Shaanxi Ibrick Technology Company Limited >> Clay Brick Factory Full Automatic Brick Cutter

Clay Brick Factory Full Automatic Brick Cutter

Clay Brick Factory Full Automatic Brick Cutter
Price: US $ 9800/Piece
Trade Terms: FOB,CFR,DAP
Min Order: 1/Piece
Pay Type: L/C,T/T
clay brick factory full automatic brick cutter 

Ibrick China full automatic clay brick cutting machine 

Application and Features
The platform of brick cutter is made from hard stainless steel, wear-resisting for the brick column friction, this platform has features such as: long using life, less sticking to the mud, less oil consumption up to 30%, easy replacement after worn, avoiding reporting as worthless for the whole machine, vertical cutting surface, without waste bricks, fully automatic operation, high efficiency, and program controlled.

The machine has a special system to avoid deviation movement, it does not need to be adjusted, the roller is made from stainless steel and will arrive at designed position automatically to avoid wasting bricks. The platform saves oil up to 70% to 100% comparing to ordinary brick cutter. The pushing plate is also made from stainless steel, with the features of wear resistance, and 3 times of using life comparing to ordinary brick cutter. The machine is automatic, without any operation during work, it does not need manual operation, saving manpower and increasing work efficiency. The maximum pushing frequency of the pushing plate is 41 times/minute, and can cut double columns and tall blocks.
Technological Parameters
Cutting WidthCutting HeightMax. Cutting FrequencyCompressed Air PressureCutting LengthPower Capacity
290mm250mm20times/min0.6-0.8MPa1000-1280mm7.5kw+0.55kw
 
Column Num. per MinuteMax. Return FrequencyCylinder Diameter*StrokeDimensionWeight
18-20column/min41 times80*2004500*2150*1050mm1200kg

Full auto clay brick cutter machine
Brick Column Cutter
This machine is used for cutting the adobe strip from extruder according to the length requirement of adobe piece cutting machine to adobe section, and feed them into piece cutting machine, to meet different requirement of production technology, our company produces two kinds of different products: vertical section cutter, circular cutter . the machine may adjust the cutting strip length and cut the adobe strip automatically . the vertical cutter has the feature like vertical cutting, small stub, and high efficiency.

Clay brick cutter
This machine is used for cutting the adobe strip from extruder according to the length requirement of adobe piece cutting machine to adobe section, and feed them into piece cutting machine, to meet different requirement of production technology, our company produces two kinds of different products: vertical section cutter, circular cutter . the machine may adjust the cutting strip length and cut the adobe strip automatically . the vertical cutter has the feature like vertical cutting, small stub, and high efficiency.
Structure and Working Principle
The ordinary cutting system is mainly consisting of pneumatic column cutter and light brick cutter.
The pneumatic column cutter is mainly consist if base frame assembly, motor assembly, arm assembly, cylinder assembly, portal frame assembly, guide-bar assembly and buffer. The machine is used for cutting the mud columns and delivering the brick columns to the brick cutter quickly.
The light brick cutter is mainly consist of base frame welding assembly, driving roller parts (electric motor, reducer, slide roller and etc.), shredding parts(inner/outer), power unit(electric motor, reducer, mantis arms, connecting rod, guide-bar, pushing head and etc.) , braking parts, guardrail welding and etc.
Working principle

Cutting brick columns:
It is achieved by ordinary pneumatic brick column cutter. When the extrude clay column being pushed to the portal frame and contact the resist roller, it is stopped by the resist roller. Meanwhile, the clay column push the pulley(clay column and pulley synchronization) to go forward to make the inductive switch react, the control program order the cutting cylinder start, the piston rod of cylinder push-out and drive the steel wire in the limb to cut the clay. After the clay cutting completion, the pulley i\go forward continuously, the roller plant resister in portal frame is forced open by the block which installed at the both sides of machine body, the portal frame is opened automatically, the clay column is send away by the belt conveyor of faster roller. Meanwhile, the pulley is bringing back to the original place by repeat-vertebra and wait for the next cutting.

Brick cutting:
It is achieved by brick cutter. The clay column which sends by brick cutter will arrived the clay column locating guard plate through the table-board roller,after the optoelectronic switch detect the clay column, through the control program to make the separation cylinder start, and pull-out the separate leader, and connect the combined arm, the power of electromotor is reduced by reducer and spindle box, the crank rocker will bring the pusher to make reciprocal rectilinear motion, while the pusher move forward, the clay column will be pushed to the steel wire to achieve the brick cutting, while the pusher move back, the separate-leader will bring back to home position by return-tension, and then to separate the combined arm, cut-off the power(rotate speed), the pusher through the proper braking and return to position nearby the end-stop point(the position for next cutting ) through the inheritance, and then waiting for next cutting. 
Clay brick cutter machine model specifications :
Specification ModelLength (mm)Max Cutting Degree(f/m)Power Requirement (kw)Exterior Dimension (mm)
QTQD-1125417Y4-5.52320x1320x1100                                         1700x2000x1560
QTQD-1G125417Y4-7.5
QTA2+QPO1143017Y4-7.55000×2200×1750
 

Prod Model: QTQP-1G
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Product Name: Full Automatic Brick Cutter
Suitable Brick Type: Solid Hollow Brick , Tile
Cutting Width: 290mm
Cutting Height: 250mm
Max. Cutting Frequency: 20times/Min
Compressed Air Pressure: 0.6-0.8MPa
Cutting Length: 1000-1280mm
Max. Return Frequency: 41 Times
Column Num. Per Minute: 18-20column/Min
Cylinder Diameter*Stroke: 80*200
Certification: TUV,BV
Type: Clay Brick Cutting Machine
IBRICK is the technology initiator whom firstly professional supply clay brick sintering two-step stacking-firing process in the world. We always implement rigorous, secure, and integrated industrial chain management and provide professional engineering management, technology solutions, equipment purchasing and etc. For the clay sintering hollow bricks, decorative brick, insulating block, paving bricks, western-style tiles; Split brick projects all around the world. Our service include below items.

The inspection of raw materials---raw material industrial test, providing specific and targeted technology solutions according to scientific data tested;

The complete technology design--- material processing, molding, drying, firing, packaging, unloading and etc.

The complete production line equipments------- supply and installation the most economical and high-quality equipments.

The construction of complete set production line-----contracting to build the EPC projects for building materials.

The accurate and timely local services-------- providing the production management service, the lifelong technology service support, make every projects to create more value for each users.

We are willing to make our progress with you hand in hand and become impeller for world-wide brick-making cultural by our constant innovation and non-stop efforts.

Send your message to this manufacturer

  • Shaanxi Ibrick Technology Company Limited

More >

Other Products From This Manufacturer