Bipolar crusher
Description:
1.The two-stage crusher double rotor poles are crushing .
Mutual series two sets of rotors, the rotor to crush the will after material is rapidly rotating lower rotor using hammer in a crushing cavity material, such a rapid collision each other, smash each other, so as to achieve the hammer powder, powder material effect, and then directly discharged.
2.Without screen plate, wet material with high moisture content, never plug .The traditional mill with grate plate, so don't adapt to the moisture content higher than 8% of the raw material, when the water content is higher than that of their raw materials 10%, extremely easy blockage, makes the hammerhead can not rotate, the inside materials can not be discharged smoothly, some even burning motor, serious impact on the production of.
Design crusher double stage no grate plate, no strict requirement for water containing materials, does not exist completely material paste plugging sieve plate problems, the more there is no can not be discharged in a fine powder, repeat grinding problems, high crushing efficiency, there won't be a hammer is invalid, wear phenomenon.
3.The two-stage crusher wear resistant composite hammer.
The use of high alloy wear-resisting hammer, the hammer handle combination to use, only change hammer, don't change the hammer handle.
4.The two-stage crusher double rotor two comminuted, yield, grain size below 3 mm, 2 mm below accounted for more than 80%.
5.The two-stage crusher hydraulic electric start shell.
Only need one, it would be easy to open, close, not only light and quick, but also safe and reliable, easy to repair.
6.The two-stage crusher unique adjustable gap technology
7.Hammer without repair after worn, it will move the position is used repeatedly, a hammer can top three deputy hammer.
Working principle:
the two-stage crusher with double motor driving, the two mutual connections rotors are high-speed rotating at the same time, the materials input machine will immediately crushed by superior rotor and then fine crushing by lower rotor. Material rapidly collide with each other to be hammer powder and reach the effect of powder material, and quickly forms a discharging granularity of coal cinder particles is less than 3 mm. Our crusher in much degree solves the phenomenon of material moisture and the jam. It can normal use and produce in safety in the thunderstorm day!
| Model | Feed Particle size(mm) | Discharging granularity(mm) | Production capacity
(t/h) | Motor power
(Kw) |
Envelop dimension(mm) |
| RYFS 600*400 | ≤100 | <3 90% | 15-25 | 18.5/15 | 2560×1020×1650 |
| RYFS 600*600 | ≤180 | <3 90% | 25-35 | 22/22 | 2760×1280×1750 |
|
| RYFS 800*600 | ≤270 | <3 90% | 45-55 | 45/37 | 3760×1314×2140 |
|
| RYFS 800*800 | ≤270 | <3 90% | 50-70 | 55/55 | 3500×1400×2250 |
|
| RYFS 1000*800 | ≤360 | <3 90% | 60-80 | 75/55 | 3800×1800×2400 |
|
| RYFS 1200*1000 | ≤420 | <3 90% | 80-100 | 90/75 | 4400×1850×3150 |
|
Technical parameters:
Packing:
Complete machine will be packed in wooden case then load into container
Zhengzhou Ruiyong machinery Co., Ltd. is a company that integrates the design, the research, the manufacture and the marketing and the after-sale service as a whole. It was founded in 1990. Its predecessor is Ruichang Company. Zhengzhou Ruiyong machinery is located in the national transport hub city of Henan Zhengzhou. The geographical position is superior, its factory is 100 meters far from the Cross between Zhongyuan west Road and Hangzhou Road, 2 km north to the Lianhuo high-speed entrance, 15 km south to the airport, 13 km east to the railway station and in the city you can take the bus NO. 11 or 12 to arrive.
The company is one of the biggest suppliers of coal equipment production line in China. Our company is devoted to the development and the research of the coal equipment for many years. Recently, our company has obtained the breakthrough development in the field of new energy and renewable energy equipment manufacturing. According to the national demand for new energy equipment, we have developed a new generation of energy saving products, they specialize in the production of coal rods machine, stick machine, carbon black machine, carbon powder machine, type coal production line equipment, mixer, avoid drying equipment type coal and so on, they are widely used in all fields. At the same time, we have so many departments to serve for the company; They are market research, technology innovation, product design, equipment manufacture, after-sale service, environmental science, network construction and other departments. Our productions have passed the ISO9001, 2000 Quality Certification and 3A Certification. What's more, the company has been awarded the advanced enterprise more than once.
The purpose of the enterprise
Supply the creative, excellent products and programs and service; Comprehensively assist to customers and enterprises to achieve the way to the success
