Heatless Regeneration Desiccant Air Dryer (BDAH-2200)

Working Principle:
Heatless regeneration desiccant air dryer is equipment to dry compressed air by using pore shape desiccant to dry water molecule sieve; it is based on the principle of Pressure Swing Adsorption
 
Performance:
Regeneration air capacity: ≤14%
Inlet Oil Content: ≤0.1PPM
Working Pressure: 0.6~0.95MPa
Dew Point Pressure: -20~-40ºC
Desiccant:  Activated Alumina
Control Method:  Micro PC Automatically
Installation: Indoor Location, anchor bolt installation
 
Standard working conditions
-Inlet temperature: 2~45ºC
-Nominal inlet pressure: 0.069MPa
Screw Standard:  GB/T7306
Power Consumption: 100w
Flange standard: HG20592
 
Options:
-Desiccant: molecule sieve
-Full dew point-controlled
-Dual pre-and after filters.
-Remote communicating,
 
Features of Desiccant Air Dryer:
According to the demand on the air consumption for regeneration, the desiccant air dryer are divided into no heat type and micro heat(heat purge) type. Heatless regeneration desiccant air dryer is equipment to dry compressed air by using pore shape desiccant to dry water molecule sieve; it is based on the principle of Pressure Swing Adsorption. Heat purge regeneration desiccant air dryer is working with regenerative air and warm the desiccant then re-use it. It not only improves the regeneration effect also reduces air consumption with energy-saving function.
 
The desiccant air dryer uses molecular sieve or alumina as the desiccant to adsorb moisture in the compressed air under a certain working pressure. Then, re-lead a part of dry air from the dryer outlet for desorption at atmospheric pressure. One tower is for water adsorption and another for desorption and regeneration. The two towers can work continuously to provide the air consuming equipment with dry, clean compressed air. 

The twin tower dryer is widely used for outdoor applications requiring compressed air in cold areas, indoor applications requiring compressed air of long-distance pipeline transportation, and manufacturing process requiring deep drying, such as advanced spraying, jet flow control, polyester spinning etc. 


Why Broatek?
1.     Wide product range. Shanghai Broatek provide various kinds of options for desiccant regenerated air dryers, including heatless air dryer, heat purge air dryer, compressed air dryer, heat purge with blower air dryer and combined type air dryer. Working pressure is from standard, middle and high pressure. Capacity from 0.8/min~500m/min. Dew point is from -12ºC~-70ºC. Two tower shift period is from 4min~8hours.Desiccant use activated alumina or molecule sieve. Control method we use PLC micro pc. And the power is from 220v/1ph/50HZ~380v/3ph/50HZ etc. We can also make your special requirement for zero loss regeneration HOC.
2.     Strict product testing: To ensure the product quality, we introduced advanced testing equipment to test air flow, pressure, intake temperature, dew point and other technical data.
3.     Air system:
-To eliminate Channeling phenomenon: The air distributor in desiccant tower is using big section stainless steel diffuser, this is guarantee the air evenly go through the desiccant, avoid the channeling phenomenon, anti-corrosion and long lasting.
-Energy saving working condition settable: The regenerated capacity could be set in energy saving working conditions according to the requirement for dew point, pressure, temperature etc.
- Zero consumption of regeneration: Proper design of the tower keeps 95% heat desiccant, greatly enhanced the desorption capacity of equipment, makes the regeneration more thoroughly.
-Stable quality of air source: Reverse convection drying and regeneration, avoiding the pollution of desiccant; ensure the stable quality of air source.
4.     Control System:
- Human-computer interaction, remote control: color touch screen, information sharable from
distance host.
-PLS micro pc control: Use Germany Siemens PLC, with reliable and strong functions.
-Optional working conditions: Client is easily choose testing condition, summer condition, winter condition, 50% air condition, -40ºC and -20ºC dew point condition.
-Adsorption drying time (optional): we use dew point control method, 100% ensure the air quality.
-Exhaust wetness testing:
-Alarm to average pressure disorder (optional)
-Breakdown signal alarm (optional)

Technical data

Basic Technical Data Of BROATEK Desiccant Air Dryer
Heatless Desiccant Air Dryer	Heat Purge Desiccant Airy Dryer
Intake Temperature: 2~45ºC	Intake Temperature: 2~45ºC
Inlet Oil Content: ≤0.1PPM	Inlet Oil Content: ≤0.1PPM
Working Pressure: 0.6~0.95MPa	Working Pressure: 0.6~0.95MPa
Dew Point Pressure: -20~-40ºC	Dew Point Pressure: -20~-40ºC
Regeneration air capacity: ≤14%	Regeneration air capacity: ≤7%
Screw Standard:  GB/T7306	Screw Standard:  GB/T7306
Power Consumption:  100w	Power Consumption:  80%
Flange standard: HG20592	Flange standard: HG20592
Desiccant:  Activated Alumina	Desiccant:  Activated Alumina
Control Method:  Micro PC Automatical	Control Method:  Micro PC Automatical
Installation: Indoor Location, anchor bolt installation	Installation: Indoor Location, anchor bolt installation
Compression Heat Desiccant Air Dryer	Compressed Air Combined Type Desiccators
Intake Temperature:120~180ºC	Regeneration air capacity : ≤3%
Inlet Oil Content:≤0.1PPM	Dew Point Pressure: -40~-60ºC
Working Pressure: 0.6~0.95MPa	Pressure Loss: ≤0.05MPa
Dew Point Pressure: -12~-60ºC	Standard Cycle Period:  4~8hours
Working Cycle:  4~8 Hours	Desiccant lifetime:  3~5years
Power Consumption:  200w	Screw Standard:  GB/T7306
Flange standard: HG20592	Flange standard: HG20592
Pressure Loss:  ≤0.04MPa	Networking Remote Diagnosis
Regeneration air capacity : ≤1%	Control Method:  Micro PC Automatical
Control Method:  Micro PC Automatical	Installation: Indoor Location

