BS12u Piezoresistive Pressure Sensor
Price: |
Negotiable/Piece |
Trade Terms: |
FOB,CIF,DAP |
Min Order: |
2/Piece |
Pay Type: |
T/T,Western Union |
BS12 Piezoresistive OEM Pressure Sensor Feature> Pressure range (-0.1~60)Mpa;> Pressure reference: Gauge, absolute and sealed gauge;> Constant current power supply;> Isolated construction to measure various media> OEM pressure element> 316L stainless steel material> Perfect long term stability> Different male thread connection optionalApplication·Industrial process control ·level measurement ·Gas, liquid pressure measurement ·Pressure meter ·Pressure calibrator ·Liquid pressure system & switch·Refrigeration equipment &air conditioner ·Aviation and navigation inspectionIntroductionBS12 series piezoresistive pressure transducers adopt high-sensitivity piezoresistive silicon chip inside for pressure sensing. The chip is protected against ambient influences by a stainless steel housingsealed with a concerntrically corrugated diaphragm. The housing isfilled with silicone oil for the transfer of the pressure from the diaphragm to the sensing component. Exchanging the pressure into mV electrical output signal. The transducers are designed for floating O-ring seal mounting for avoiding housing induced stress,this also can guarantees the performance over pressure. All metal parts in contact with the pressure media are made of stainless steel 316L. They are delivered with engraved serial number. Once any problem happens on any transducer, all testing records during the whole process from the raw material to the finished products are ready for tracing. Universal BS12U Piezoresistive Pressure TransducersThe universal BS12U Piezoresistive pressure transducer is the standard type (Diameter 19mm) in BS12 series. Strongly interchangeable outline dimension, Short leading time, Widely be used in world-wide variety of different applications. BS12-13 Piezoresistive Pressure TransducersComparing with the universal BS12U series pressure transducers, BS12-13 is designed for smaller space installation/compact size (Diameter 13mm). Assembled BS12N Piezoresistive Pressure TransducersPut general BS12U pressure transducers into the housing with standard or special thread; use O-ring or combined washer to seal; with flexible construction and strict inspecting and screening; the assembled BS12N transducers has similar application with general type transducers, it can be used for mounting and production of different pressure instruments.Basic Specification |
Item | Min. | Typ. | Max. | Units |
Linearity |
| ±0.15 | ±0.25 | %FS,BFSL |
Repeatability |
| ±0.1 |
| %FS |
Hysteresis |
| ±0.05 | ±0.1 | %FS |
Zero output |
| ±2 |
| mVDC |
FS output | 60 |
|
| mVDC |
Zero thermal error |
| ±0.02 |
| %FS/ºC |
≤70Kpa Zero thermal error |
| ±0.03 |
| %FS/ºC |
FS thermal error |
| ±0.03 |
| %FS/ºC |
≤70Kpa FS thermal error |
| ±0.05 |
| %FS/ºC |
Compensated temp. range | -10~70 | ºC |
≤70Kpa Compensated temp. range | 0~70 | ºC |
Storage temp. range | -20~65 | ºC |
Stability |
| ±0.2 | ±0.3 | %FS/year |
*testing at basic condition,G: Gauge; A: Absolute; S: Sealed gauge |
Electric Performance |
Power supply | 1.5mA(typ.) |
Electric connection | Kovar pin or 100mm silicon rubber flexible wires |
Common mode voltage output | 50% of input (typ.) |
Input impedance | 2kΩ~6kΩ |
Output impedance | 2kΩ~6kΩ |
Insulation resistor | 250MΩ, 250VDC |
Overpressure | <6MPa, 2 times FS; (6~60)MPa, 1.5times FS; Differential pressure or Low pressure range 1.3times FS |
Construction |
|
Diaphragm | stainless steel 316L |
Housing | stainless steel 316L |
Pin | Kovar |
