Purpose:
Waste tire recycling system is used to shred waste tire into rubber powder.
Process Flow:
Waste tire--Cutting loop mouth--Cutting strip--Cutting dice crushing filtering--Magnetic separating filtering--Finished products.
Processing Method:
Physic mechanical crushing method at normal temperature of waste tire, no chemical raw material is required, no waste gas, waste water and soot are discharged, and the cooling water of the equipment is reused, no emission, equipment noise is within the range specified by the country(GB20055-2006), fineness of rubber powder produced by it is adjustable(10 to 30 meshes). The process is as follows: Breaking down, crushing, filtering, magnetic separating, grinding and then be finished.
Ditails of the production
Ring cutter:
Usage:
1. It will cut the whole tire into sidewall of tire and inner circle.
2. Easy to operate and safety.
Productivity 30 Piece/h
Power 3KW
Adapt tire 650--1200mm
Dimensions 1600*900*1500(mm)
Structural principle:
1. The device consists of frame, motor, reducer, transmission, supporting frames, knife, tools and other components.
2. Knife is made from alloy and hard waer-resisting.
3. Motor and reducer connected by coupling, compact structure, simple operation, easy maintenance.
Function:
1. It will separate the sidewall from the top of tire's connection, so that tire sidewall and the top are completely separated.
Strips cutter:
Usage
1. It can cut all kind of tires, rubber sheets into strips.
Productivity 20 Piece/h
Power 4KW
Adapt tire 650--1200mm
Dimensions 1400*800*1550(mm)
Structural principle
1. This equipment mainly consists of two blades, motor and reducer, frame and transmission mechanism etc.
2. Knife with special materials, hard wear-resisting, can relapse grinding use.
3. This equipment shear force, low energy consumption, uses a low speed, easy operation, safety.
Function
1. It will cut sidewall into wide of strips is 3-5 cm, and tire circle reserved.
Rim cutter:
Usage:
1. It will cut the 3-5cm strips into 3.5cm tire block.
Productivity 1000KG/h
Power 7.5KW
Dimensions 1100*900*1150(mm)
Structural principle
1. The device consists of frame, motor, transmission mechanism, balance equipment, two move knives and a fixed knife, and the compression gear etc.
2. Knife is made from alloy, hard wear resistant, can be used after repeatedly grinding.
3. Uniform speed of the device, shear force, low energy consumption, easy operation and safety.
Steel wire separator
Usage:
1. It will separate the steel and rubber from tire circle mouth parts.
Productivity 60 PCS/h
Power 11KW
Dimensions 1500*900*1300(mm)
Structural principle
1. The device consists of frame, motor, reducer, transmission mechanism, communication and regulation of body roll and so on.
2. Ditch is made of alloy, roll, hard wear resistant, can be used repeatedly surfacing repair.
3. This equipment has simple structure, high efficiency, low energy consumption, strong practical, easy operation, and safety.
Equipment name |
Quantity |
Equipment specifications and function is introduced |
Main
machine |
Rubber crusher |
1 |
Type: XKP400 /XKP450 /XKP560
Scrape tire rubber pieces and miscellaneous glue cyclily grinds broken. |
For
With
a
set |
Steel wire separator |
1 |
1. Make tire side and tire top joint use a knife to slice;
2. Make the side of the tire and tire top complete separation. |
Strips cutter |
1 |
Cut off the side of the tire tire cut into strips, tires circle mouth retained |
Rim cutter |
1 |
Cut into strips of tires, cut into 3.5 centimeters square blocks |
Big vibrating screen |
1 |
Make powder for the first time sorting (8-10 mesh) |
Small vibrating screen |
1 |
Make powder on the second sorting (20-30 mesh) |
Big conveyor |
1 |
Used to transport not reached mesh request return to host continue powder and broken |
Magnetic separation units |
1 |
Make the metal wire powder extraction separation |
Defibering
machine |
1 |
Make the fiber extraction MAO powder |
Steel wire separator |
1 |
Make tire of coarse steel mouth circle parts with rubber complete separation. |
|
Remarks |
Above unit is in the process of tires used to crush the machine |
Xinxiang Zhongyuan Machinery Co., Ltd.Is a professional and high-tech company to product waste tire recycling machine and reclaimed rubber product line.With a wide range, good quality, reasonable prices and stylish designs, our products are used in many industries.
We have various and abundant excellent equipments, it is a large-scale machinery manufacture enterprise involving mechanical research, development, design, production, sales, service, import and export.Our production sold throughout the domestic market and exported to Thailand, Vietnam, Malaysia, India, Russia and other countries and district.
In addition, we always uphold market-oriented and technological progress as the driving force, take customer satisfaction as the criterion management concept;Make with international famous brand is our pursuit.
Here we welcome present and future customers from all walks of life to contact us for a harmonious business relationship and achieving mutual success!
