FRP sheet
Description of Product
FRP corrugated sheet is a new generation roofing material which substitutes asbestos tile and PVC, and is combined with resin and fiberglass. FRP corrugated sheet is widely used in factories, warehouses, supermarkets, and other steel structured buildings. Energy resources are largely saved when applying FRP corrugated sheet, and it really reaches the environmental protection effect. With regard to energy, FRP will be more acceptable in the future.
Good light transmittance
Anli lighting sheet is tested by Guangdong Product Quality Supervision Test Center and Guangzhou Product Quality Supervision Test Centre: 60%-85% light transmittance rate.
FRP Sheet reflects direct lights, and makes it scattered and soft. Avoid direct sunlight and create a better working environment.
Intensity
AnLi Sheets have the high impact and bending strength, and it resists the impact from stone or hail. AnLi Sheets have the high strength / weight ratio, and it offers the ideal choice for many designs.
Physical property
AnLi Sheet is a thermosetting polymer composite material, and the applicable temperature is -40 -120 Celsius. The characteristics for it are as follows, without deformation under strict long-term work environment, no crisp under the cold, no softening under the heat, easy installation, and can be bent.
Anli sheet thermal conductivity is only 0.158w/m. K, and is 1/4 of flexible glass; Therefore, insulation property of Anli sheet is very good.
Thermal expansion coefficient of Anli sheet is 2.2X10-5 mm / mm /Celsius, and it is similar with the steel thereof (1.5X10-5 mm / mm /Celsius). It avoids roof leaking as for thermal expansion and contraction in steel structured buildings.
Density1.5 G/cm3Tensile Strength 100Mpa
Fiber Content>25%Bending Strength160Mpa
Solidification Degree>82%Toughness135 KJ/M2
Gel Coat Thickness20-150UmThermal Conductivity0.158w/w. K
Weathering Film Thickness30-50Coefficient of Thermal Expansion2.2 X10-5 mm/mm/Celsius
Transmittance60-85%Water Absorption0.30%/24hr
Suitable Temperature-40-120 Celsius UV Rate99.9%
The above data are based on samples and the cargo inspection data.
Weather Resistance
AnLi Sheet covers with a good quality anti-aging polymer resin named filoplated, and the gel coat resin is combined with substrate compound key very well by AnLi unique manufacturing process to ensure that the average life of the sheet is 20 years. A UV absorber is added into a sheet; Therefore, 90% of UV light can be filtered out in order to slow fading and degradation of the material.
Fire Retardation
Three levels for Anli sheet: Ordinary level, Grade I and Grade II. Grade I oxygen index: 0I ≥ 32, grade II oxygen index: 0I ≥ 26. They are in line with the requirements of the fire department.
Corrosion Resistance
AnLi Sheet can resist much harmful corrosive gas. This product can be safely used in the occasions of smoky mist, hydrocarbon, peroxide, carbonate, diluted aging materials and other occasions which contains acid or alkali, especially suitable for the sea or the air whose pollution is more serious.
The following table list indicates that the appearance performance of FRP in the solvent heated to 50 Celsius for 10 days.
Specification of Product
Thickness: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Color: Sky blue, dark blue, clear, light green, dark green, opal, etc.
Width: 1220mm to 2100mm
Length: No limit but with the consideration of transportation
Application
Steel structured workshop and warehouse, canopy, parking sheds, corridors, studio lighting, awnings, and greenhouses.
|
Characteristics |
Unit |
Fiberglass Flat sheet |
|
Density |
g/cm 3 |
1.5 |
|
Fiber content |
% |
>25 |
|
Solidification |
% |
>82 |
|
Light Transmittance |
% |
50~85 |
|
Applicable temperature |
°C |
-40~120 |
|
Tensile strength |
Mpa |
100 |
|
Flexural strength |
Mpa |
160 |
|
Impact flexibility |
J/m 2 |
135 |
|
Anti-UV rate |
% |
99.9
|
Zhongshan Anli Plastic Sheet Factory (General Partnership) is a technology private corporation which was set up in 1990. With advanced production equipment, superb production technology and the first-class production environment, Anli contributes to the largest output of FRP&PC Sheets in China and makes efforts in the manufacture, development and extension of FRP&PC products. Our products include but are not limited to FRP corrugated sheets, FRP solid sheets, FRP gel coat sheets, PC solid sheets, PC hollow sheets, PC corrugated sheets and PC transparent Japanese wave products.
Anli has introduced foreign modern production equipment to produce the first national mechanism for lighting sheets since 1993. For more than seventeen years, we have been committed to the development of architectural lighting sheet production, development and promotion. Hundreds of millions of pieces of "ANLI" brand lighting sheets have been provided for customers in China, Japan, Africa, Southeast Asia and many other countries and regions. Anli has been continuing to establish a leading position in the industry.
Adhering to our "leading technology, reliable and innovative" business philosophy and the fully new spirits, Anli will continue to create brilliant achievements.
