Chinese Herb Vacuum Drying Machine
Description:
Herb Vacuum Drying Machine is widely used in pharmaceutical, chemical, foodstuff and electronic industry, and it is well known that vacuum drying is put raw material into the environment of vacuum for heating and drying, if use vacuum pump to draw air and humidity out, the dry speed will be faster.
Work Principle:
It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster.
Note: If use condensator, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.
Product Characteristics:
1. Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency increase. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
2. The heat source for evaporation may be low pressure steam or surplus heat steam.
3. The heat loss is less.
4. Before drying, the treatment of disinfection may be carried out during the period of drying, there is no impurity material mixed. It is in conformity.
5. It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
Application:
It is suitable for low temperature drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
FAQ:
1. Before you inquiry, you should let us know the following information:
A. >Name of the material to be dried?
B. > Shape of the material to be dried?
C. > Initial moister of material?
D. > Final moister of material?
E. > Drying materials can withstand the maximum temperature?
F. > Capacity of dried material? Kg/h (or capacity of inlet wet material? Kg/h)
G. > Equipment material, stainless steel or carbon steel?
H. > Using heating source, steam / electricity / coal / heat conduction oil or other?
2. Our usual price is based on FOB Shanghai, if you request CIF, please give us the delivery port, then we will give you CIF price.
3. Our usual payment term is: 30% TT in advance, 70%TT before shipment.
Technical Parameter:
Specification
| Model No.
|
YZG-600 Φ×L
| YZG-1000 Φ×L
| YZG-1400 Φ×L
| FZG -15 L ×W×H
|
Inside size of chamber (mm)
| 600×976
| 1000×1527
| 1400×2054
| 1500×1400×1200
|
Outer size of chamber (mm)
| 1153×810×1020
| 1693×1190×1500
| 2386×1657×1920
| 1513×1924×2060
|
Layers of baking shelf
| 4
| 6
| 8
| 8
|
Layer of baking shelf (mm)
| 81
| 102
| 102
| 122
|
Size of baking shelf (mm)
| 310×600×45
| 460×640×45
| 460×640×45
| 460×640×45
|
Number of baking disk
| 4
| 12
| 32
| 32
|
permitted pressure inside the pipe of baking shelf(Mpa)
| ≤ 0.784(8kg/cm 2 )
| ≤0.784
| ≤0.784
| ≤0.784
|
Temperature inside chamber( ºC)
| ≤150
| ≤150
| ≤150
| ≤150
|
Vacuum in idle inside chamber
| ≤30
|
when vacuum is 30 torr and the heating temperature is 110 ºC
,vaporized rate of water(kg/m2.h)
| 7.2
|
If use condensator,type and power of vacuum pump(kw)
| 2X -15A 2kW
| W3 5.5kW
| W3 7.5kW
| 2X -70A 7.5kW
|
If not use condensator,type and power of vacuum pump(kw)
| SK-0.8 2.2kW
| SK-3 5.5kW
| SK-3 7.5kW
| SK-3 7.5kW
|
Weight of drying chamber(kg)
| 250
| 800
| 1000
| 2100 |
Changzhou Hengcheng First Drying Equipment Co., Ltd. Specializes in producing drying equipment. Our factory covers an area of 20, 000 square meters, including 8, 000 square meters of building area. We have over 10 million RMB of fixed assets and hold over 100 sets of special processing equipment. We can produce 600 sets of equipment for drying, granulating and mixing annually. Our products have 20 kinds with 100 specifications and varieties, which are widely used in pharmaceutical, chemical, foodstuff, zymin, building materials, electron, feed industry, as well as the production of agricultural and sideline. Our factory has special advantages in design for customers.
Our products sell well all over the country and are also exported to the USA, Korea and Southeast Asia. Our factory has assembled and trained a team with rich experience in production and technical service, and has cooperated with relevant universities and colleges in technology for a long time. We are also improving, upgrading and developing products constantly, to ensure advanced, high-quality products and good service available to our customers.
Our goal is to build world first-class drying equipment, and we will try our best to do everything for our customer's satisfaction.
We welcome you to visit our factory!
