TECHNICAL DATA SHEET
Testing Items Performance
Appearance Black
Density (g/cm³ ) 1.35± 0.05
Sagging propertise(mm) 0
Shore A-hardness(A° ) 61± 3
Tensile strength( Mpa) ≥ 4.0
Elongation at break (%) ≥ 350
Volatile content (%) ≤ 4
Tensile-share strength(Mpa) ≥ 1.5
Touch Dry time (min) 10~30
Curing speed (mm/24h) 3~5
Extrudability (g/min) 80
Pollution properties Non
Application temperature +5~+35
Shelf life(month) 9
Note:
All data above ware tested under standardized condition.
All data listed in the chart were for the generalized item in the series; Please refer to the related datasheet for special items.
Storage condition has a direct impact to the products' shelf life, Please refer to the instruction for special items' storing.
Renz 10 is commercial grade, one-part, non-sag, polyurethane sealant that cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, Renz-10 is manufactured in accordance with the ISO/TS 16949: 2002.
USES:
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
PACKAGING:
* 310ml cartridge, 20 PCS/carton
* 600ml/400ml sausage, 20 PCS/carton
|
Testing Items |
Performance |
|
Appearance |
Black |
|
Density (g/cm³) |
1.35±0.05 |
|
Sagging propertise(mm) |
0 |
|
Shore A-hardness( A ° ) |
6 1 ±3 |
|
Tensile strength( Mpa) |
≥4.0 |
|
Elongation at break (%) |
≥350 |
|
Volatile content (%) |
≤4 |
|
Tensile-share strength (Mpa) |
≥1.5 |
|
Touch Dry time (min) |
10 ~ 30 |
|
Curing speed (mm/24h) |
3 ~ 5 |
|
Extrudability (g/min) |
80 |
|
Pollution properties |
Non |
|
Application temperature () |
+5 ~ +35 |
|
Shelf life(month) |
9 |
