Categories
Price: | Negotiable/Piece |
---|---|
Min Order: | 1 /Piece |
Prod Model: | GLC-HCP143 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Use: | Appliance Paint |
Appearance: | Liquid |
Substrate: | Steel |
Method: | Spray, Brush or Roller |
Level: | Intermediate Paint |
GREEN LEAFE CHEMICAL LIMITED | ||||||
GREEN LEAF Handbook of industrial protective coatings |
High chlorinated polyethylene anticorrosive intermediate paint HCP143 |
|||||
Application | Apply to various steel surface coating which subjected to atmosphere for chemical, industrial air and acid, alkali and salt corrosion , may also apply anti-corrosion coating of concrete facilities in the middle of the surface coating,it has excellent moisture resistance, water resistance, chemical medicinal resistance and chemical atmospheric resistance, good derust performance , combined with the bottom , strong adhesion, fast drying, once filming of 45 degrees to 50 microns, can reduce the frequency of construction ,to convenient for construction. | |||||
Products Introduction | Tan, made from the high chlorinated polyethylene, epoxy resin, plasticizer, anti-rust paint flakes, stabilizer, anti-settling agent, solvent and other components. | |||||
Product data | Solid volume | 26.3~28.4% | ||||
Dry film thickness | 45 to 50 micron is equivalent to 170 to 190 microns wet film thickness. | |||||
Theoretical spreading rate | 4.2~3.85m2/kg | |||||
Practical Coverage | Allow appropriate loss | |||||
Works described in detail | Mixing ratio | Single canned | ||||
Construction method | ||||||
Airless spray | Recommended use: Nozzle 0.43 ~ 0.53mm, total output fluid pressure> 17.6MPa (176 kg/cm2) | |||||
Brush or roller | Recommended | |||||
Conventional spray | Recommended | |||||
Thinner | BW101 | |||||
Paint equipment cleaning agent | BW101 | |||||
Use of | No limit | |||||
Shelf life | One year | |||||
Drying time | ||||||
Substrate temperature | Surface dry(h) | Completely dry(h) | Repeat painting interval | |||
The shortest | The longest | |||||
0degree centigrade 20 degree centigrade 25 degree centigrade 30 degree centigrade |
1 | 24 |
24h 8h 6h |
No limit | ||
Storage and management | Storage | Store in a cool dry place | ||||
Packing | 25kgin 20 liter container | |||||
Flash point | 38degree centigrade | |||||
Proportion | About 1.4 kg / liter | |||||
Technical requirements and surface treatment | Before construction, the original surface of the substrate should be kept clean and dry. | |||||
Restriction |
Front matching paint: High Chlorinated Polyethylene micaceous iron antirust paint and oxide red antirust paint After matching paint: assorted high-chlorinated polyethylene anticorrosive top coat. |
|||||
Safety measures | See“Summary of Paint" |