BEFORE INSTALLING
NOTICE: This manual should be left with the owner/user of this equipment.
GENERAL DESCRIPTION
The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by pressing its breakable glass. The manual call point can be test by a test key without breaking the glass.
Operation
The mannual push button provide textured finger-hold area that includes braille text. In addtion to push in and pull down text there are arrows indicating how to oprate the station, provide for non english speaking people
Pushing in and then pulling down on the handle activates the normally open alarm switch. Ocnce latched in the down position the word activated appears at the top in bright yellow with a portion of the handle proturding at the bottom as a visible flag.
Resetting the station is simple: Insert the key, twist one quarter-turn then open the station's front cover. Causing the spring-loaded operation handle to return to its orginal position. The alarmn switch can then be reset to its normal position manually or by closing the station's front cover. Which automatically reset the switch.
Loop Design and Wiring
The fire alarm control panel Zone wire can be connected to terminal 2(+), 4(-).
And there is a 5.1V Zener diode should be connected to terminal 1A and 4A. (included by default).
If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal 2, 4.
Shenzhen Asenware Test And Control Technology Co., Ltd, a leading Chinese fire alarm panel & relevant fire detector manufacturer (a technology oriented company).
We have 3 series fire alarm control systems with time-tested performance:
1.2166 Series: Conventional fire alarm system with optional 1-32 zone panels.
2.2188 Series: Addressable fire alarm system for middle fire project with optional 100/200/324 addresses.
3.2100 Series: Addressable fire alarm control system for big fire project with minimum addresses starting from 648, 648*2, 648*N.
A professional and experienced R&D team will offer all-around technical support before, during and after sales, they can also provide professional technical solutions for your items, even arrive in customer's country to direct projects personally. Our aim is to provide our customers with all-weather and all-around satisfying service.
|
operating voltage |
9-28vdc volts |
|
alarm current |
45ma@24VDC |
|
operating humidity range |
10%-93% |
|
weight |
220g |
|
d imension |
140mm*105mm*45mm |
Asenware sets up in 2006, the predecessor is Shenzhen Widesense Technology Co., Ltd. Now Asenware is an international group company.
We are a technology-oriented company that devotes to NDT (Non Destructive Test) and BMS (Building Management System) industries.
We have two factories: One factory is in Shenzhen city for BMS products, and another is in Dandong city for NDT X-ray products.
In our BMS factory, we produce addressable and conventional fire alarm system, CCTV camera and DDC controller.
In our NDT X-ray factory, we produce portable and mobile NDT X-ray flaw detectors, X-ray analysis equipment and the dark room accessories.
We have an experienced R&D team to design special electrical product for test and control usage.
We have been striving to provide customers with satisfying service before, during and after sales.
