Anaerobic Retaining Compounds for Clearance Fit (SA4680)

Anaerobic Retaining Compounds for Clearance Fit (SA4680)

SA4680, is one-component, high strength, general purpose, medium viscosity, anaerobic retaining sealant for cylinder body hole/shaft fitting parts. It cures when confined between two close fitting metal surfaces in the absence of air.

Usage
Used for radial clearance is less than(<) 0.25 mm of clearance fit or excessive cooperate, best fit clearance of 0.05-0.05 mm. Can replace force fit, anti-corrosion.; Used for slight rotation (wear) bearings, bushings etc assembly, retaining pulleys, bushings, gears, rotors, repair hole--shaft fittingand ultra-poor parts.

Operation
1. For the better results, clean all the surfaces(external and internal) with our A6755 cleaning
And allow to dry and oil.
2. For slip fitted Assemblies, apply adhesive around the leading edge of the pin and the inside of the collar and use a rotating motion during assemble to ensure good coverage; For Press Fitted Assemblies, apply adhesive thoroughly to both bond surfaces and assemble at high press on rates; For shrink Fitted Assemblies, the adhesive should be coated onto the pin, the collar should then be heated to create sufficient clearance for free assembly.
3. Assembled parts should not be disturbed until sufficient handing strength is achieved

Package
50ml / Tube, 250ml / Tube

Storage
Keep in cool and dry location in unopen containers at 8-28º C
Shelf life: 24 months