Standard Toilet Seats, Heating Toilet Seat, Auto Sensor to Renew PE Film

standard toilet seats from Xiamen manufacturer, patent 5i life sanitary and intelligent toilet seat for hospitals, hotels, restaurants, airports, etc.

With a simple press or sensor, the built-in MCU will start the motor to turn the PE sleeve turning a new loop, so to provide a fresh and clean seat for every user, visible hygiene, no cross infection at all.

Advantages:
   A, Promote the cleanliness and neatness of toilets.
   B, Reduce cost on toilet paper, detergents and cleaners payrolls
   C, Easy installation within 3 minutes, widely adapt to 90% toilets.
   D, Used PE roll split, recyclable materials, Eco-friendly
 
1 Materials:

    1.1 ABS soft close cover
    1.2 PP comfortable seat ring 
    1.3 Durable Nylon & Stainless steel hinge 
    1.4 HDPE sleeve - 0.012mm thickness film  
    1.5 Stainless steel manual button
     1.6 Sensor ( Please sensoring at least 1 second within 5-7cm before the sensor)
 
2. Adapter
    2.1 UL listed Adapter 
           Input : 100-240Vac, 50/60Hz
           Rated Output: 24V
          
3. Technique 
     3.1 Static power consumption≤1.5w
     3.2 Dynamic power consumption≤15w
     3.3 Seat heating power consumption≤65w 
     3.4 Seat ring heating temperature: 32-36ºC (91.4 - 96.8F)
     3.5 Heating at ambient temp. below 18ºC

4. Characteristics:
    4.1 Patented 3 layers waterproof design
    4.2 Twinkling red means low voltage
    4.3 Over-load safety design
    4.4 6 seconds delay design to avoid abuse usage
    4.5 Adapted to 90% toilets --   (2 holes gap 13-21cm)
    4.6 Easy installation within 3 minutes

5. Package detail:
    Product weight: 3.5KG
    Product size: 50*45*15cm
        1pc /  box / 49*18*54.8cm
        5pcs / carton / 92.5*56.5*50cm
        N.W./G.W.:21/25kg

Some similar items listed below:

Item No.	IT1OOA	IT1OOB	IT2OOA	IT2OOB	IT2OOB-S	IT1OOC
Sensor	/	/	Yes	Yes	Yes	Yes
Battery	Yes	Yes	/	/	/	/
Seat heating	/	/	Yes	Yes	Yes	Yes
Adapter	Input : 100-240Vac, 50/60Hz Output: 7.5V	Input : 100-240Vac, 50/60Hz Output: 7.5V	Input : 100-240Vac, 50/60Hz Output: 24V	Input : 100-240Vac, 50/60Hz Output: 24V	Input : 100-240Vac, 50/60Hz Output: 24V	Input : 100-240Vac, 50/60Hz Output: 24V
Static power consumption	≤0.5w	≤0.5w	≤1.5w	≤1.5w	≤1.5w	≤1.5w
Dynamic power consumption	≤1.5w	≤1.5w	≤15w	≤15w	≤15w	≤15w
Heating power consumption	/	/	≤65w	≤65w	≤65w	≤65w

6. Installation steps:

6.1 Get the 2 holes of the toilet ready for installation.
 
6.2 13-21cm bracket adjustable to suit the most toilets, 
then tight the 2 sets of screws to firm the base on the toilet.
 
6.3 Horizontally forwarding the cover set till it clicked well on the base by leaning on the surface of toilet.
 
6.4 Get a PE roll, release the end of PE sleeve about 10-15cm and have it split about 5cm, insert the head of split PE sleeve under the "usage counter"
 
6.5 Putting through the PE sleeve along the seat ring.......
 
6.6 The split head of PE sleeve can easily go through the blade, and then fasten the head of sleeve to the plastic axle rack and make several circles, after that, please click the rack on the stand, switch on the motor after power on to check the performance of PE sleeve turning. So the installation finished.  

 
7. Application:
    For public toilets such as : Airports, Banks, Churches, Department stores &Shopping malls, Exhibition halls, Hotels, Restaurants, Coffee shops, Clubs, Beauty shops, Hospitals, Schools, Offices, etc.