Categories
Price: | Negotiable/Piece |
---|---|
Min Order: | 1 /Piece |
Prod Model: | GLC-EPSP394 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Use: | Appliance Paint |
Appearance: | Liquid |
Level: | Finish Coat |
Substrate: | Steel |
Method: | Spray, Brush or Roller |
GREEN LEAF CHEMICAL LIMITED | ||||||
GREEN LEAF Handbook of industrial protective coatings |
Epoxy Phenolic Tank Coating (conductive paint) EPSP394 gray black |
|||||
Application | Thin film tank coating for storing a wide range of substances, including alcohol mixed with gasoline and flammable liquids which can cause a fire wall tanks and containers. | |||||
Products Introduction | Two cans, epoxy phenolic tank coatings, anti-static. | |||||
Product data | Solid volume | 50% | ||||
Dry film thickness | 125microns | |||||
Theoretical spreading rate | 2.68m 2 /kg | |||||
Practical Coverage | Allow appropriate loss | |||||
Works described in detail | Mixing ratio | Part A (paint): B (curing agent) = 4:1(weight ratio) | ||||
Construction method | ||||||
Airless spray |
Recommended by: nozzle width 0.53 ~ 0.68(21~27) Vent fluid pressure> 17.6MPa (176kg / cm2) |
|||||
Brush or roller | Applies only to a small area, including touch-up painting, need to repeat the brush to | |||||
Conventional spray | Not recommended | |||||
Thinner | In addition to using temporary primer, if the need to use the BW 103(Up to 5% dilution). | |||||
Paint equipment cleaning agent | BW103 | |||||
Reaction induction time | 10-35 degree centigrade for 15 minutes under the conditions | |||||
Use of | 10-35 degree centigrade, 1 hour (after reaction induction time) | |||||
Shelf | One year | |||||
Drying time | ||||||
Substrate temperature | Surface dry (h) | Completely dry (h) | Repeat brushing interval | |||
The shortest | The longest | |||||
5 degree centigrade 23 degree centigrade 35 degree centigrade |
6 3 1 |
12 8 3 |
24h 24h 24h |
14days 7days 3days |
||
Storage and management | Storage | Store in a cool and dry environment. Not higher than 35 degree centigrade | ||||
Flashpoint | > 20 degree centigrade (composition or mixture) | |||||
Packing |
A: 20kg in the 20 liter container B: 5kg in 10liter containers |
|||||
Proportion | About 1.49 kg / liter | |||||
Technical requirements and surface treatment |
Contact our company about the details of the inner wall coating Secondary coated surface must be clean, dry and free of dirt, according to SSPC-SPI solvent to remove surface oil, remove welding slag, polished weld metal and sharp edges at required place, sandblasted to Sa2.5(Swedish Standard SIS055900) the conductive paint should coating prior to oxidation on the steel, if oxidation has occurred, re-complete oxidation part should be blast to the above required standards. |
|||||
Restrictions |
Contact ourcompany to confirm whether the product is suitable for storage items. This product can not be fully cured at low temperatures , and for the best results, steel temperature should be higher than 10 degree centigrade, and higher than naught, at least 3 degree centigrade, the maximum relative humidity should be 80%. |
|||||
Safety measures | See“Summary of Paint" |