LCD Display Digital DC Voltage Data Logger 0~30V
Price: |
Negotiable/Piece |
Trade Terms: |
FOB,CFR,EXW |
Min Order: |
5/Piece |
Pay Type: |
L/C,T/T,Western Union,Paypal |
SSN-31 INTRODUCTIONThis data logger can measure and store DC Voltage readings automatically. The professional applications can be provided by the PC software DGraph. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging, or confirm and clear LED alarm when LED alarm is hold status.User can plug data logger straight into PC's USB port without any cables. Before getting started, user need to install USB driver and DGraph software, provided on the CD which is included in product packing box. All the software can run under Windows XP, Vista, 7 or 8(32 bit and 64 bit Versions). User can easily use DGraph software to setup sample rate, high/low alarm limit and start/stop method, and download data to PC, etc.. And then user can view, analyse and print the data, or export other file formats (txt, xsl, csv, bmp, jpg).Especially, for some professional applications, user can set access password, name each channel, enable/disable specified channel, input calibration data for each channel, disable LED indication for saving power, and select sample mode(Instant, Average, Maximum and Minimum), etc.. FEATURESPortable, precise, compact and low costEasy to log and analyse dataUnique and uniform PC software DGraph can meet your higher requirementsElaborate design makes it perfectly work in more application fieldStrict design ensure long term reliable workEnhanced electrostatic protection design to prevent unexpected damage Each unit have single serial number identified by DGraph software to manage data simplyAll data from different data logger and all different measurement parameters can be graphed and analysed togetherUSB interface directly communicate with PC for setup and data downloadUser can set access password for data loggerUser can name each channel and enable/disable specified channel freelyLED alarm enable/disable, LED alarm hold enable/ disable and alarm limit settings for all channels via DGraphTMUser can input formula to customize compound lineUser can create and customize new unit easily and freelyLogging status indication via red/green LED and battery status indication via yellow LEDStart logging method: Immediately, Button, DelayedUser can input two point calibration value for each channel when setupReplaceable lithium battery and logged data are not lost if battery exhausted SPECIFICATIONSDC Voltage Measurement range: 0 to 30V Accuracy(Typ.): ±1%±1count Resolution: 0.04V LCD: With a LCD display Memory Capacity: 64KBytes Sample Rate: 1sec. to 12hr. Start Method: Immediately, Start by button, and Start at date&timeStop Method: Stop when memory full, overwrite when memory full, stop by button and stop until specified number of sample points finishedSample Mode: Instant (default), average, maximum and minimum, This will decide how to dispose data at idle time between a sample intervalButton: Software config to start logging by button, or clear and reset LED alarm when LED alarm is holdLED: Red&green LED, Logger Status indication(Include Delay to Start, Logging, Alarm, Finished)(Software can disable this two LED for saving power)Yellow LED, Low battery indicationAlarm: User programmable high or low alarm limit for each channel(If necessary); LED alarm and holdCommunication: Direct USB connection; Need to install the driver provided on CDPC Software: DGraph software and USB driver required (Included on CD)(Compatible with Windows XP, Windows Vista, Windows 7&8(32 bit & 64bit Versions)) Power Supply: User replaceable 1/2AA 3.6V Lithium Battery 1200mAhBattery Life: Approx. 3 Years @ 1 Minute Sample RateInternal Input Impedance: R1+R2=1.1MΩ+91KΩOperating Range: 0 to 100%RH -35 to 80ºC(-31 to 176ºF)Storage Range Recommended: 20 to 60%RH 10 to 50ºC(50 to 122ºF)Case Material: ABSDimensions; 130mm×37mm×23mm(5.1"×1.5"×0.9")Weight: Approx. 69 grams(2.43oz)Standard Compliance: CE
Prod Model: |
SSN-31 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Measuring Range: |
DC 0~30V |
Accuracy(Typ.): |
1%+/-1count |
Resolution: |
0.04V |
Memory Capacity: |
64kbytes |
Sample Rate: |
1sec to 12h |
Power Supply: |
1/2AA 3.6V |
Dimensions: |
130mmx37mmx23mm |
Installation: |
Direct Connected |
Usage: |
Meter for Industry and Home Use |
Theory: |
Electronic Meter |
Power Source: |
DC |
Display: |
Reading Record |
YUWEN is a product designer and manufacturer located Shenzhen City of China. YUWEN will focus on bringing the top level and the most practical sensor and measurment technology to people. Also, We can provide ODM/OEM services for the customers who need some professional demands.
We bring various sensor technology into products, user will use these products without any complex concept. Our key advantage is high quality and meticulous pre-sale&after-sale service. If you intend to find an excellent product, we must be your best selections, and we will bring you more surprises.