Specifications
1.HDPE plastic raw material .
2.Virgin HDPE resin .
3.supply free sample.
4.best factory price .
5.SGS inspection accepted
Sinopec !!! High Density Polyethylene HDPE / virgin HDPE resin HDPE plastic raw material
1. Specification
HDPE cable material Property | Typical Value |
Mass density g/cm 3 | 0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg)g/10min | ≤1.0 |
Tensile yield strength MPa | ≥19.0 |
Flexural modulus Mpa | ≥965 |
Elongation@ break % | ≥400 |
Impact Embrittlement temperature centidegree | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 |
Volume resistivity OHM-CM | MIN 1x10 15 |
2,HDPE film grade
ITEM | Unite | Value | Test Method |
Melt Mass-Flow Rate (MFR, 2.16kg) | g/10 min | 0.04 | GB/T 3682 |
Melt Mass-Flow Rate (MFR, 5kg) | g/10 min | 0.28 | GB/T 3682 |
Density | g/cm3 | 0.955 | GB/T 1033 |
Tensile Strength at Yield | MPa | 24 | GB/T 1040 |
Elongation at Break | % | 450 | GB/T 1040 |
Fish-eye(0.8mm) | n/1520cm3 | 6 | GB/11116 |
Fish-eye(0.34mm) | n/1520cm3 | 35 | GB/11116 |
3,HDPE injection grade
ITEM | Unite | Value |
Melt Mass-Flow Rate (MFR, 2.16kg) | g/10 min | 8 |
Density | g/cm3 | 0.956 |
Tensile Strength at Yield | MPa | 25 |
Tensile strength at break | MPa | 10 |
Elongation at Break | % | 600 |
Charpy impact strength | kJ/m2 | Measured |
HDPE Raw Material,HDPE virgin granules
HDPE resins are produced with low pressure gas phase process. The products are primarily used for extrusion application such as flat Yarn, coarse monofilament, film & sheets and injection molding such as pallets, crates, bottle caps and industrial containers.
4. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
5. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport.And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together,and away from the fire.
.
.
As one of the specialized producers of industrial chemicals in HEBEI province, we have progressive production facilities and test instruments. Our refined pure industrial chemicals has occupied domestic and international markets of rubber, paint and dye industrial ares, which includes indiect zinc oxide, direct zinc oxide, nanometer active zine oxide, zinc stearate, calcium stearate, stearic acid, zinc carbonate basic, zinc phosphate, paraffin wax, antioxidant, etc.
Since our company has been built, we have sold about 20 kinds of products to more than 20 countries and regions including America, Europe, Australia and Africa. etc. Our progressive quality management and assurance system has obtained ISO9001 certificate. The firm has its own capacity of research, development, production and sales. Now it has built close partnership with customers from home and abroad. We shall constantly improve our product quality and the service standard to satisfy our customers demand.
And now, we have expand our products line to many products to service more customer!
Quality and Service is our policy!
