Main Technical Data:
Processable dimensions (h x l): Min. 280 x 540 mm
Ways of Assembly: Automatically in the Press Plate.
Working Direction: Facing equipment, from right to left
Paint: Blue or to order
External Dimensions: 2890mm
Power: 23.21KW
Washing Speed: 2-10m/min
Max. Work Speed: 45m/min(basis demand, but also may enhance)
Single glass Thickness: 3-12 mm
Insulating Glass Thickness: ≤ 40 mm
Working Height: 580mm
No sealant output: 500pieces/8 hour (1 meter long normal type glass lites)
Input voltage: Made to order
Compressed Air supply: 0.5-1.0Mpa, 1.2m3/min,
Water supply: Circular Water: 0.5t/day Conductance≤ 40μS
Ambient temperature: Min. 10º C, max. º C, following DIN 40040
Relative air humidity: Max. 75 % rel. Following DIN 40040
Gross weight: Approximately 5500 kg
Main Function Introduction:
1 The entire machine's operation is controlled by PLC: And operates direct-viewing and convenient, the frequency conversion velocity modulation, the maximum speed may amount to 32 meters/Minute.
2. LOW_E glass automatic diagnosis system: The line can insure that the membrane of (especially the LOW_E glass) coating glass will not be destroyed, the washing section adopts special safeguard, the 3 pairs of brushes adopt rmostable and soft nature hair brush completely, the glass transportation section is loaded with the coating glass automatic diagnosis system, fully guaranteed the correct clean of the coating glass and the Slice Joint.
3 3 pairs of brush and double-way washing: This line has 3 pairs of brushes and three levels of cleans, guarantee the best clean effect. The clean section uses the high quality stainless steel completely, the part which may contact with water uses the stainless steel or the copper nature material. The water tank is intalled with the permanent lukewarm water heater and install thickly and fine filters system.
4 Conserves energy interrupted type automatic operation system: Entire machine uses the energy conservation interrupted type automatic operation system, when glass movement to the electro_optical sensor of the end of the input section, the brush, the water pump, the air blower will be start automatically, so the economical energy conservation can be keeped.
5. Exact positioning and no displacement: In the press station, there is imported highly effective vacuum generator, can make the vacuum negative pressure maintains above 0.8 megabar, according to the glass size can automatically control the sucker suction, full guarantee the glass lites does not glide down.
6. Pressing with high precision: Adopts hydrsulic drive and a straight line guide rail, can fully guaranteed the high accuracy parallel press. Besides, it has the function of adjusting the pressure can automatically adjust the pressure according to the insulating glass lites size, can obtain the best press effect for all the different glass size.
Demac Engineering Co., Limited Is an Chinese company operating with great success for many years manufacturing a large range of machinery for the aluminium sector, this high quality products are work for windows and doors (curtain wall), and also for any kind of industry that works with aluminium as well as the insulated glass processing machine.
Demac is located in Jinan, a booming and beautiful capital city of Shandong province.
The company during the years made many changes, introducing new equipment and technology innovation for the production, and enlarging always more and more the premises.
Nowadays Demac employs more excellent and elite people of this industry working in the production division, technical department, sales and administration offices.
After an established leadership on the China national territory, progressively Demac enlarge its business on the international market too, such as Asia and American market,
Demac increased the sales. Thanks to: The service offered to the customers, customization of products, and the maintenance granted from technical department always at work.
Demac was established by several expert and authorities of the industry and thanks to them that decide to invest to high technology, allowed to DEGA to be one of the leading company in the market.
Quality products, cutting-edge technology, flexibility and practical aspect, are on the basis of the Demac machinery.
DEMAC offers numerous products all characterized by friendly-use combined to high technological level.
The wide range of products and services keep the customers satisfied and close to DEMAC.
The principle that guides every aspect of production and of company management. DEGA is a certified company, operating a total quality system that is applied across the board on an everyday basis:
Inwards, in the selection of materials and suppliers.
In process, by way of stringent control systems and precision workmanship.
Outwards, offering short delivery dates and an excellent quality/price ratio.
Thanks to the wide range of machines DEMAC is able to satisfy any kind of customer, from the big industry to the small windows and doors manufacturer, offering the possibility to purchase as turnkey.
For small company: (cutting machine, drilling machine, copyrouter, end-milling machines)
For medium company: (double mitre saw, cutting machine, copyrouter, end-milling machines, crimping machine)
For big company: (CNC machining center, double mitre saw, cutting machine, copy router, end-milling machines, crimping machine, assembling equipment)
DEMAC manufacture cutting-edge machinery that grant long time productivity, reducing the working time and at the same time offer an excellent quality/price ratio.
DEMAC develops new and fast solution for the demand of the market.
