Categories
Price: | US $ 6.26-12.95/Piece |
---|---|
Trade Terms: | FOB,CIF,DAP |
Min Order: | 500/Piece |
Pay Type: | T/T,Paypal,Western Union |
DC VOLTAGE | 12V | |
RATED CURRENT | 5.0A | |
CURRENT RANGE | 0 ~ 2.0A | |
RATED POWER | 60.0W | |
RIPPLE & NOISE (max.) | 120mVp-p | |
VOLTAGE ADJ. RANGE | 10.8~13.2V | |
VOLTAGE TOLERANCE | ±1.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±0.5% | |
SETUP, RISE TIME | 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load | |
HOLD UP TIME (TYP.) | 70ms/230VAC 12ms/115VAC at full load | |
INPUT | VOLTAGE RANGE | 85~264VAC 120~370VDC |
FREQUENCY RANGE | 47~63HZ | |
EFFICIENCY (Typ.) | 87% | |
AC CURRENT | 0.35A/115VAC 0.25A/230VAC | |
INRUSH CURRENT (max.) | COLD START 65A/230VAC | |
LEAKAGE CURRENT | Less than 2mA/240VAC | |
PROTECTION | OVER LOAD | Above 105% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 13.8 ~ 16.2V | |
Protection type : Shut off o/p voltage, clamping by zener diode | ||
OVER TEMPERATURE | U1 Tj 140°Ctypically (U1) detect on main control IC | |
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
ENVIRONMENT | WORKING TEMP. | -20~+70°C(Refer to "Derating Curve") |
WORKING HUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -40~+85°C10~95%RH | |
TEMP. COEFFICIENT | ±0.03%(0~50°C) | |
VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes | |
SAFETY&EMC | SAFETY STANDARDS | IEC 60950 approved |
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |
QTHERS | MTBF | 1608.8Khrs min. MIL-HDBK-217F (25°C) |
DIMENSION | 65.5*58*28mm (L*W*H) | |
PACKING | 0.28Kg; 58pcs | |
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°Cof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." |
Prod Model: | 12V5A |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Standby Power Consumption: | <0.5W |
Output Type: | Single |
Output Power: | 51 - 100W |
Input Voltage: | Full Range |
Voltage Regulating Mode: | Frequency Modulation Type |
Connection Mode: | Parallel Switching Power Supply |
Starting Mode: | Separate-excited Switching Power Supply |
Warranty: | 2 Years |
Power Supplying System: | Terminal Power Distribution Equipment |
Certification: | CE |