Housed Separating Drum, Drum Magnet, Drum Rotates

Magnetic Drum Separator
YT Drum Magnet are designed for continuous self-cleaning of metal contaminants from product flow streams. The materials usually have the characters of dry, bulk and have a high concentration of iron contaminants contained. The main benefit of this unit is working without line stopping.

Drum Magnet has a magnetic part of 180 degree arc internal which is stationary. The other half space is totally non-magnetized. When material drops onto the drum cover surface, the metal contaminants will be attracted on the magnetic part while materials pass through. As drum cover is rotating invariable, the iron contaminant will follow its orbit to non-magnetized part and consequent it discharged down.

YT Magnetic Drum Separator is a drum magnet with a housing outside for mounting purpose. It has all the benefit of drum magnet but easier to installation.

Features:
1. Finishing: Mirror polished allover where material will contact while outside house Brushing or Sand blasted
2. Material of shell: 100% SS304 outside.
3. Magnetic strength: multiform magnetic strength standard
4. Customer designs, specifications can be fulfilled.

How to select our product?
Please advise us the above necessary information to make enquiry. If you are not in a position to offer such information, also please feel free to contact our engineer and discuss the application condition, like material, hourly volume and so on.
T Magnetic Rotary Separator is used to remove the ferrous contaminants from the material that is apt to caking and bridging. These materials, like power with high moisture which is certain viscous, is easily to cake using fixed magnetic separators. However, the rotary action will scatter the material and make more contaminants attracted on the rods. This unit embodies unapproachable capacity compares to other fixed separator.
Construction:
YT Rotary Grate Magnetic Separator consists of a cyclic magnetic bar group and a housing outside. A motor is necessary to drive the magnetic rods rotating.
Features:
1. Finishing: Fine polishing and well welding to meet food grade.
2. Material: All the tube, frames and housing are stainless steel with seamless steel tube
3. Magnet: High strength rare-earth Magnet.
4. Working Temperature: Standard working temperature is80 Degrees Celsius, but if high temperature is required, we can offer up to 350 Degrees Celsius to meet your special applications
5. Type of mounting: Round and Square, flange and quick release clamp are decided by customer...
6. As rare earth magnets are extremely powerful and tramp metal is very difficult to remove by hand. We are ready to offer you an easy-clean design.
7. Motor: Please offer requirements like IP, Voltage, Frequency if possible.
8. Customer designs, specifications can be fulfilled.

Application area:
Products are of some moisture, a little viscous that have bridging problems.

How to do cleaning?
In order to ensure perfect performance, it has to check periodically. Once it needs to clean, please shut down the power. Then release door latch, draw out the magnetic core and do the wiping. Use extreme caution and wear gloves during the process.
How to select our products?
Please advise us the above necessary information to make enquiry. If you aren't in a position to offer these information, please feel free to contact our engineer and acquaint us with the application environment and material condition.