49~490N ASIDA Digital Push Pull Force Gauge Introduction
Asida force gauge is used for push and pull testing, insertion force testing, damage experiment, etc..
49~490N ASIDA Digital Push Pull Force Gauge FeaturesDZC series force gauge accuracy is better than that of 0.2, DZE series accuracy is better than 0.5.
Minimum readings is up to 0.001 Kgf.Unit can be adjustable between Kgf, N, Lbf with automatic conversion.Four digit LCD display. The display is reversible, which is good for the install with test bench in vertical or horizontal. Backlit display. Keep the peak value of test.
The force gauge will automatically shut down if without any operation in 9 ~ 10 minutes to save power consumption.- The battery alarm
the alarm symbols will flash to remind the charging up when the internal NI/MH battery voltage is very low.
49~490N ASIDA Digital Push Pull Force Gauge Parameters| Specifications | DZC series (Universal) | DZE series (Economic) |
| Models | DZC-5 | DZC-10 | DZC-20 | DZC-50 | DZE-5 | DZE-10 | DZE-20 | DZE-50 |
| Measuring Range | ±5kgf | ±10kgf | ±20kgf | DZC-50 | ±5kgf | ±10kgf | ±20kgf | ±50kgf |
| ±49N | ±98N | ±196N | ±490N | ±490N | ±98N | ±196N | ±490N |
| ±11Lbf | ±22Lbf | ±44Lbf | ±110Lbf | ±11Lbf | ±22Lbf | ±44Lbf | ±110Lbf |
| Resolution | 0.001kgf | 0.01kgf | 0.01kgf | 0.01kgf | 0.001kgf | 0.01kgf | 0.01kgf | 0.01kgf |
| 0.01N | 0.01N | 0.1N | 0.01kgf | 0.01N | 0.01N | 0.1N | 0.1N |
| 0.01Lbf | 0.01Lbf | 0.01Lbf | 0.1N | 0.01Lbf | 0.01Lbf | 0.01Lbf | 0.1Lbf |
| Accuracy | 0.2 scale | 0.5 scale |
| Precision | ±0.2%F.S±1 digital peak | ±0.5%F.S±1 digital peak |
| Unit | Unit can be swappable between Kgf, N, Lbf and automatic conversion |
| Measured Value | The max value, The instantaneous value |
| Display | Four digits large LCD screen, display value can be positive and negative to the switch, which is good to installation in the vertical or horizon test bench. |
| Saving Energy | Low consumption design. Tension gauge will automatically shut down if no operation in 9 ~ 10 minutes |
| Backlight | Green backlit display |
| Charging | Charging notice will appear when battery power is insufficient, charging time is 3.5 hours. |
| Allow load | 200% F.S (more than 110% F.S, LCD display OL flashing alarm) |
| Keep Peak | Can catch the peak of test, also can be automatically lifted |
| Output Form | RS232C, USB (provide interface and program to connect online with PC, which can realize real time record and display the test data of tension in the PC, automatic generate standard test report which records of charts and data analysis results. The reports can be directly printed, also the test data can be exported to a specified file) | No |
| Communication Method | Can be connected to the computer | No |
| Capture rate | 1000 times per second |
| Battery | 4.8 V internal NI MH rechargeable batteries |
| Charging | The external AC charger, DC9V500mA |
| Operating Temperature | 0~+50ºC |
| Operating Humidity | 45~75%RH |
| Weight | 470 g |
| Overall Dimensions | 175x67x32.5 mm |
49~490N ASIDA Digital Push Pull Force Gauge Packing- Weigh: 470 g
- Size: 175x67x32.5 mm
49~490N ASIDA Digital Push Pull Force Gauge ServiceThe warranty of our company's equipment is 12 months. During the warranty period, we will be responsible for the repair or re-placement the damaged or broken-down equipment free, except that the malfunction is caused by the customer's fault.
We will respond to the technical problem putted forward by the customer within one hour. If the equipment breads down, our company guarantee that we will send maintenance staff to solve the problem within 48 hours. As for the customer in remote areas, we will negotiate with customers about the time.
We have established nationwide network of maintenance service of equipment. We will track the equipment during its life cycle, and appoint officers to visit the customers regularly (call customer quarterly), so as to discover the potential failure and resolve it. Taking precautionary measures makes equipment in good working dondition.
49~490N ASIDA Digital Push Pull Force Gauge Certificate
Established in 1997, Guangdong Zhengye Technological Liability Limited Company is a high and new-tech enterprise and is engaged in researching &developing, producing, selling and after-sale services of the precision detection equipments and electronic materials both in Printed Circuit Board manufacturing field and Lithium battery testing industry.
In recent years, the company is dedicated to researching and developing domestic scientific instruments and equipments through the scientific developing mode of "independent research and development", "introducing, digesting, absorbing and then re-innovating" and "combination involves producing, teaching & researching". We have independently worked out and produced more than 40 kinds of testing instruments and equipments for rigid and flexible board such as X-ray nondestructive inspection equipment, ionic contamination tester, visual inspection machine, impedance test system etc. All of the products have our own intellectual property rights, which also have filled the domestic gap. It has satisfiled with the demanding for high quality inspection of the electronic circuit industry and Lithium Battery testing industry.
In the process of continuous development of the enterprise, we have also won high reputation from the government and this industry and has been awarded as the key high-tech enterprise of national Torch Plan, outstanding national brand enterprise in the 1st and the 2ND China electronic circuit industry, national standardization good behavior enterprise AAA enterprise, fast-growing medium and small enterprises, the national torch plan, the famous trademarks of Guangdong province, the major provincial-supported equipment manufacturing enterprises, technology center of all enterprises in Guangdong and preponderant enterprise in intellectual property in Guangdong, etc. At present, the company's selling market covers the Pearl River delta region and Yangtze River delta region and is expanding to South Korea, Taiwan and other southeast Asia areas.
Zhengye technology of the independent research and development production X-ray non-destructive inspection equipments are widely used in the Lithium battery industry\PCB field and electronic manufacturing process, it is used for Non-destructive testing analysis of the products' internal defects. The whole parts of the X-ray non-destructive testing equipment meets safety requirements both in Europe and USA, which has got the radioactive isotopes and radial device management exemption certificate in Guangdong Province.
In future, Zhengye will continue to provide sincere service for customers and further focus on outstanding technical innovation. We will constantly improve the accuracy and stability of testing instruments, strengthen our brand construction with the aim to be a professional supplier of precision detection equipments and electronic materials and Lithium battery testing industry.
