Waste tyre recycling machine
1. Ring cutter
This waste tyre recycling machine mainly used to cut the sidewall of steel wire tire, and then to the next step of segmentation. First, put the tire on the platform, then rotate the hand wheel, the three claws will stick the inner tire firmly, Second, Starting power, work platform will rotation, cutting tool according to need to cut tire slowly step by step. Until the tire side cut off.
2. Strips cutter
Strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for special materials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.
3. Block cutter
Block cutter is designed to cut car, truck and rear tractor tire. Range is up to 120cm truck tires. The tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system, The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.
4. Bead wire separation
Be utilized to separate rubber and steel wire of bead in order to get whole steel wire.
Feature: It is easy operation, easy to be installed and maintained high efficiency and clean etc.
5. Tyre crusher
This waste tyre recycling machine is mainly used to crush waste tire and rubber. The structure is gear transmission
.
Type
Technical parameter
|
XKP-400
|
XKP-450
|
XKP-560
|
Front roll diameter(mm)
| 400
| 450
| 560
|
Rear roll diameter(mm)
| 400(Groove roller)
| 450(Groove roller)
| 510(Groove roller)
|
Working length of rolls(mm)
| 600
| 650
| 800
|
Front roll surface speed(m/min)
| 17.32
| 23.2
| 24.56
|
Friction ratio
| 1:1.38
| 1:1.38
| 1:1.30
|
Max.nip(mm0
| 8
| 8
| 15
|
Motor power
| 45
| 55
| 75
|
Overall dimension: length×Width×Height(mm)
| 3950×1800×1780
| 4770×1846×1835
| 5064
|
The company owns powerful technical strength, advanced technics, the best design and strict quality guarantee system, which owns a high repution in China rubber machinery industry.
The main products are plate vulcanizing press, open rubber mixing mill, banbury intensive kneader, extruder, rubber and reclaimed rubber machinery, within the (outside) tires complete set of machinery.The products have been sold to more than 20 provinces and cities in China and have been exported to more than 10 countries and areas.All of the products are designed visually by three-dimension CAD design, quickly built module, limited element analysis, analogue action and interfering inspection.The combination of three-dimension CAD system and internet guarantees the synchronization with internatinal advanced technology.The combination of three-dimension CAD and CNC numeral process center realizes the transit from traditional manufacture to modern three-dimension manufacture.At the same time, the company keeps good contact with several universities and research institutes.
The company takes"To live by quality, To develop by reputation, To innovate by science and technology, To keep improving all the time"as managing ideas, and insists on the principle of "Quality is the first, Reputation is the?First, Client is the first" that will provide you the best service.
