Epoxy Ester Primer of Iron Red (H53-3)

Product Specifications

Prod Model:	H53-3
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Components:	Film Forming Matter
Drying Method:	Air Drying
Formation Mechanism:	Conversion Type
Main Raw Material:	Epoxy
Appearance:	Liquid
Certification:	ISO9001
Level:	Primer
Substrate:	Steel
Color:	Iron Red or Light Yellow
Method:	Spray; Roller; Brush

Product Description

Intended Uses Iron  red  epoxy ester primer is suited for ferrous  metal surface, andzine yellow epoxy ester primer is suited for aluminium and aluminium magnesium surface. Both primers can match with etching primer which will improve film's resistance to moisture, salt fog, and corrosion. Each of them forms a tough, durable coating with good adhesion. Product Description   Iron red or light yellow. Product Information   Volume Solids: 46% Dry Film Thickness:40 microns equivalent to 87 microns of wet film Theoretical Coverage:118g/ Practical Coverage:Allow appropriate loss Application  Details Method of Application:        Airless Spray:  Recommeded-Tip range:0.30-0.53mm; Total output fluid pressure >17.6MPa        Brush or Roller:  Recommended        Conventional Spray:  Recommended Thinner   X-7 Storage Life  One year Drying Time(Substrate Temperature 25ºC)          Touch Dry  ≤4h       Hard Dry   ≤24h          Overcoating Interval:Minimum   24h    Maximum  14days Storage and  Handlina Storage : Store in cool and dry conditons Pack Size  25 kg Flash Point:   30ºC Specific Gravity : Approx 1.3-1.4Kg/L Subsequent Paint Nitrolacquer and various phenolic aldehyde and alcohol acid surface paints Limitations Recommened coat: Spray two coats with high-pressure airless spray and dry film tickness should reach 80microns Subsequent coat: Epoxy resin paint, chlorinated rubher paint, chorosulphonated polyethylene paint etc. Safety Precautions This product should be used in painting area by professional operators.When painting, please refer to Product Data Sheet and MSDS.Consult our company if consumers could not completely understand the precautions for safety and health when applying this product. This product is a kind of solvent-based paint.ln order to avoid danger or accident, minimal safety precautions, as follow, should be done: The paint contains volatile solvent and is flammable.So must keep away from sparks and open flames.No smoking at application site.Effective precautions(such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc)also should be done so as to avoid producing sparks.Flash point of paint, mentioned above on Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air. Enough ventilation is necessary at application site.ln order to remove any danger of explosion,must keep the ratio of gas to air is less than 10% ,the minimum explosive limit in generaLTherefore,200m³ of ventilation quantity per 1 Kg solvent(according to the solvent)is necessary. Protect skin and eyes, and avoid touching with paints(Recommend to wear working clothes, gloves eye protection, face masks, barrier creams and so on).If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner.ln case of eyes being contaminated,  rinse with fresh water for 10min at least and give medical treatment immediately. Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas,especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination. NOTICE: If consumers have not taken effective safety precautions(Refer to the specifications), our company will NOT be responsible for any accident.