O-ring | Viton |
Net weight | ~30g(general type) |
| ~50g(flush diaphragm) |
| ~150g(assembled type) |
|
|
Basic Condition |
Media temperature | (25±1)ºC |
Environment temperature | (25±1)ºC |
Shock | 0.1g (1m/s/s) Max |
|
Humidity | (50%±10%)RH |
Local air pressure | (86~106)kPa |
Power supply | (1.5±0.0015)mADC |
|
|
|
Order GuideBS12 | OEM Piezoresistive Pressure transducers |
| Code | Type |
U | Universal BS12U Piezoresistive Pressure Transducers |
13 | BS12-13 Piezoresistive Pressure Transducers |
N | Assembled BS12N Piezoresistive Pressure Transducers |
| 19 | Diameter: 19mm |
| Code | Pressure range | Reference pressure |
Gauge(G) | Absolute (A) | Sealed gauge (SG) |
0.017 | 17kpa | √ |
|
|
0.035 | 35kPa | √ |
|
|
0.07 | 70kPa | √ |
|
|
0.1 | 100kPa | √ | √ |
|
0.2 | 200kPa | √ | √ |
|
0.35 | 350kPa | √ | √ |
|
0.7 | 700kPa | √ | √ |
|
1.4 | 1.4MPa | √ | √ | √ |
2.1 | 2.1Mpa | √ | √ | √ |
3.5 | 3.5MPa |
| √ | √ |
7 | 7MPa |
| √ | √ |
17 | 17MPa |
| √ | √ |
35 | 35MPa |
| √ | √ |
60 | 60MPa |
| √ | √ |
|
|
|
|
| Code | Excitation |
C | 1.5mA |
V | 5V(typ.) , others (please specify) |
| Code | Temperature compensated type |
N | no compensation |
R | compensated by resistors |
| Code | Electric connection |
1 | kovar |
2 | silicon rubber flexible wires |
BS12 | U | 19 | 3.5 | 35Mpa | C | N | 1 |
|
|
|
|
|
|
|
|
|
|
|
Order Note1. It is recommended that the transducers should be installed as Suspended Mode to avoid face tight press and avoid affecting transducers stability. 2. Please pay attention to protect the diaphragm to prevent any damage or bad performance. 3. If the working temperature of Viton rubber exceeds the temperature of the rubber specification or be applied in critical environment, please contact us. 4. The material of measuring medium should be compatible with the stainless steel. If it is corrosive, pls specify its material in detail. 5. Please note in the order if you need zero pressure as negative pressure. 6. All specifications are subject to change. Contact us for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only.
Prod Model: |
BS12U |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Pressure Range: |
-1bar~60bar |
Pressure Reference: |
Gauge, Absolute and Sealed Gauge |
Over Pressure: |
200%Fs(<6MPa), 150%Fs(>6MPa) |
Output: |
Analog Sensor |
Usage: |
Pressure Sensitive Sensor |
Theory: |
Piezoresistive Silicon Chip Employed |
Power Supply: |
1.5mA ; 5VDC |
Measuring Medium: |
Vapor, Gas, Liquid Compatible with Stainless Steel |
Certification: |
CE, RoHS, ISO9001 |
Nanjing Gaohua Technology Co., Ltd is located in Nanjing, Jiangsu Province, China and built in 2000, which is an ISO9001: 2008, CE and RoHS qualified OEM SENSOR-manufacturer and professional exporter (exporting to more than 20 countries). Our present workshop covers about 4000 square meters, meanwhile we have our own advanced sensor-developing center, production center, purification center, testing center and metal processing center.
We have own patents of key technology and concentrates on pressure sensors R&D, producing variety of sensors/ transducers/ transmitters (such as pressure, temperature, humidity, Acceleration, Angle, Position, Level etc. ).
With reliable quality and reasonable price, our products are widely used in the process measurement &control of Engineering machinery/ Automotive/ Medical/ Rail transit/ Mine/ Ship/ Internet industry etc.
For important projects which refer to various sensors, we offer one-stop service including customized sensors, standard production and agent procurement.
We looking forward to coorperate with you!