Categories
| Price: | Negotiable/Piece |
|---|---|
| Min Order: | 1 /Piece |
| Pay Type: | L/C,T/T |
| ONE: |
| 30Q small deep grove ball bearing grinding line |
| Standard model : |
| 3MZ135 Auto inner ring race grinder of ballbearing |
| 3MZ203 Auto inner ring inner bore grinder of ballbearing |
| 3MZ313 Auto inner ring race super finishing of bearing |
| 3MZ146 Auto outer ring race grinder of ballbearing |
| 3MZ326 Auto outer ring race super finishingof bearing |
| Supplementary Equipments |
| Product brief introduction: |
| M1001 NC Rotor Groove Grinder is adopted with Japan imported NC system, hi-power servo motor to control work radial feeding, wheel dressing auto radial compensation, diamond roller dressing, high-stiffness rolling bearing spindle system, air sealing to ensure spindle high-precision and long life To adapt CBN hi-speed grinding wheel and process. Machine main driving and feeding parameter is stepless optimization, attached with groove self-division positioning mechanism or other positioning mechanism. Huge coolant tank is to guarantee grinding efficiency and accuracy. |
Item | Parameters | |
processing accuracy | squareness | 0.005 mm |
parallelism | 0.006mm | |
roughness | Ra <0.2μm | |
Main parameter | rotor OD | (30 ~ 120) mm |
rotor groove width | 1.4 ~ 5mm | |
rotor groove axial thickness | 8 ~ 40mm | |
work groove radial max grinding depth | 20mm | |
wheel diameter | 400mm | |
grinding surface speed | 60 m/s | |
single groove grinding time | 0.3-1.5min (single stock removal <0.2mm) | |
| TWO: |
| 50Q small deep groove ball bearing grinding line |
| Standard model: |
| 3MK 135 Auto inner ring race grinder of ballbearing |
| 3MK 205 Auto inner ring inner bore grinder of ballbearing |
| 3MK 315 Auto inner ring race super finishing of bearing |
| 3MK 1410 Auto outer ring race grinder of ballbearing |
| 3MK 3210 Auto outer ring race super finishingof bearing |
| Supplementary Equipments |
| Composition: |
| 50Q Automatic Production Line is ideally suited for producing small ball bearing rings (inner rings 30-50mm inner diameter, outer rings 40-100mm outer diameter). It mainly consists of 3MK135(for inner rings) and 3MK1410(for outer rings) Automatic Groove Grinding Machine, 3MK315(for inner rings) and 3MK3210(for outer rings) Race Super Finishing Machine, 3MK205 Internal (Bore) Grinding Machine and other supplementary equipments such as outside bearing tester and charging machine. |
| Features: |
| 1. It is first time for the RRMS(rapid recomposed manufacture system) technology applied domestically: |
| l More than 30% time saving in new product development. |
| More than 10% reduction in repeated investment. |
| More than 10% increasement in machine utilization rate. |
| 2. Central bus-control function------demanded by information- and modernization-based enterprises: |
| Tele-monitoring function. Whenever you are working in other places, going on errands or traveling, you may view the graphic display, history curve and alarm information of the factory spot through internet in real time. Meanwhile, according to the authority, you may answer the alarm or modify the variables and so on. |
| Tele-diagnosis function. It is possible for you to view the real-time information of working spot, diagnose the faults and then inform the factory technicians for finding possible solutions as soon as possible. |
| The recording, storage and printing of the faults. |
| The statistics, storage, report and printing of the various data (monthly production & shift production & eligibility rate) during production. |
| Directly connected with the factory management net, realizing the automatization and informatization of the whole factory. |
| 3. Centralized cooling system and centralized air-feed system. Three filtrating and cooling schemes, all adopting standard interface, are provided for users as options: |
| Filtrating and cooling system laid overhead. |
| Filtrating and cooling system laid underground. |
| Separate filtrating and cooling system for each machine. |
| 4. The most advanced eliminating idle-stroke/anti- collision system and online grinding wheel balancing system are adopted, providing increased automatic efficiency, security performance and machine life. |
| 5. Patented apparent design. Unified and harmonious streamline layout, exquisite and vivid color matching, fashionable big-arc panel and the meaningful RIFA’s mark, all of these bring unique style to the line of machines. |
| 6. Automatic charging and discharging mechanism: |
| Traditional feeding mechanism is replaced by automatic pusher, avoiding collision and guaranteeing the quality of the bearings. |
| Automatic alarm when charge empty or discharge full. Charging/ discharging time is adjustable. |
| 7. Machine bed is constructed from HT250 cast iron and resin sand casting technology is used, providing better material equality and shock absorption, guaranteeing the non-deformation of the machine and precision machining of the bearing rings. |
| THREE: |
| 100Q small deep groove ball bearing grinding line |
| Standard model: |
| 3MZ 1310 Auto inner ring race grinder of ballbearing |
| 3MZ 2010 Auto inner ring inner bore grinder of ballbearing |
| 3MZ 3110 Auto inner ring race super finishing of bearing |
| 3MZ 1420 Auto outer ring race grinder of ballbearing |
| 3MZ 3220 Auto outer ring race super finishingof bearing |
| Supplementary Equipments |
| Composition: |
| 100Q Automatic Production Line is ideally suited for producing small ball bearing rings (inner rings 40-100mm inner diameter, outer rings 100-200mm outer diameter). It mainly consists of 3MZ1310(for inner rings) and 3MZ1420(for outer rings) Automatic Groove Grinding Machine, 3MZ3110(for inner rings) and 3MZ3220(for outer rings) Race Super Finishing Machine, 3MZ2010 Internal (Bore) Grinding Machine and other supplementary equipments such as outside bearing tester and charging machine. |
| Features: |
| 1. It is first time for the RRMS(rapid recomposed manufacture system) technology applied domestically: |
