Product Name
CE Electric Industry Hand Tool Heavy Duty Fabric Scissors Power Tools
What is a Hot Knife?
The Hot Knife is a professional-grade hot cutting tool for foamed plastics. The Hot Knife heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess.
A hot knife is normally a hand-held tool with a handle and heated blade. Most hot knives are
Designed for cutting EPS foam (Styrofoam), or a similar type of insulating foam.
What can it do?
The foam cutter/grooving cutter is fpr cutting different density foam, with fine cutting edge, no mess.
Cutting with the groover-sled, it is easy to make different groove shape on the foam.
Cut the rope and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cut thre synthetic fiber cloth without backup under the cloth, seal the cutting edge as well; Cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth.
Packaging & Shipping
Our Services
Preparation
1. Select a hot knife blade corresponding to the cutting use.
2. Loosen the knurled nut when device is cold.
3. Insert each leg of the blade and tighten the knurled nuts. Make sure that the blade and the cutting head have optimal contact. If both legs of the blade are not properly installed, the unit will not heat up.
Cutting
1. Actuate switch, the indicator light and the blade will heat up.
2. Avoid direct short circuit between cutting heads.
3. Do not use metallic rulers for guiding the blade.
4. Clean cutting heads with enclosed wire brush.
5. Please make sure the blade is connected to the cutting material before blade heats up.
Caution
1. Always operate the Hot Knife in well ventilated space.
2. Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped.
3. Only operate Hot Knife when it is in contact with the insulation board
4. Keep hot blades away from skin, clothing and other flammable materials.
5. Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces.
6. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.
Hot Knife
No. | Voltage
(V) | Power
(W) | Handle | Blade No. | Blade Specification | Blade
Effective Length | Application Range |
| RTH81051 | 220 | 100 | Round | P1500005 | Arc welding blade
T=0.8mm | 3mm | Cloth |
|
|
|
| P1500027 | L=2 '
T=0.8mm | 50mm | EVA,EPS,foam |
| RTH82051 | 220 | 150 | Round | P1500028 | L=4 '
T=0.8mm | 100mm | EVA,EPS,foam |
|
|
|
| P1500029 | L=6 '
T=1mm | 150mm | EVA,EPS,foam |
| RTH85051 | 220 | 200 | Round | P1500040 | L=6 '
T=0.8mm | 150mm | EVA,EPS,foam |
|
|
|
| P1500030 | L=8 '
T=1mm | 200mm | EVA,EPS,foam |
| RTH84051 | 220 | 250 | Round | P1500031 | L=10 '
T=1mm | 250mm | EVA,EPS,foam |
| RTH60050 | 220 | 60 | Square | P1500033 | Special-shaped Blade
T=0.8mm | N/A | Rmove the dirt
on the glass and ground |
|
|
|
| P1500034 | Special-shaped Blade
T=0.8mm | N/A | Plastic burring,sharp edges
Leather paddle |
|
|
|
| P1500036 | Special-shaped Blade
T=0.8mm | N/A | Plastic burring,sharp edges
Leather paddle |
|
|
|
| P1500038 | Special-shaped Blade
T=0.8mm | N/A | Cable
within diameter 1 mm |
Back in 2006, James Lu created this company. This company is specialized in producing hot knives, heat cutters etc. With over seven years' Experience in exporting hot knives, we have become a professional manufacturer, development and production of Industrial productions (hot knives, cutting machine, heat cutter, thermocutter etc).
Located in Suzhou, we have convenient transportation access to every corner of the world. By building up the platform of international export trade and national distributors and related areas to gain profits, it aims to become the dominant professional integrated supplier of textile machiines and cutting tools in east China.
We are currently exporting 90% of our production worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. Each manufacturing process has undergone strict operating procedures and regulations. The series products are widely used in the following different areas. The series products are widely used in the following different areas, as hot knives, heat cutters, thermocutters for well.
We hope to provide the most stable sourcing channel between us and overseas customers. We want to be who you turn to for all of your outsourcing needs. Our mission is to provide you with outstanding service, excellent products, and it' S also important to reduce your costs. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with our clients around the world in the near future.
