Product Specifications
Product Description
Beyondopto SDI over fiber converter is an ideal and economic solution for broadcasting or surveillance applications. It receives one HD-SDI electrical input, perfectly converts electrical SDI signal to single mode optic SDI signal. It supports transmission image of SDTV (143-540Mbps), HDTV (1.485Gbps) and HDTV (3Gbps, 1080p60).
Both transmitter and receiver provide equalizing and reclocking at input unit in order to re-construct the signal for consistent quality. Besides, with Transwan advanced fiber technology, VSDI can easily pass pathological pattern to prove its complete transmission.
Hd-sdi optical transceiver, dedicated security HD SDI monitor, high-definition conference system, support 1080 p (25 hz, 30 hz, 50hz, 60hz) / 1080 I / 720P. Beyondopto hd SDI optical transceiver product customer development use for radio, film and television industry, the earliest application in the television studio, the universiade on live radio, and later extended to SDI hd monitoring field.
@ 1 channel video and audio transmission of digital video signal over optic fiber
@ Handles pathological pattern
@ Automatic cable equalization to ensure signal integrity
@ Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s
@ Support signal type: 270Mbit/s to 3Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M standards
@ Long transmission capability at least 10 km(6.2 miles), up to 80 km
@ Terminal block power input for industrial application
@Supports hot swapping and hot plugging
@Simplex LC/PC single mode optical connection
HD-SDI TO FIBER CONVERTER typical applications:
HD-SDI monitor system;
Animals, filming;
Live on optical fiber transmission;
TV remote studio;
The military and public security command and control
SDI TO Fiber Multiplexers is hd SDI necessary transmission equipment of the monitoring system, how to identify the SMPTE standard SDI optical transceiver also confused with so many users, it can through SDI pathological code test to verify. Transfer characteristic difference of hd-sdi optical transceiver reluctantly when transmission rate signal specifications are available, but when the problem of irregular rate signal transmission immediately reflected, under 1.5 G rate (720 p or 1080 I used) lower, problems of probability under 3 G rate (1080) p application problems of probability is high, main performance for high definition video transmission sometimes appear in the process of the splash screen, black screen, blue screen, images cannot guarantee continuous smooth playback, the cause of these problems basically has two: First, adopt hd-sdi optical transceiver scheme not mature or design defects, this reason minority; Second, cost factors, on the market most of the hd-sdi optical transceiver using common SFP optical module, which USES the rate of 1.25 G and 1.25 G rate digital SFP optical module instead of hd-sdi special VIDIO optical transceiver SFP optical modules, so inevitable when transmission rate of irregular large error. Hd-sdi application field of optical transceiver have higher picture quality requirements, natural intolerable, the picture is not smooth, so should adopt hd-sdi special VIDIO optical transceiver SFP optical module, to ensure that high-definition image transmission in the process without the splash screen, black screen, the phenomenon such as blue screen.
Wavelength | 1310nm&1470nm~1610nm |
Output Power | -9~-3dBm / -3~+2dBm |
Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
Rx sensitivity | -18dBm |
Optical connector | LC/PC (optional) |
Distance | 0~500M (MM) / 0~80KM (SM) |
Video:
SDI Input |
Signal Type SDI | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data Rates | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable)
250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
Connector | BNC 75 Ohm |
Number of tranmitter channel | 1 |
Number of tranmitter Loopout | 1 |
Number of receiver output | 2 |
General: |
Input Power | 5 V DC or12 V DC |
Power consumption (maximum) | Transmitter: 1.8W Receiver: 1.5W |
Operating temperature | 0°C to 55°C |
Storage temperature | -10°C to 70°C |
Operating humidity | 0 ~ 95% (non-condensing) |
Net Weight | 210g /pair (with Power supply 440g/pair) |
Case material | Aluminum |
Headquartered in ShenZhen, Beyond Optoelectronic Technology Co., Ltd has developed a reputation for being an innovative designer, developer and manufacturer of advanced enterprise digital video surveillance hardware and software products and peripheral solutions for government, military and enterprise. The main products include SD/HD/3G-SDI Fiber converter, HDMI /DVI /VGA /HDCVI/KVM (VGA/DVI+Keybaord+Mouse)fiber converter, Fiber Optical converter Video/Audio/Data/Ethernet/Contact closure/Telephone Transmission, VIDEO SFP, fiber optic transceivers, and provides OEM (ODM)services. Beyond operating worldwide market and cooperating with partners in more than 30 countries. And our products have been extensively used in security surveillance, Intelligent Transportation Systems (ITS ), Broadcast and Multimedia Video, Process Control, Video conferencing, etc.
Please contact us, we will gladly provide you with a technical proposal or solution that best meets your needs.