Raw material from POSCO
Stainless steel tube for heat exchanger
Specifications:
1) Diameters: 4 - 76.2mm
2) W. T.: 0.4 - 2.5mm
3) Grades: 316L/304/ 304L/310S, etc.
4) Standard: GB/ISO/EN/ASTM/JIS, etc.
5) Application range: Widely use in the foodstuff, medical equipment, power, boiler, cooler, auto, condenser etc.
6) Packing: Inner packing: 1 PC/plastic bag; Outer packing: Bundles in weaving bags or in plywooden case.
Outside path in class deviation mm table 3 |
|
Outside path inIIclass deviation mm table 4 |
Outside path |
Admission deviation |
<25 |
±0.10 |
≥25~38.1 |
±0.15 |
>38.1~50 |
±0.20 |
≥50~63.5 |
0.25 |
>63.5~76 |
±0.30 |
≥76~102 |
±0.40 |
|
|
Outside path |
Admission deviation |
≤10 |
±0.15 |
>10~32 |
±0.20 |
>32~50 |
±0.30 |
>50 |
±0.8% |
|
|
|
|
|
The thick the deviation of admission( do not include the weld sew) in wall of the weld tube is for ruling the wall thick 10% of ±, but minimum admission deviation is the 0.02 mms of ±.
The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ±.
Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
The machine function sees the table 5
table 5
Steel number |
Card number |
The heat handles
Make degree
|
The anti- pulls the strength
MPa |
Accept defeat the strength
MPa |
Extension rate% |
Degree of hardnessHRB |
0Cr19N19 |
304 |
≥1010°C
Nasty and cold |
≥520 |
≥205 |
40 |
≤90 |
00Cr19Ni11 |
304L |
" " |
≥480 |
≥175 |
40 |
≤90 |
0Cr17Ni12M02 |
316 |
" " |
≥520 |
≥205 |
40 |
≤90 |
Jiangyin jinfengtai Pipe Industry Co., Ltd. is located in huashi Park, jiangyin City, jiangsu Province. It is a private scientific&technological enterprise in jiangsu Province. It is specialized in manufacturing and sales of Shengtai Brand industrial steel welding pipes.
The co. Is located in the center of intersectional part of Suzhou, wuxi and Changzhou in the Yangtze Delta. It is 18kms from the jiangyin entrance/exit of Shanghai-Naijing Expressway, it is 20kms from the jiangyin Yangtze Bridge, it is 150kms from the Shanghai Pudong International Airport, it is only one kilometer from the Huaxi entrance/exit of newly built Yanjiang Expressway&Ningtai Expressway. So the geographical location is rather advatageous, both land and air transports are very convenient.
The co. Covers an area of 8, 800 square meters, it has 5, 000 square meters of standardized workshop, it has complete infrastructure. At present, this co. Has92 staffs, including 18 engineers and technicians, 10 inspectors, 8 technical researchers. It yearly produces 5, 000 tons of stainless steel welding pipes use of thermal exchange of the vapor condensers in power plants.