Product Specifications
| Prod Model: |
BGMJ, CPMK |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Type: |
Polypropylene Capacitor |
| Application: |
Power |
| Package Type: |
Surface Mount |
| Capacitance: |
1~60kvar |
Product Description
BSMJ Series Shunt Power Capacitor is mainly suitable for low voltage power network to improve power factor, reduce reactive loss and so on.
1. Small volume, light weight and convenient installation
2. Low loss, little radiation and low temperature rise
3. Excellent self-healing performance
4. Safety
5. No oil leakage, no-toxic and environment protection
Product Description
Low voltage power capacitor supply the solution for improving power factor, improve electric net energy
Factory power system
Residential area distribution system
Municipal commercial building
Transportation tunnel distribution system
Power capacitor bank, outdoor distribution box
Technical data:
1. Service conditions: Ambient temperature -25°C-50°C, humidity<=85%, and altitude lower than 2000m.
2. Rated voltage: 230VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC, 1200VAC
3. Rated output: 1-60 kvar
4. Rated frequency: 50Hz or 60Hz
5. Capacitance Tolerance: -5% - +10%
6. Tangent of the loss angle: With the power frequency rated voltage,
7. Withstand voltage: Between terminal 2.15 times rated voltage for 5 seconds, between terminals and container 2 Un+2Kv or 3KVAC choose the higher one for 10 seconds.
8. Max permissible over-voltage: 110% rated voltage
9. Max permissible over-current: 130% rated current
10. Self-discharge feature: It is less than 50V in 3min after power broke down when the DC is 2 Un as the before increased by the capacitors.
11. Applicable standard: GB/T 12747-2004, IEC60831-2002
High quality Power capacitor Installation Notice
1When install the capacitor, the capacitor wiring the best use of each individual cord is connected with the bus, do not use hard- bus connections to prevent damage to the assembly stress caused by the capacitor casing, seal damage caused by oil spills.
2. The capacitor circuit of any poor contact, may cause high-frequency oscillation arc work of the capacitor increases and the heat and the electric field strength early damage. Therefore, the installation must remain part of the electrical circuit and the ground contact.
3. Lower voltage level by a capacitor in series run at a higher voltage level network, each stage of its shell on the ground, should be run through the installation of the equivalent voltage level insulators and other measures to enable a reliable insulation.
4. Star connected via capacitors for a rated voltage high, and the Department ungrounded, the capacitor casing respond to insulation.
5. Capacitors before installing a battery capacity to be allocated to white balance, deviation does not exceed 5% of the total capacity. When equipped with protection devices should also meet the runtime error does not exceed the current balance relay operating current requirements.
6. Pairs of individual compensation capacitor wiring should be: Start or by direct induction motor starting rheostat, which improve the power factor of the capacitor and the motor can be directly connected to the terminal outlet, installed between the switching device or fuse not; On a star - delta starter start induction motor, the best use of three -phase capacitors, each capacitor is directly connected in parallel per phase winding two terminals of the capacitor winding wiring always wears the same access.
7. Pairs grouping compensation voltage capacitor should be connected at low voltage outside of the packet bus power switch to prevent packet bus switch off the self- excitation phenomena generated.
8 Focus group of low-voltage capacitor compensation should a dedicated switch and the main switch mounted on the outside of the line, but do not install at low bus.
Specification details:
Contact us:
Gaia Electrical Co., Ltd
ADD: Xinguang Industrial Zone, Liushi, Yueqing, Wenzhou, Zhejiang, China
Atten.: Kelly G.
Tel: +86 13968710573
Web: www.gaiaele.com
Wenzhou Gaia Electrical Co., Ltd. is a manufacturer and exporter which mainly produces electronic meter, current transformer, low and high voltage shunt power capacitors, intelligent reactive compensation controllers, AC contactors for switching shunt capacitor / capacitor contactors, reactors, high and low voltage reactive compensation devices, and harmonic solving devices. Our company integrates research, production, trade and service as a whole.
Our company is located in Liushi town of Yueqing city. Our products are sold to many countries and regions, such as Middle Asia, Russian federation countries, Southeast Asia, South America, Korea, Japan, Africa, Turkey, Pakistan and so on, gaining the trust of our customers.
Our company has been persisting in taking "offer the most perfect solution for power network compensation" as our theory. We constantly use new technologies to develop new products, which wins the approval and trust from the mass of users.
Gaia Electrical thank the friends from all social walks for your support and reliance, we'll persist on inheriting the enterprise culture, cultivating scientific and technological talents, fulfilling social responsibility. All the staff of our company are expecting to go with you hand in hand, and cooperate win-win, hope we go together for a "professional, safe, reliable" long life greatness. Thanks a lot.
Contact us:
Wenzhou Gaia Electrical Co., Ltd
ADD: Xinguang Industrial Zone, Liushi, Yueqing, Wenzhou, Zhejiang, China
Tel: +86 13968710573
