Brief introduction
Gold centrifugal concentrator is an important gravity beneficiation equipment developed by our factory. It is proved by experienced practices that this equipment is high efficient for recovery of placer gold, rock gold, lode gold and monomeric gold in multi-metal ore. It had earned high reputation for replacing mercury plate or any toxic chemical, removing the chemical harm to human body and conductive to environmental protecting.
Sturcture
Feeding slurry pipe
Rack
Tailing pipe
Driving motor
Central transmission shaft
Fluidization water pipe
Concentration discharging pipe
Mineral separation parts: Mineral separation parts divided into inner and outside concentrate cones. Inner is concentrate cone with 6mm thickness Stainless steel inner bushing grooves in ring performance, there are many small holes on the cone liner. Outside is common steel, made up a closed water jacket system with inner cone.
Working principle
(1).Central transmission shaft is driven by motor through belt, and then make the inner concentrate cone rotate in high speed.
(2).Fluidization water is introduced into the concentrate cone through central transmission shaft, and then spraying water to ring groove from inner cone holes, called backwash water. The water pressure level in separation process: 0.03-0.06Mpa.
(3).ineral materials enter into the inner cone groove by feeding pipe, under the high rotating configuration force, heavy ores will be deposited on the groove but the light ores will go upside along the cone liner, and finally going into tailing discharging pipe from cone upper surroundings.During the separation process, make sure the concentration discharging pipe is closed.
(4).After a cycle process, close down the machine and open the concentration pipe to collect the gold concentration.
Technical parameters
Application shows that the recovery rate can be as high as90% in tin ore, Pb ore, antimony ore, sliver ore, gold ore,etc.especially for the case less than 2.5mm heavy ores, can reach to 92%.
Note: The standard slurry density in feeding is 35%, The water pressure level in separation process is 0.03-0.06Mpa. This figure is only for your reference, for example: named the water pressure as A=0.02mpa, B=0.03mpa, C=0.04mpa, and then testing these three figures to check the gold concentration grade, delete the lowest grade matched figure, and then text again to choose the most suitable water pressure figure.
Welcom to inquiry our gold concentrator, i will try my best to offer you most thoughtful consult on gold mining.
Henan Baichy Machinery Equipment Co., Ltd. is a High-tech mining company in China. Our company integrates research and development, designing, manufacturing, sales and after-sales services. The brand products of mine have jaw crusher, cone crusher, sand making machine, high-efficient fine crusher, high-pressure medium-speed mill, vertical mill, micronizer, three-ring mill, ball mill, etc, are in the leading level of the world.
From 2010 to 2013, the achievements of Baichy was rising once again, depending on the great market performance. And we have strong support in the internet marketing. The Customers were increasing and we have much more competition. We never forget: Technological innovation is a fundamental prerequisite for the survival and development, quality is a necessary condition for the production and the quality of service is the lifeblood of business survival and development.
In 2013, the factory moved to Wulong industrial park in Xingyang. And the new factory covers an area of 50, 000 square meters. The technology and quality of products are the most important thing for us.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
