Product Specifications
Prod Model: |
OMY-J6-SA-1-2100 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Guarantee: |
3 Years |
Material For Faceplate: |
PC |
Material Of Metal: |
Phosphor Bronze (0, 6mm) |
Dimensions: |
86mm(L)*86mm(H)*36mm(D) |
Working Voltage: |
110V-250VAC |
Working Frequency: |
50/60Hz |
USB Output: |
5V/2100mA |
Type: |
With Switch |
Grounding: |
Standard Grounding |
IP Rating: |
IP22 |
Application: |
Residential/General-Purpose |
Product Description
1.1 --Mechanical Specifications
Material for faceplate | Inflame-retardant polycarbonate (94V0 PC) |
Material of metal | phosphor bronze (0,6mm) |
Interface material | Pure white, Champagne or customize |
Dimensions | 86mm(L)*86mm(H)*36mm(D) |
126mm(L)* 126mm(H)* 43mm(D) |
Weight | 170 g |
Heating cabinet at (100+-2 degree) for 1 hr | Pass |
Pollution degree | 2 |
Packing | Carton box |
Grounding | Standard Grounding |
Color | White or customized |
Application | Commercial, Industrial, Hospital, Residential/General Purpose of South Africa, Brazil, Europe, Swiss,India and Russia |
1.2 ---Electrical Specifications
Working voltage | 110V-250Vac |
Working Frequency | 50/60Hz |
Connection resistance between earthing terminal and accessible metal parts<0.05 Ohm | 0.006 Ohm |
IP classification | IP20 |
Rated current | 16A |
Rated voltage | 250V |
Operating ambient temperature | -10ºC~+40ºC |
Working humidity | <85% |
Storage temperature | -20C to +70C |
Insulation Resistance(500Vdc,1ms) | >5MOhm |
Storage humidity | <95% |
USB charging current (Maximum) | 1000mA,2100mA,2400mA for option |
USB charging voltage (Maximum) | 5V+/- 5% |
USB ports | 2 |
Power consumption | <30mW |
Output ripple & Noise | < 50mVp-p |
Compatible products | Smart phones, Tablet, FSP, digital camera and etc |
Charging efficiency | > 80% |
Range of application | All smart products (Include: I pod,I phone,I pad,smart mobile phone,Video camera,game machine, TABLET, PSP, digital camera etc) can be charged via the build-in USB power supply. |
Lifetime | 100,000 times |
2.3 --- Using Attention
1. Fresh battery shall be obtained good performance after 2 or 3 times charging, please don't use up the quantities of battery electricity, it must be recharged while the battery remain 10% to extend the battery life.
2. Low-grade heat generation of battery during charging process is normal phenomenon, the heat will turn to normal temperature after battery charging fully.
3. To get the optimal charging result, please don't place any appliances 30 cm around the USB wall socket outlet, to make sure the air flow in the room is expedite fully.
4. The USB wall socket's operating ambient temperature keep in -10ºC-40ºC.
2.4 --- Warning
1. The USB wall charger just limited to 5Vdc output battery charge via USB port, if any other type of battery charge or larger than 5Vdc smart products, the USB wall charger will lead to explode, battery burst up, battery weeping, physical injury or property torts.
2. Wrong using the charger will be in danger of electric shock.
3. The USB wall socket just apply to indoor use, no waterproof and use in high-temperature environment function, please avoid any rain/water inject in or use in high-temperature environment.
4. Please don't disassemble the USB power charger and assemble it without professional instruction, to avoid physical injury or property torts.
5. Please don't plug in any other metal into USB ports, to avoid USB charger circuit damage or explosion.
6. Children use the USB charger must be under adult monitoring or supervising.
7. Please don't use or store the USB wall charger under high temperature or high humidity.
8. Please ensure the battery polarity correct before plug in charge, or please don't use other kind of connector plug in USB ports to damage the USB ports.
2.5 --- Extensive knowledge
Basic Charger performance test:
1. Charging voltage load: Cut off current between 4.15 and 4.23Vdc 4.2Vdc
2. LED display RED, indicate in charging process; if the LED display Green, indicate the power charging is completed, over-charging detect charging has been termination.
3. Output short load regulations: Cut off current at 700mA/220Vac detect output voltage 4.2Vdc (set 1 ± 0.05V) during current conversion process.
4. Line regulation, 85~264Vac detect output 4.2Vdc (set 1 ± 0.05V) during AC voltage conversion process.
5. Over-current detection, charging voltage 2.5V add current, while charging voltage reduce to 2.5V, the current shall meet 450mA+,-50mA (27KΩ) and 750mA+,-50mA (4.7KΩ) and 900mA+,-50mA (1.5KΩ) requirement.
6. Output Ripple & Noise, AC 85 ~ 264V Cut off current 450mA and parallel a cap 47uF and 0.1uF to output, setup frequency to 20MHz and detect the max ripple <100mVp-p during current conversion process
7. Reverse current measurement, output 4.2V, AC power off to detect the current max 0.5mA flow to USB charger from mobile phone
8. Compensation charging start voltage, AC 220V the charger LED shall be always indicate Green, output shall be 4.07V ± 0.05V
9. Charging cut off current, AC 220V setup p/s to 4.15V, then detect the charging LED shall be exchanged between Red and Green during current conversion process, the charging shall be completed during30 ~ 100mA
10. AC power on/off 5 seconds, on/off 30,000 times (each 15,000 times at 85Vac and 264Vac) , charger shall be normal work.
The diagram of USB Charger for IPAD/IPOD/I phone:
Be different from other USB charge, the IPAD charger shall use up all the 4 wires (5V, Data +, Data -, GND), but other USB charger just use 5V and GND. (Please be noted below diagram for reference)
Our Company was established in 2003, seated in Dong Guan, Guang Dong, a well-known manufacturing city. OMY ELECTRONICS TECHNOLOGY Co., Ltd. is a specialized integrated enterprise and engaged in wall Switches and Sockets, Advanced Power Supply researching & developing, manufacturing, marketing and after-sales services. Our products include Wall Switches, Wall Sockets (Outlet), Wall Socket with USB Charger, Circuit Breakers, Portable Power Supply(Power Bank), Battery Chargers, DC/DC and AC/DC Converters etc. Widely used in house and commercial lighting, Automotive and communications electronics fields.
OMY company occupies a standard workshop of 5, 000 square meters, with over 300 employees. There is a research and development group of experienced, skilled and dynamic individuals and we maintain our own assembly production line, Tooling Center, Injection molding and metal processing section. We have an abundant technical strength and are well-equipped with modern machinery.
Keeping the management idea; "The products quality is the life of a company, coupled with never-ending innovation, in good faith and mutually beneficial decision making". Holding our core value of "You and me, win-win the future under our close cooperation", and our aim of "Timely response to customer needs, providing customer satisfaction with high-quality products". In order to serve our customers better, OMY has invested and achieved quality certifications of ISO9001, ISO14001, CCC, CE, UL, SGS, and apply the concept of (TQM) Total Quality Assurance going through the whole manufacturing process, incoming materials and outgoing goods inspection process.
At present, we rely on the high-quality products, well-deserved reputation, all-around technique service and competitive prices, OMY products have been exported abroad and we have established a stable relationship of good cooperation with overseas customers. Our products have been sold to North America, UK, Poland, Asia Pacific, the Middle East, Hong Kong, Taiwan and so on.
As always, we will keep taking customer focused, market-oriented, innovation and development constantly, providing our customer the high quality products while becoming more energy saving, environmental protecting, more convenient and satisfactory in every conceivable way. We will constantly be providing our esteemed customers with the most enthusiastically thoughtful service.