www.solidson.com
We can supply all kinds of BMC/DMC insulating Cable Brackets, fixing frame, insulating holder...Etc, and we can also design according the customers' requirements or OEM BMC/DMC products with special specification.
Material could be local or imported...
Physical Properties |
Unit |
SMC-1 |
SMC-2 |
SMC-3 |
Density |
g/cm 3 |
1.75-1.95 |
Water Absorption |
mg |
≤ 20 |
≤ 20 |
--- |
Shrinkage |
% |
≤ 0.15 |
≤ 0.15 |
≤ 0.30 |
Heat Deflection Temperature |
Deg. C |
≥ 240 |
≥ 240 |
≥ 220 |
Lodz Impact Strength(unnotched) |
kJ/m 2 |
≥ 90 |
≥ 60 |
≥ 45 |
Flexural Strength |
Mpa |
≥ 170 |
≥ 150 |
≥ 135 |
Electrical Resistance |
Normal |
Ω |
≥ 1.0*10 13 |
≥ 1.0*10 13 |
≥ 1.0*10 12 |
24h in water |
≥ 1.0*10 12 |
≥ 1.0*10 12 |
--- |
Dielectric Strength (at 90Deg.C in Oil) |
kV/mm |
≥ 12 |
≥ 12 |
≥ 10 |
Dielectric Loss Factor (at 1 MHz) |
---- |
≤ 0.015 |
≤ 0.015 |
--- |
Dielectric Constant (at 1 MHz) |
---- |
≤ 4.5 |
≤ 4.5 |
--- |
Surface resistivity |
S |
≥ 180 |
≥ 180 |
≥ 150 |
Tracking Resistivity (PTI) |
V |
≥ 600 |
Flammability |
---- |
FV0 |
FV0 |
--- |
Long Term Heat Resistance Temperature |
---- |
155 |
155 |
130 |
These above specifications are made by national standard.Our products can meet the requirements according customers specification. |
Solidson Advanced Composite Hi-tech Co., Ltd was established in 2008 and is an expert FRP (Fiber Reinforced Polymer) composite exporter in electrical insulation and sports equipment fields. Solidson devotes herself into providing low cost, reliable smart and flexile service and products to the market under the environments of global business integration.
In electrical insulation application, Solidson mainly supplies BMC(DMC)/SMC electric insulating parts, silicon rubber coated composite insulators, surge/lightning arresters, fuses...etc.
In sports equipment application, we supplies FRP fishing rods, FRP bicycles, Golf clubs, FRP rackets, surf boards...etc.
Solidson Advanced Composite specially provides products according customers specifications and requirements, such as OEM or ODM.
In FRP composite process, Solidson experts in BMC/SMC thermal press-moulding, RTM, VPI, Hand lay-up, pre-impregnation moulding...And so on.
Meanwhile, Solidson also provides R&D on FRP process. We have strong capabilities on calculation, analysis, inspection, testing in FRP composite fields.
It will be with great pleasure to work directly on your project, and for your success this time, next time, any time.