Product Specifications
Prod Model: |
Electric Lattice Tension Tower for Power |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Material: |
Q235,Q345,Q420 |
Height: |
According to Your Request |
Type: |
Lattice Tension Tower |
Place Of Origin: |
Qingdao, Shandong, China |
Surface Treatment: |
Hot-DIP Galvanized |
Hot-DIP Galvanized: |
ASTM a 123 |
Connection Type: |
Bolts and Nuts |
Bolts And Nuts: |
ASTM a 394 |
Hs.Code: |
7308200000 |
Life Span: |
More Than 30 Years |
Usage: |
Tension Tower |
Conductor Circuit: |
Single Circuit |
Certification: |
ISO |
Materials: |
Steel |
Standard: |
Standard |
Style: |
Independence Tower |
Structure: |
M Type |
Product Description
Electric Lattice Tension Tower for Power Transmission
Electric Lattice Tension Tower for Powerare made up of many different steel structural components connected together with bolts or welded. Many different types of lattice steel towers exist. These towers are also called self-supporting transmission towers or free-standing towers, due to their ability to support themselves. These towers are not always made of steel; they can also be made of aluminum or galvanized steel.
In city or rural area power transmission line, Electric Lattice Tension Tower for Power are often used. Especially in the power transmission line direction need to changed condition, high and middle voltage AC and DC systems are often used. Qingdao Boxiang professionally provides 10-500kv angle changed steel tubular tower for every domestic and overseas clients. Tower structures are classified as angle suspension, angle strain, and angle dead-end.
Boxiang fabricates every structure 10-500kv Electric Lattice Tension Tower for Power by solid steel legs and angle iron cross members & pipes. Structures can reach heights even up to 200 meter as per client requirements.
Boxiang is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
After fabrication all 10-500kv Electric Lattice Tension Tower for Power are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
Qingdao Boxiang Steel Structure Co., Ltd mainly deals with the service of fabrication of steel tower. Also complying with the request of different clients', we could design according to the design parameters based on our production and design experience with professional design software. Based on good communication with customers, we always have a good performance at last and establish long-term and win-win cooperation relationship.
10-500kvElectric Lattice Tension Tower for Power are one of our main products that supports the overhead transmission lines.Electric Lattice Tension Tower for Power have to carry the heavy transmission conductor at a sufficient safe height from ground. In addition to that all towers have to sustain all kinds of natural calamities.
Advanced production machines make sure our fabrication efficiency and high qulity of the products. Several angle production line are very fit for mass production so as to save cost and time for our value customers.
Process of fabrication comprises of cutting, satmping, strengthening, punching, notching, bending and heel grinding.
Through the above process, the products are ready for galvanizing which is one of critical process in all production.
Details of Galvanizing:
1. Degreasing of tower parts with Sodium Hydroxide solution.
2. Pickling to clean up the surface with HCl solution
3. Rinsing twice with fresh water to remove the acid content.
4. Fluxing wth synth flux to prepare surface for galvanizing.
5. Drying on hot plate.
6. Dipping in zinc bath with 99.95% pure zinc at 450° C to 465° C temperature.
7. Quenching in water.
8. Dichromating.
Thickness< 5mm, galvanization thickness≥ 460G/M² (65um)
Thickness> 5mm, galvanization thickness≥ 610G/M² (86um)
All our galvanizing zinc thickness is strictly tested before delivery in view of its importance.
To make an offer for the tower we need the following inputs from you.
1. Height of tower
2. Type of tower
3. Materia of tower
4. Quantity of tower
5. Details of loads
6. Wind speed applicable
Welcome to contact us:
Address: Industrial Park of Jiaolai Town, Jiaozhou, Qingdao, China.
Tel: 86-532-88221819 Fax: 86-532-88225688 Phone: 86-15666681682
Height | From 9 meter to 100 meter |
Suit for | Electric Power Transmission and Distribution |
Shape | Angle |
Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
Power Capacity | 10KV to 500KV |
Tolerance of the dimension | According to your requirement. |
Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. Thickness< 5mm, galvanization thickness≥ 460G/M² (65um) Thickness> 5mm, galvanization thickness≥ 610G/M² (86um) |
Joint of Section | bolts and nuts. |
Standard | ISO 9001:2008 |
Length of per section | According to your request. |
Welding Standard | AWS (American Welding Society ) D 1.1 CO2 welding or Submerged arc auto methods |
Thickness | 1 mm to 36mm |
Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages |
Capacity | Product | Annual Production Capacity(TON) | Monthly Production Capacity(TON) |
1 | Tubular Tower | 24000 | 2000 |
2 | AngleTower | 24000 | 2000 |
3 | Steel Structure | 12000 | 1000 |
4 | Total Production Capacity | 60000 | 5000 |
Qingdao Boxiang Steel Structure Co., Ltd. is professional manufacturer of Electric Tower (Electric Angle Tower, Electric Tubular Tower, Substation Structure), Telecommunication Tower (Communication Tower, Television Tower, Medium-wave Tower, Single Pole Tower, Decorating Tower), and other types of steel structure.
We mainly deal with the service of fabrication of steel tower. Also complying with the request of different clients', we could design according to the design parameters based on our production and design experience with professional design software. Based on good communication with customers, we always have a good performance at last and establish long-term and win-win cooperation relationship.
There are more than 15 engineers and 15 after sales service personnel in our factory. Anything wrong with the products will be dealt as soon as possible.
Devoting to develop into a leading enterprise of steel tower, we have been improving our production equipments, testing equipments and upgrade techniques all the time to comply with the requirement of all the clients.
We have a factory our self which size is more than 27, 800 Square meters. There are more than 80 workers, including 12 high-skilled ones.
15 experienced engineers are working for us whose job is to design and communicate with clients on technical matters until getting a satisfied performance.
24Hours' service and 15 sales help our clients to solve any problems as soon as possible.
Trust us, we will provide our best solutions for you.