 1600 -2000 | 66*2 | 3065 *2666 | 1100*1100*1500 | 90%≤ 75 | 1125*2 | 204 |