Product Specifications
Prod Model: |
UWT |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Model No: |
Uwt |
Uwt: |
Building Sealing Material |
Material: |
Bitumen |
Thickness: |
1.0mm-4.0mm |
Width: |
50mm - 1000mm |
Length: |
1.0m-20.0m |
Tensile Strength: |
150-200n/50mm |
Elongation At Break: |
0.2mpa,120min No Water |
Anti-Hot Property: |
70'c,No Slide |
Type: |
Adhesive Tape |
Efficacy (',For Tape): |
Daily Use |
Surface Material: |
PE |
Backing Paper (',For Adhesive): |
Aluminum Foil |
Color: |
Bright Alu, PE Film |
Product Description
Specifications
1.self-adhesion without bonding agent,torching
2.good rubber elasticity,and elongation
3.good self-coalescence self-adhesive membrane are produced with SBS elastomer and bitumen as raw materials,
using polyethylene film.Aluminium foil coated on the upward or no file(both side self-adhesive) while self-adhesive protection layer on the downward surface.It has a widely prospect new
contruction waterproof materials. Good self-adhesion, no leaking,cold flexibility,especially in self-adhesion. That is unque product in waterproof and application.
Characteristics:
1). Self-adhesion without bonding agent, torching
2). Good rubber elasticity and elongation
3). Excellent adhensiion bond
4). Safe application, no pollution
5). Excellent waterproof and high strength
6). Corrosion resistance and ageing-resistance
7). Available for wet ground
\
No. |
|
|
1 |
PE |
AL |
N
|
2 |
Water impermeability
|
Pressure,MPa ≥ |
0.2 |
0.2 |
0.1
|
Retention time,min ≥ |
120,water impermeable |
3 |
Heat resistance°C |
----- |
80 No slippage, flowing, dropping. |
--
|
4 |
Tensile force N/50mm ≥ |
130 |
200 |
|
5 |
Elongation at break,% ≥ |
450 |
200 |
450
|
6 |
Softness |
-20°C,Φ20mm,3s,180°C. No crack. |
-- |
7 |
Shear performance
N/mm |
Between membranes ≥ |
2.0 or fracture on the external agglutination section |
fracture on the external agglutination section |
Between membrane and aluminum plate ≥ |
8 |
Peel strength,N/mm ≥ |
1.5 or fracture on the external agglutination section |
fracture on the external agglutination section |
9 |
Puncture resistance |
|
water impermeable |
10 |
Aging by artificial climate |
Appearance |
|
No crack, no bubble. |
--- |
Tensile force retention percentage,% |
|
80 |
--- |
Softness at low temperature,°C |
|
-10°C,Φ20mm,3s,180°C, No crack. |
--- |