Product Specifications
Prod Model: |
YHE-24 |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Mechanical Principle: |
Vacuum |
Product Description
Specifications
1. Used black motor oil suit
2. High recycle rate
3. High performance, and environment.
4With low noise oil pump, off gas system
1. Technological Instruction:
Adopting ways of transportation by tins or buckets, the waste mineral oil are unloaded into
Filtering ponds directly. After the process of sedimentation and filter, pumped the waste oil into
Oil-water separator, then discharge the waste water and pump the isolated oil to tank separately.
Through secondary filter, heat the oil up to certain temperature, feed it continuously flow to vacuum
Film evaporator, further desorbs the water in the waste mineral oil to isolate the clean oil and heavy oil.
Then start the secondary filtration in molecular distillers to distillate the lubricating oil with Siemens, PLC and color touch screen to control the whole process.
After cooling in condensator and stand still in buffer tank, pump the end product into tank.
2. Technological Parameter:
A. Process many kinds of waste oil such as waste hydraulic oil, used oil, diesel oil and waste
Gasoline etc
B. Distillation under high vacuum low temperature will not destroy the quality of the waste oil which
Is good for recycle.
3. End product after regeneration:
A. Clean and bright, moisture content less than 100PPM, separation degree of the heavy and clean oil is more than 90%
B. The quality of the heavy and clean oil achieves or exceeds the new oil.
C. Recycle rate achieve more than 80%
4. Equipment Configuration:
A. Not fussy about the waste oil, it can recycle the waste oil no matter what condition it is.
Used Oil Recycling machine (Turnkey Plant)
1. Purify the used machinery oil, hydraulic oil, compressor oil, motor oil, mediate-load gear oil, cooler oil, steel rolling oil, quench oil, flash swift quench oil, etc. In mine, metallurgical industry, machinery, chemical industry, rubber industry, instrument, traffic, petroleum drilling and exploring, construction ceramics, precision pressure casting, etc.
2. The viscosity is less than 500CST and flash point is higher than 900° C
3. The process is carried out by PLC with intelligent inspection and automatic control.
Moisture content |
10PPM |
Mechanical impurities |
‹ 0.022% |
Pollution Degree |
‹ NAS9 |
Be compare with new oil, viscosity change rate |
‹+5% |
Filter accuracy |
3 micron |
Efficiency |
95% |
Installed power |
17KW |
Regenerated oil quantity |
800-1000KG/8H. |
We sincerely hope establishing long and friendly business relations with clients from all over the world. Our goal is not just providing product, but also providing a complete solution including product design, tooling, fabrication and service for our customers to achieve their upmost satisfaction.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price.
Our company has always insisted on relying quality to seek survival, benefit to seek development. Use fine after-sale service to meet the needs of consumers. Honesty and credit. Products are sold well all over our country. Warmly welcome all fields of friends to visit our company and negotiate trade.
We sincerely welcome new and old customers at home and abroad. Let us work together to develop the international market.
Welcome to order, we will serve you.