Type CD1 (MD1), wire-rope electric hoist is a kind of small-lifting equipment, it can be mounted on single beam overhead crane, gantry cranes, jib type CD1 (MD1). Electric hoist as only one normal speed which can satisfy normal application. It is widely used in factories, mines, harbours, warehouses, cargo storage area and shops, essentially in raising working efficiency and improving working conditions.
1. CD1 and MD1 series of steel-rope electric hoist are improved ones on the basis of the original CD and MD.
2. Tight structure, smart body, safety and reliability, commom
Used parts, strong lifting capacity, easy maintance.
3. The hoists exists in form of stationary style and crab-style.
4. The products are widely at industrial ore enterprises, railway, harbors, warehouses and materials sites etc.
5. Working environment: No fire, no explosive danger, no corrosive media and no dirt exist.
6. Working temperature: -25° C~+40° C, Wetness is less than 85%.
7. 220V/380V/50Hz-60Hz 440V 3Phases
8. Mainly consists 3 parts: Lifting mechanism, traveling mechanism and electrical equipment
9. With slight modification, it also can be use as a which.
10. Electric wire rope Hoist is assembled by several parts:
Motor
Hoist Motor is a taper type rotor motor with braking; It is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box
Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope
Hoisting rope comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum
Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system
Model CD1 or MD1 is composed of the contactor box, controlling switch, cut-off limiter. The working voltage of controlling switch is 380V, 36V or 24V (safety voltage).
Rope Guide
Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook
The hook block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing. The pulley is thicken and dilated than domestic common
High quality material:
1. Electrical equipment: Schneider Control box material: Q235B
2. Motor: Nanjing special electric
3. Bearing: Ha'erbin Bearing
4. Gear: 20Chromium manganese titanium
5. Hook: 40 chrimium forge
6. Wire rope: Guizhou Julong limited liability company
7. Transmission shaft: 45#quenched and tempered steel
8. Cover and coiling block: Thicken steel plate
Hoists Enquiry information need:
1. Capacity
2. Lifting height
3. Lifting speed and running speed requirement.
4. Power supply
5. Any other special requirement you need, like I beam type
Note
1. We only manufacture the high quality hoist
2. Different power supply available
3. OEM
4. Color variety
|
1.8m/min lifting speed |
|
2.20. -30. m/min travel speed |
|
3.0.5-10t capacity |
Qingyuan Tianhang Machine Co., Ltd. is located in qingyuan, baoding, China, covering an area of 5800 square meters. It is in the center of Beijing, tianjin and shijiazhuang, close to Beijing - shenzhen highway, next to state road 107. The traffic is very convenient.
Our company specializes in manufacturing lifting machine equipments. We have modern production lines and perfect testing means. The registered trademarks "shuanghang", "hangge" are approved by national industry and business asministration the bureau. The productions are inspected by China quanlity direct examination. And the products quality is insured by people insurerence corpporation of China.
Our main productions are (0.3-250t) pulley, (0.5-20t) chain block, (0.5-5t) lever block, (0.5-10t) electric block, all kinds of jacks such as hydraulic bottle jack, long RAM jack, ratchet buckle, hand puller, lifting riggings, chain, and hook series, etc. And according to the requirements of customers, we can design and make various special and non-standard lifting tools. Our products are unique, innovative and safe.
Because of the high quality, our products have been sold to more than 20 provinces and regions in China, and been exported to more than 30 countries and regions, such as Asia, Europe, America, Africa, the Middle East, wining wide praise from customers both at home and abroad. Our company has a number of sales places and does all the after-sales service there. With the first-class management and first-class technical team, our company passes the certification of ISO9001.
Our company sincerely hopes to create a better future with the new and old customers at home and abroad. With the principle of "quality is the first, credibility is the second", we welcome new and old customers to visit our company for business cooperation.
