Weather Resistant Silicone Adhesive Cy-990

1 weather-resistance 2 neutral curing, non-corrosive 3 high movement capability 4 fast speed of curing 5 excellant adhesion Characteristics: Weather Resistant Silicone Adhesive belongs to RTV-1, expediently application between 4~40° C to alcoxy curing system, expediently application between 5~50° C to oxime curing system. Neutral curing, non-corrosive to glass, coated glass, concrete, marble, metal (not including oxime curing system) and most kinds of plastic, etc; Quickly speed of curing, excellent adhesion, middle, excellent movement capability; Excellent resistance to weather, the service life is over 50 years in the condition of general weather; Excellent resistance to low and high temperature change. Little changes of performance at -40~150° C; Excellent adhesive to most common building material, Special material will have better adhesive with priming; Good compatibility with other neutral silicone adesive; Belong to non-dissolvent product, low vulcanization shrinkage and green environmental protection product. 2. Purpose: For weather sealing in glass curtain wall joints; For weather sealing in aluminum, enamel curtain wall joints; For sealing in marble (granite), concrete, tile, metal panel materials ect.; Many other building & Industrial uses. 3. Typical Technology Data: Performance Standard JC/T 882-2001 Measured Value Testing method Alcoxy Oxime Slumpability (mm) ≤ 3 0 0 GB/T 13477 Extrusion (ml/min) ≥ 80 392 336 Tack-Free Time (min) ≤ 180 30 30 Hardness (HsA) / 50 48 GB/T 531 Loss of Heating % ≤ 10 3.3 403 ASTMC 792 Elasticity recovery % ≥ 80 94.0 90.0 GB/T 13477 Tensile strength in adhesion (Mpa) ≥ 0.4 0.91 0.83 Permanent set adhesion Non destroyed Non destroyed Non destroyed Movement Capability % ± 20 ± 20 ± 20 ASTMC 719 Elongation at ultimate strength % / 250 260 GB/T 13477 Stability Store for 12 months at 20~30° C in cool, dry place after date of manufacture 4. Application Standard: Standard GB/T14683-2003 Curtain wall sealing silicone sealant 5. Restriction of Usage Cant be used as structural adhesive; Unsuitable for the surface of all kinds of material that can effuse grease, plasticizer or solvent; Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant; Unsuitable for the frosty or moist surface; Unsuitable for the continually soggy or moist place Cannot be used the product of alcoxy, if the temperature is below 4° C or above 40° C on the surface of the materials; Cannot be used the product of oxime, if the temperature is below 5° C or above 50° C on the surface of the materials. 6. Color and Package: Color: Black, Gray, White or other colors on request Package: 310ml Cartridge net 300ml; 590ml sausage 7. Joint Design and Working Procedure: Please refer to Section The "Technology Instruction of Jianhua Silicone sealant" 8. Technical Service Offer the integral technical data of the adhesive 9. Maintenance: We passed the ISO9001 international quality system certification. And we control the quality according to the ISO9001 System strictly. Insurance agent: PICC