Silicone sealant adhesive for encapsulation
ZR351 clear organic silicone encapsulating gum is a room temperature/heating curing and molding organic silicone materials. This kind of two-component elastic silicone potting, designed to protect in harsh conditions of electronic products.
ZR351 clear organic silicon encapsulating glue used new technology without heating, would be curing. When used according to 1: 1 (weight ratio or the volume in the thorough mixing proportion of A and B two components, products will be in A certain time, form of the elasticity of curing buffer material.
After curing glue has the following characteristics:
Silicone sealant adhesive for encapsulation
Against moisture, dirt and other atmospheric composition
Relieve mechanical, thermal shock and vibration of mechanical stress and tension caused
Easy to repair
High frequency electric performance
No solvents, no cure by-products
Have stable mechanical and electrical properties between -50° C-200° C
Excellent flame retardancy
Self repairing
A, B two components in proportion to remove, stir to mix evenly, vacuum suction bubbles in operation period, remove the need of the potting casting products, if the potting product is too big, can divide times, then potting according to (60 º C / 60 min or 25 º C / 10 hr) can be cured.
Operation caution:
Agent A place for a long time, maybe produce precipitation, mix part A and B access should be paid attention to save after sealing.
Mixing should pay attention to the same direction, otherwise, it will stir with too much bubble; Borders and the bottom of the container sizing material should also stir well, can appear otherwise stir caused by uneven local not curing phenomenon.
Casting the product vacuum pumping, remove again bubble can improve after curing products comprehensive performance.
Temperature is too low will lead to curing speed partial slow, heat cure advice; Potting thickness more than 2 cm above 80 º C not directly in the curing, lest cause explosive together.
ZR351 with contain N, S, P element of compounds and some heavy metal ion compounds, will appear difficult contact curing or not curing phenomenon. These heavy metal ions including Sn, Pb, Hg, Bi, As, etc.
Packing:
Agent A: 10kg/pail; Agent B: 10kg/pail
Storage and transportation:
Part A and part B need to avoid light, heat, save after sealed. (Can be used as the non-dangerous goods transport and storage)
Shelf life: 2 years(25º C).
|
Conventional performance: |
|
testing Item |
testing standard |
unit |
A |
B |
|
Outside view |
visual inspection |
--- |
Clear liquid |
Clear liquid |
|
viscosity |
GB/T 10247-2008 |
mPa@s(25ºC) |
1000±100 |
1000±100 |
|
density |
GB/T 13354-92 |
g/cm 3 (25ºC) |
0.99 |
0.99 |
|
Operation process : |
|
Testing item |
Unit or conditions |
value |
|
mixing ration |
weight ratio |
100 : 100 |
|
mixing ration |
volume ratio |
100 : 100 |
|
Mixed viscosity |
mPa@s(25ºC) |
1000±100 |
|
Mixture density |
g/cm 3 (25ºC) |
0.99 |
|
operating time(1) |
min(25ºC) |
135±45 |
|
Curing time |
ºC/hr |
60/1 or 25/10 |
|
Operation time is a quantity of cement with 100 g. |
|
Typical performance: |
|
Testing item |
testing standard |
unit |
value |
|
needle penetration |
GB/T |
1/10mm |
210 |
|
conductivity factor |
GB/T 10297-1998 |
W/mK |
0.2 |
|
expansion coefficient |
GB/T 20673-2006 |
μm/(m@ºC) |
410 |
|
water absorption |
GB/T 8810-2005 |
(24h,25ºC)% |
0.01-0.02 |
|
dielectric strength |
GB/T 1693-2007 |
kV/mm(25ºC) |
25 |
|
Loss factor |
GB/T 1693-2007 |
(1MHz)(25ºC) |
0.01 |
|
dielectric constant |
GB/T 1693-2007 |
(1MHz)(25ºC) |
3.0 |
|
volume resistance |
GB/T 1692-92 |
(DC500V)Ω@cm |
1.2×10 15 |
|
Remark : All the above data come from 25 º C and 55% RH glue curing conditions after 7 days. |
Shanghai Jorle Fine Chem Co., Ltd., is a manufacturer of Silicone, epoxy and polyurethane, with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in LED, Power, Electronics, New Energy and other industries.
The company is located in Songjiang Shanghai, has completed the annual capacity of 2000 tons, organic silicon epoxy adhesive 500 tons, polyurethane adhesive 300 tons, organic silicone oil 1000 tons, high temperature resistant epoxy resin 200 tons of production scale. In recent years, new on the liquid silicone rubber and pharmaceutical intermediates project, reaching the company's product line.
The company has 50 employees, bachelor degree above for 70% of the total number. The company has established a long-term and stable cooperation with East China University of Science and Technology, Fudan University, Shanghai University, etc. Provide a strong technical support.
"The customer is highest, trustworthiness first" is the tenet of our company. Being an innovative company, our company always pays attention to economic, ecological and social development. Our goal is "to be the best supplier of electronic industry, silicone industry outstanding enterprise".
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
"Science and technology light the passion of Jorle", Jorle is the courage to pursue, and continuously exceeded, and actively innovative science and technology enterprises, we will unswervingly to the integrity as a link, build confidence in the bridge, hold hands with you and work together.