| l More than 30% time saving in new product development. |
| More than 10% reduction in repeated investment. |
| More than 10% increasement in machine utilization rate. |
| 2. Central bus-control function------demanded by information- and modernization-based enterprises: |
| Tele-monitoring function. Whenever you are working in other places, going on errands or traveling, you may view the graphic display, history curve and alarm information of the factory spot through internet in real time. Meanwhile, according to the authority, you may answer the alarm or modify the variables and so on. |
| Tele-diagnosis function. It is possible for you to view the real-time information of working spot, diagnose the faults and then inform the factory technicians for finding possible solutions as soon as possible. |
| The recording, storage and printing of the faults. |
| The statistics, storage, report and printing of the various data (monthly production & shift production & eligibility rate) during production. |
| Directly connected with the factory management net, realizing the automatization and informatization of the whole factory. |
| 3. Centralized cooling system and centralized air-feed system. Three filtrating and cooling schemes, all adopting standard interface, are provided for users as options: |
| Filtrating and cooling system laid overhead. |
| Filtrating and cooling system laid underground. |
| Separate filtrating and cooling system for each machine. |
| 4. The most advanced eliminating idle-stroke/anti- collision system and online grinding wheel balancing system are adopted, providing increased automatic efficiency, security performance and machine life. |
| 5. Patented apparent design. Unified and harmonious streamline layout, exquisite and vivid color matching, fashionable big-arc panel and the meaningful RIFA’s mark, all of these bring unique style to the line of machines. |
| 6. Automatic charging and discharging mechanism: |
| Traditional feeding mechanism is replaced by automatic pusher, avoiding collision and guaranteeing the quality of the bearings. |
| Automatic alarm when charge empty or discharge full. Charging/ discharging time is adjustable. |
| 7. Machine bed is constructed from HT250 cast iron and resin sand casting technology is used, providing better material equality and shock absorption, guaranteeing the non-deformation of the machine and precision machining of the bearing rings. |
| FOUR: |
| 160Q small deep groove ball bearing grinding line |
| Standard model: |
| 3MZ 1316 Auto inner ring race grinder of ballbearing |
| 3MZ 2016 Auto inner ring inner bore grinder of ballbearing |
| 3MZ 3116 Auto inner ring race super finishing of bearing |
| 3MZ 1425 Auto outer ring race grinder of ballbearing |
| 3MZ 3225 Auto outer ring race super finishingof bearing |
| Supplementary Equipments |
| Composition: |
| 160Q Automatic Production Line is ideally suited for producing small ball bearing rings (inner rings 80-160mm inner diameter, outer rings 120-250mm outer diameter). It mainly consists of 3MZ1316(for inner rings) and 3MZ1425(for outer rings) Automatic Groove Grinding Machine, 3MZ3116(for inner rings) and 3MZ3225(for outer rings) Race Super Finishing Machine, 3MZ2016 Internal (Bore) Grinding Machine and other supplementary equipments such as outside bearing tester and charging machine. |
| Features: |
| 1. It is first time for the RRMS(rapid recomposed manufacture system) technology applied domestically: |
| l More than 30% time saving in new product development. |
| More than 10% reduction in repeated investment. |
| More than 10% increasement in machine utilization rate. |
| 2. Central bus-control function------demanded by information- and modernization-based enterprises: |
| Tele-monitoring function. Whenever you are working in other places, going on errands or traveling, you may view the graphic display, history curve and alarm information of the factory spot through internet in real time. Meanwhile, according to the authority, you may answer the alarm or modify the variables and so on. |
| Tele-diagnosis function. It is possible for you to view the real-time information of working spot, diagnose the faults and then inform the factory technicians for finding possible solutions as soon as possible. |
| The recording, storage and printing of the faults. |
| The statistics, storage, report and printing of the various data (monthly production & shift production & eligibility rate) during production. |
| Directly connected with the factory management net, realizing the automatization and informatization of the whole factory. |
| 3. Centralized cooling system and centralized air-feed system. Three filtrating and cooling schemes, all adopting standard interface, are provided for users as options: |
| Filtrating and cooling system laid overhead. |
| Filtrating and cooling system laid underground. |
| Separate filtrating and cooling system for each machine. |
| 4. The most advanced eliminating idle-stroke/anti- collision system and online grinding wheel balancing system are adopted, providing increased automatic efficiency, security performance and machine life. |
| 5. Patented apparent design. Unified and harmonious streamline layout, exquisite and vivid color matching, fashionable big-arc panel and the meaningful RIFA’s mark, all of these bring unique style to the line of machines. |
| 6. Automatic charging and discharging mechanism: |
| Traditional feeding mechanism is replaced by automatic pusher, avoiding collision and guaranteeing the quality of the bearings. |
| Automatic alarm when charge empty or discharge full. Charging/ discharging time is adjustable. |
| 7. Machine bed is constructed from HT250 cast iron and resin sand casting technology is used, providing better material equality and shock absorption, guaranteeing the non-deformation of the machine and precision machining of the bearing rings. |
| Prod Model: | 30Q |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
