1 set of Spring feeder ( loader )
1 set of Double-Screw Extruder type
1 set of Vacuum calibration table
1 set of Hauling-off Machine
1 set of Cutting machine
1 set of Stacker
Double-Screw Extruder Type SJSZ80/156
Item Description Unit SJSZ80/156
1 Output Capacity Kg/h 360
2 Number of the Screws 2
3 Diameter of the Screw mm 80/156
4 Rotating Direction of the Screws Forth & Reverse
5 Rotation Speed of the Screw r/min 1-34.7
6 Available Working Length of the Screws mm 1430
7 Main Motor Power Kw 55
8 Speed Adjusting Mode frequency conversion adjustable, inverter from OMRON
9 Gear reducer Rigid-gear surface low noise design
10 Heating Capacity of the Screw barrel Kw 24 ( casting-aluminium electric-thermal elements )
11 Material of the Screws and the barrel 38CrMoA1
12 Nitriding Depth of the Screws and the barrel mm 0.5~0.7
13 Nitriding rigidity of the Screws and the barrel HRC 50~55
14 Cooling Mode of the Screw barrel by air cooling
15 Indicators Melt pressure & temperature indication by gauge
16 Temperature controller Brand: Omron, Japan
17 Element of Electric System ( contactors, buttons, switches ) Brand: Shneider
18 Power of the Vacuum Pump Kw 1.5
19 Max. Vacuum Degree MPa -0.093
20 Cooling Water Consumption L/min 1~3
21 Plastic Material Feeding Mode By Fixed-quantity Screw
Feeding Device
22 Rotation Speed of the Feeding Screw R/min 3.5~47 ( frequency conversion )
23 Height of the Screw Axes mm 1000
3. Vacuum Calibration Table Type ZDY-500
Item Description Unit ZDY-500
1 Length of the table mm 6000
2 Material of the tank stainless steel
3 power of vacuum pump and quantity Kw 5.5*2
4 Water pump power Kw 1.5*1, 0.75*1
5 max vacuum degree MPa 0.02-0.09
6 valid length of holding mold mm 5900
7 vacuum interface and water pip interface PCS 32 /32
8 max vacuum exhausting m3/h 180
9 Up-down Adjusting Range mm ± 40
10 Left-right Adjusting Range mm ± 40
11 Axes line height mm 1000
4. Hauling-off Machine type QYY-500
Item Description Unit QYY-500
1 Hauling Motor Power Kw 4
2 max hauling force N 30000
3 Hauling moving Speed m/min Up to 0.3-4.5 m/min
4 pedrail width and valid length mm 500/2800
5 pedrail clamping unit adopt pneumatic clamping
7 Speed adjustment Frequency conversion, Inverter from OMRON
8 Axes Height mm 1000
9 Element of Electric System From Siemens
5. Cutting machine type QGY-500
Item Description Unit QGY-500
1 Saw diameter mm Φ 400
2 Cutting motor power KW 3
3 cutting direction from down to up
4 Rotation speed Rev/min 2840
5 cutting time and moving length 1-5sec/hypo; 0-500mm
6 Material of Cutting Saw Alloy steel
7 Clamping Mode Pneumatically Drive
8 dust absorption unit blower: 1.5kw, round bag style
9 Cutting Control Pre-set length, Automatically Cutting, or manual operation
10 Electric elements Brand: Siemens
6. Stacker type SFL-6000
Item Description Unit SFL-6000
1 Working Mode Pneumatically drive
2 Drive of discharging frame pneumatic; 63× 100 cylinder-2 sets
3 Material of panel 1Cr18Ni9Ti Stainless Steel
4 Working length mm 6000
5 Axes Height mm 1000
6 Material of the tilting plate Stainless Steel
7 Figure Dimension Mm 6000× 700× 1250
8 Weight Kg 450
| Contact | www.extruder-cn.com +86-18754200919 (.) +86-532-86620998 |
Qingdao Leader Machinery Co., Ltd., is a specialized supplier and manufacturer of plastic pipe, sheet and profile extrusion lines and other accessary machineries, such as plastics pelletizing recycling lines, mixers, crushers, etc. We have a good market all over the world, because the quality of our machineries and warm after-sale service is guaranted.
We have supplied machineries to Middle East(UAE, KSA, Jordan, Egypt, Yemen, Iran, Oman), Middle Asia(Kazakhstan, Uzbekistan, KYRGYZSTAN, TURKUMENSTAN), East Europe(Russia, Ukraine, Latvia, LITVA, Estonia, Albania, Romania), Africa(South Africa, Kenya, Tanzania, ZIMBABWEE, Botswana, Libya), South and Middle America(GUATEMALLA, Mexico) and so on.
Choose our machineries, and let's earn the world. Awaiting for your inquiry sincerely.
Our products was certified by ISO9001-2008, CE, and GOST.
