Quick Details
Brand Name: RZG garnet abrasive, industrial rock garnet
Model number: Garnet 8/12, 20/40, 30/60,80mesh
Usage: Abrasive blasting, surface preparation, waterjet cutting
Typical Physical Characteristics
Specific Gravity | 4.1g/cm3 |
| Bulk Density | 1.9-2.4g/cm3 |
| Hardness | Mohs 7.5-8.0 |
| Chloride | less than 7ppm |
| Dust level | free dust |
| Free silica | less than 0.1% |
| Particle Shape | Sharp angular |
| Particle size | 0.1 to 1.5mm |
| Cleaness | Sa3 |
| Melting point | 1,250ºC (2,282ºF) |
| Conductivity | less than 10ms/m |
| Color | Pinkish, bright red to dard red |
Product Description
RZG garnet abrasive is composed of natural almandine garnet abrasive that are known for its natural hardness, durability and abrasive characteristics.
RZG Garnet abrasive provide a perfect sysmbiosis of of grain size, density and hardness / durability. This ensures optimum abrasive efficiency in terms of lowest abrasive consumption and highest production rates at safe environmental and health conditions.
It is a cost effective alternative to silica sand, mineral slags and steel grits and shot because of its low consumption and high productivity and can be recycled 5-10 times depending on the application due to its superior toughness and low friability..
RZG Garnet is minded and proceed by the world's largest producer of industrial garnet situated in Western Australia. It is proceed to the highest standard of quality in respect of mineral purity and meets the stringent requirement of ISO11126-10:2000 for chloride and free silica content.
Benefits of using RZG garnet for abrasive blasting
Low Dusting
Blast cleaning with RZG almandine Garnet abrasive means significantly lower dust emissions because of the incoherent of the material and rapid settling due to its high specific gravity. This ensures minimum disruption and danger to adjoining operations and improved operator visibility and safety.
High Productivity
RZG almandine Garnet abrasive is very fast cutting due to the large number, speed and shape of grains impacting on the surface.
Superior Surface Quality
RZG almandine Garnet abrasive grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removing all rust, soluble salts and other contaminations. The blasted surface is free of embedments and free of rogue peaks and troughs. SA3 white Metal is effortlessly achieved. A surface profile of 50-75 microns is easily achieved along with a much greater number of peaks per unit area.
Improved Health and Safety
RZG almandine Garnet abrasive is non-toxic. There is no silicosis hazard, leachable heavy metals or radioactive contaminants. Lower consumption and recyclability result in greatly reduced disposal volumes of non-toxic product.
Recycling
RZG almandine Garnet abrasiveis suitable for multiple usage. It can be recycled up to 8 times or more without losing its superior cutting ability. All of which adds up to natural, clean and cost effective blasting.
Surfaces Cleanliness
The ability of paint system to adhere to the substrate and resist corrosion is determined by the cleanliness and profile of the substrate. Use of RZG almandine Garnet abrasive as recommended provides the highest quality because:
Even Profile
The use of RZG almandine Garnet abrasive totally eliminates rogue peaks and troughs leading to a direct reduction in the amount of paint needed.
Packaging & Delivery
- 1 ton (2,200lbs) jumbo / bulker bags with 40 x 25kg (55lbs) small inner bags
- 1 ton (2,200lbs) jumbo / bulker bags without small inner bags
- 40 x 25kg (55lbs) bags shrink wrapped on a pallet
To discuss your packaging requirements in more details, please Contact Us.
Pls. feel free to contact us if you have requirment. thank you!
Rizhao Garnet Ltd (RZG) is a new leader in garnet abrasives committed on garnet mining, processing and distributing full grades industrial almandine rock garnet since 2009.
A major strength of the company is the huge size of its garnet deposits and therefore its ability to supply the market with a safe, reliable, consistent for a long time. RZG has acquired several large scale garnet properties grading over 80% with a total reserve of over 300 million tons which is largest all over the world.
The establishment of our first wet and dry processing plant in Rizhao city was a significant milestone in establishing the production of RZG garnet as high quality abrasive with proper quality control. RZG 's Rizhao processing plant covers an area over 58, 000 square meters and equipped with the China only one full automated computer-controlled processing line, ensuring annual output of 100, 000 tons garnet abrasive which is largest in China garnet industry. Meanwhile, RZG's newest bigger garnet processing facility and warehouse based in Lianyungang in Jiangsu province is under construction now and will be completed by end of 2015. The facility will initially produce around 600, 000 metric tons per annum, which will grow as our worldwide sales efforts expand. The mine produces the standard sandblast waterjet and water filtration grades and will also produce a 8/16 mesh, 10/20mesh coarse grade product for particularly thick sand blasting applications.
RZG garnet consists of totally natural almandine rock garnet known for its natural high hardness, durability, and abrasive characteristics. It is a crystalline hard rock garnet which produces very sharp grains during 4 times of crushing. These sharp angular grains together with its typical high hardness provide superior cutting speed and enable RZG garnet to perform other garnet abrasives.
RZG garnet's high standard of processing and quality control system ensures highest standard of quality and meeting most stringent requirements for chloride and free silica contents.
Available RZG garnet abrasive and RZG JadeBlast abrasive are readily to serve your all kinds of abrasive blasting, waterjet cutting, water filtration application and etc. RZG produces a full line of standard garnet powders. In addition, we produce custom and specially grades and products per customer specification
