Additive

1. This product is a high boiling point alcohol esters organic compounds.
2. Type: GV100
3. Material Properties: This product is colorless transparent liquid of low odor. It is insoluble in water and soluble latex particles. And it is miscible with ethanol, ether, acetone, benzene, toluene, ethyl esters and other organic solvents.
4. Physical Parameters:
Project Unit Physical constants
Appearance Colorless transparent, no mechanical impurities
Content % > =99.6
The boiling point centigrade 287
The moisture Wt% < =0.1
The proportion of 20/20centigrade 0.95
Free acid mgkOH/g < =0.1
Viscosity at20centigradec. P 12.0
The evaporation rate Butyl acetate=1 slowly
Flash point 160
Solubility GV100 in the water at20centigrade wt% < 0.06
Water in the GV100 at20centigrade wt% < 1.00



5. Properties And Uses: The GV100 Film-forming additives applies into waterborne polymer latex paint, easily mixes with emulsion, and at higher levels, does not affect the stability of the coating, it is a strong solvent emulsion polymer.
A. Effectively reducing the minimum film-forming temperature of emulsion paint, minimum film forming temperature can reach 0? .
B. Effectively prevent smearing cracking of coating adhesion, scrub resistance has significantly improved.
C. Can obviously improve the film forming performance, and improve the gloss of paint film, strength and resistance to pulverization performance and enhance the flow flat.
D. Can excellent wet membrane performance, improved weather resistance and color development.
E. Good and good storage stability freeze-thaw stability.


6. Scope of Application:
Widely used in pure acrylic, styrene acrylic, wax, silicon acrylic-acid latex;
Can be used as propionic acid baking varnish and other baking varnish solvent, the printing ink, textile dyes and advanced baking enamel do high boiling point
Solvents;
GV100 film-forming agent has been widely used in exterior latex paint, really stone, multi-color, waterborne wood coatings, water-based industrial paint, etc.


7. Method of Application:
Ordinary architectural emulsion, GV100 film-forming additives added quantity for emulsion commonly addition amount of 3% - 6%. No more than latex solid content of 12%, will not affect the stability of the emulsion; Freezing point is very low, do not need special treatment in winter; In different construction season, under the condition of different temperature and humidity, can be adjusted as appropriate. If can be divided into two times to join, can give full play to its functions.
A. To join in grinding phase 1/2 amount, will help color/padding of wetting and dispersing
B. Add 1/2 amount at paint mixing stage, will help to suppress bubbles.



8. The Packing and Shipping and Storage:
A. This product in galvanized iron drum packaging, net weight is 200 kg.
B. Should handle with care during transportation, do not inverted, should avoid collision fall, prevent the rain and sun light exposure, and in conformity with the relevant provisions of the ministry of communications.
C. Products are non-toxic, and does not belong to flammable, explosive material. According to Normal goods transport.
D. Contact with skin, rinse off with water and soap.
E. This product should be kept in dry and ventilated place, storage temperature should be lower than 50? .
F. The product from the date of packaging, effective storage period for two years. If the storage period exceeds two years, according to indexes recheck the results, if they meet the criteria can still be used.