Product Specifications
| Prod Model: |
BD65 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Item: |
Crusher Liner Plate Anti Wear Backing Adhesives |
| Viscosity: |
a : 40000, B : 250±50MPa.S |
| Density: |
a Component: 1.6, B Component: 1.01g/cm3 |
| Operation Temperature: |
5 to 30 Degree |
| Bonding Function: |
High Temperature Resistant Adhesive |
| Morphology: |
Solvent |
| Material: |
Epoxy |
| Classification: |
Room Curing |
| Main Agent Composition: |
Natural Polymer |
| Characteristic: |
Weatherability |
| Promoter Composition: |
Curing Agent |
| Composition: |
Organic Material |
| Color: |
Yellow |
| Application: |
Crusher Liner Plate Protective Special |
Product Description
Packing specification of BD65 crusher special abrasion resistant filling adhesives:
20Kg/group,packed in a iron drum, 10kg/group,packed in a plastic drum
performance features of BD65 crusher lining plate special backing adhesive:
Before curing:with good fluidity and strong filling ability,easy to operate,safety and environmental protection
After curing:with low shrinking percentage and good adhesion,bearing capacity is high,can tear down
BD65 crusher liner plate anti wear filling material product usage:
BD65 backing adhesives(crusher lining plate filling adhesive) is used in the filling/supporting between crusher lining plate and substrates,gravel barrels and jacket gap,support cone and protective layer space,at the same time it can be used as buffer material,when the equipment suffers impacting or load vibration from broken ore, also used in the structural reinforcement,impact resistant vibration of ball mill wear resistant lining plate and cylinder gap.
BD65 crusher special anti wear filling material performance index:
Modified epoxy material,two component,gray fluid
Color: A component: gray, B component: brown
Viscosity: A component: 40000, B component: 250±50mPa.s(GB/T2791-1995)
Density:A component: 1.6, B component: 1.01g/cm3 (GB/T13354-1992)
Compressive strength after curing:120 Mpa (GB/T2791-1995)
Shear strength after curing:12.3 Mpa (GB/T7124-1996)
Hardness after curing:Shore D85 (GB/T2144-1980)
Shrinkage ratio after curing: 0.01%
Cooperation ratio(A : B),weight ratio 8:1,volume ratio 5:1
Pot life:15 min,the shortest curing time before operation:12h
Operation temperature:5ºC-30ºC
The temperature resistant after curing:-50ºC-170 ºC
BD65 crusher liner plate protective backing adhesives use technology:
1 Cleaning up and preparation: Clean up the residual filling material of the cone surface,or greasy dirt and dirt from the parts where touch with adhesive.Fit up the cone and lining plate,seal up the cone/lining plate fitting surface and ring hole with adhesive tape etc,to avoid leaking adhesive,in necessity,protect the screw thread on the axis,construction is in the temperature of 5ºC-30ºC as far as possible during using.General construction in winter,you had better heat the A component up to the temperature of 25ºC-35ºC separately to reduce viscosity for easy to pour.For ease of disassembly next time,the cone and lining plate surface can precoat proper engine oil or mold release agent.
2 Configure adhesive: Make the blender fix on low speed electric hand drill,Open the A component of BD65,stir it for 1 minute,then pour the B component into the A component drum at the same time stir it with the electric blender,it's OK for color uniform,general stirring time is not more than 4 minutes.
Operation time:The total time from start mixing to finish filling is not more than 15 minutes(the data for 20ºC)
3 Pouring: Make the mixed-up BD65 adhesive solution pour into it along the cone or a place of lining plate crack,easy to exhaust,in necessity,can make a cofferdam guide with plasticine etc,until overflow from the top of crack.Don't pour into the adhesive without mixing uniformly(with different colors)
4 Curing: Place to cure for 12-24 hours,the temperature makes a big difference for the curing time,the curing speed is fast for high temperature,it can put into using to cure for 12 hours in summer,and cure for 24 hours in winter.
storage:
BD66 crusher filling material is the general chemicals,should pay attention to waterproof and preventing fire in the process of transportation and storage,stored in a cool and dry place,the storage period is 12 months.
Xiangyang City Hundred Shield Coating Material Co., Ltd. Is a professional manufacturer and exporter of protective coating material based on customers' OEM requirements. We regard customers' special demand as our guide, professional R&D various protective coating material that suitable for the special working condition. We're the industry leading level in terms of modified epoxy material and polyurethane material function expansion.
You choose us based on our 50 workers, 18 years professional coating material R&D experience, 1600 non-dust workshop, fast sample delivery(within 3-5 days after confirmation) and several patent products of wear resistant ceramic adhesive.
Our main products including: Wear resistant coating, corrosion resistant coating, backing adhesive, ceramic adhesive etc various protective coating material.
Cooperation mode:
1. Take direct supply as the main for business cooperation, meanwhile carry out wholesales, subpackage, OEM etc. For outside sales
2. Directional R&D required products based on customers' special demand for technical cooperation.
Our company regards Strives for the survival by the quality, seek development by innovation as our operation principle, insist on the principle of "customer first", provide excellent service for our wide customers.
