Wheel Loader ZL50
1.The use of full-hydraulic steering, power-shift and hydraulic control to a working device ensures the light and flexible operation and stable and reliable movement.
2.Low-voltage wide-base engineering tyres, in the method of manual swing, have excellent cross-country ability and trafficability.
3.The working device adopts the pilot control, and the steering system by the method of load sensing coaxial flow amplification is light and flexible to operate.
ITEMS | DESCRIPTION |
Model: W156 | 5 ton wheel loader with Air-conditoner |
Main Standard Configuration | |
Bucket Capacity | 3.0m³ |
Rated Load | 5000kg |
Travelling Speed | |
Forward 1st | 0-11.5km/h |
Forward 2nd | 0-37.5km/h |
Reverse 1st: | 0-17km/h |
Max. Traction | 160kN |
Max. Break Out Force | 175kN |
Min. Turning Radius (outside tires) | 7600mm |
Max. Dumping Height | 3121mm |
Max. Reach | 1057mm |
Total Hydraulic Cycle Time | ≤11.1s |
Full Bucket Lifting Time | 5.7s |
Dimensions (LxWxH) | 7967x2977x3500mm |
Min. Clearance Over Ground | 450mm |
Operating Weight | 16200kg |
Diesel Engine | |
Model | WEICHAI STEYR WD10G220E21 | Shanghai SC11CB220G2B1 | CUMMINS 6CTA8.3 |
Type | Direct injection, turbocharged, water cooling, 4 strokes, 6 cylinders |
Rated Output | 162kW | 162kW | 160kW |
Rated Speed | 2200rpm |
Max. Torque | 860N.m | 860N.m | 908N.m |
Transmission | |
Model | ZL50 |
Rated Input Power | 154kW |
Rated Input Speed | 2200rpm |
Hydraulic Torque Converter Model | Single stage, two phase four components |
Torque Ratio When Zero Speed | 4 |
Transmission Type | two forward and one reverse gears/power shift, planet type |
Mechanical Gear Ratios | |
Gear I | 2.4346 |
Gear II | 0.6532 |
Reverse | 1.7814 |
I.O. Gear Ratio Of P.T.O. | |
P.T.O. 1 | 1.00 |
P.T.O. 2 | 1.167 |
Hydraulic Oil Pressure: | 1.10-1.40MPa |
Inlet Oil Pressure Of Torque Convertor | 0.30-0.45MPa |
Outlet Oil Pressure Of Torque Convertor | 0.20-0.30MPa |
Lubricating Oil Pressure | 0.10-0.20MPa |
Max. Permissible Temp & Outlet Of Torque Convertor | 120ºC |
Transaxle & Tire | |
Transaxle Type | self-made by Meritor technology |
Drive System | 4 wheel drive |
Drive Ratio | 22.85 |
Rear Axle Oscillation | Center oscillation |
Oscillating Angle Of Rear Axle | 13° |
Carrier Assembly ReductionRatio | 4.625 |
Wheel End Reduction Assembly Reduction Ratio | 4.94 |
Tire | 23.5-25 |
Pressure Of Tire | 0.28-0.32MPa |
Working Hydraulic System | |
Working Pump Type | Gear Pump |
System Working Pressure | 17 MPa |
Working Pump Max. Flow Rate | 328 l/min |
Lifting Cylinder Bore x Stroke | 165x757mm |
Tilting Cylinder Bore x Stroke | 200x540mm |
Steering System | |
Type | Articulation, full hydraulic power steering system with flow-amplified system |
Steering Pump Type | gear pump (Model: CBGj2080) |
Max. Flow Rate | 43L (1920r/min) |
Max. Working Pressure | 12MPa |
Steering Cylinder Bore x Stroke | 100x342mm |
Max. Steering Angle | 35° |
Brake System | |
Type | Air over hydraulic disc on four wheels brakes |
Drive Brake System Pressure | 0.71-0.784MPa |
Parking Brake | inner expanding shoe brake, air cylinder and spring energy reverse, applied via a switch on the control stand panel |
Oil Injection Capacity | |
Fuel Tank | 300L |
Engine Oil | 30L |
Transmission | 45L |
Hydraulic Oil Tank | 200L |
Transaxle | 30L |
Web: www.topallmachinery.es
http://topmac.en.made-in-china.com
Mobile: 13913404508
Topall company was establish in Yixing City, starting date in October 2005, is a focus on small and medium sized construction machinery R & D, production and international trade, private partnership enterprises, the main market is Africa, South Asia, the Middle East and South America and other underdeveloped countries and regions.
Topall product so far, the State Patent Office issued a total of three patents and four utility model patents.
"Innovation is the soul, the quality is the root, " This is Topall always adhere to the philosophy, Topall name from the beginning of the manufacturer without a pass, to small and medium now known in the industry, Topall products for many manufacturers imitate object and reference standards, must rely on constant innovation and reliable quality.
Topall product reliability not only for its own products has won a reputation, but also adds a customer Topall trust, so give us other products of other manufacturers operating convenience. Such as: Tower cranes, concrete pumps and other international trade shows strong growth momentum.
For mechanical products, after-sales service is an indispensable means to consolidate the market, Topall established sales channels in the same time improve the service system, using their own technical staff to go out to solve difficult problems and routine maintenance of the combination of agents, the company has been in Pakistan and other countries Setting long-term overseas service personnel, and actively Nepal, India, South Africa, Kenya and Tanzania agent training service personnel.
For many domestic enterprises imitated copies Topall products, on the one hand, the company strengthen its protection of intellectual property, apply for "TOPMAC" trademarks, and patents related to the other, the progressive implementation of the strategy to go out, and end customers to shorten the distance reduce intermediate links, the strength of the company stronger, more competitive, and strive to "TOPMAC" playing an international brand.