Shanghai Broatek Provide various kinds of air dryers , filters and PSA nitrogen generators. Below is the 
specification chart for your reference.

Heatless Desiccant Air Dryer
Model	Capacitym3/     min	Dimension  mm			Inlet/outlet	Desiccant	Weight
		L	W	H	Size	Weight (kg)	(kg)
BDAH-08	0.8	500	480	1320	R1/2	16	55
BDAH-17	1.7	600	540	1680	R3/4	34	78
BDAH-26	2.6	739	700	1660	R1-1/4	52	150
BDAH-38	3.8	739	700	1906	R1-1/4	72	235
BDAH-55	5.5	900	885	1880	R1-1/2	104	275
BDAH-69	6.9	950	925	1760	R1-1/2	138	336
BDAH-80	8	1024	1000	1845	DN50	170	375
BDAH-100	10	1024	1000	1995	DN50	200	420
BDAH-135	13.5	1024	1000	2320	DN50	270	480
BDAH-170	17	1200	1000	2180	DN65	300	560
BDAH-220	22	1332	1200	2345	DN65	440	740
BDAH-270	27	1382	1200	2152	DN80	570	900
BDAH-320	32	1466	1200	2150	DN80	640	1020
BDAH-370	37	1466	1200	2370	DN80	700	1140
BDAH-450	45	1633	1370	2464	DN80	870	1450
BDAH-550	55	1730	1400	2684	DN100	1060	1800
BDAH-650	65	1936	1400	2670	DN125	1340	2180
BDAH-850	85	2236	1650	2823	DN125	1600	2500
BDAH-1100	110	2280	2190	3100	DN150	2000	3200
BDAH-1300	130	2400	2200	3200	DN150	2300	3500
BDAH-1600	160	2650	2400	3400	DN150	2900	4600
BDAH-1900	190	2738	2190	3270	DN200	3400	5500
BDAH-2200	220	3146	2540	3490	DN200	4400	6900
BDAH-2600	260	3800	3000	3800	DN250	5200	8000
BDAH-3000	300	4000	3000	3800	DN250	6000	8900
Inlet Temperature: 2~50ºC       Inlet oil content: ≤0.1PPM            Working Pressure: 0.6-1.0MPa Pressure Dewpoint: -40~-60ºC    Regeneration air capacity: ≤14%     Desiccant: Activated Alumina Control Method: Micro Computer-Control  Installation Method: Indoor Location, anchor bolt installation.
Heat Purge Desiccant Air Dryer
Model	Capacitym3/     min	Dimension  mm			Electric Heat	Desiccant	Weight
		L	W	H	Power(kw)	Weight (kg)	(kg)
BDAP-38	3.8	739	700	1906	1.8	72	300
BDAP-55	5.5	885	900	1880	2.6	104	410
BDAP-69	6.9	925	950	1760	3.6	138	500
BDAP-80	8	1024	1000	1845	4	160	580
BDAP-100	10	1024	1000	1995	5.1	200	655
BDAP-135	13.5	1024	1000	2320	6.5	260	690
BDAP-170	17	1200	1000	2180	7.5	300	840
BDAP-220	22	1332	1200	2345	10.8	440	1130
BDAP-270	27	1382	1200	2152	14.4	570	1245
BDAP-320	32	1466	1200	2150	16	640	1345
BDAP-370	37	1466	1200	2374	18	700	1510
BDAP-450	45	1633	1370	2464	22.5	870	1820
BDAP-550	55	1730	1400	2684	27	1060	2200
BDAP-650	65	1936	1400	2670	34.5	1340	2790
BDAP-850	85	2236	1650	2823	40.5	1600	3500
BDAP-1100	110	2280	2190	3100	51	2000	3840
BDAP-1300	130	2400	2200	3200	57	2300	4450
BDAP-1600	160	2650	2400	3400	72	2900	5200
BDAP-1900	190	2738	2190	3270	87	3400	6100
BDAP-2200	220	3146	2540	3490	111	4400	7600
BDAP-2600	260	3800	3000	3800	132	5200	8800
BDAP-3000	300	4000	3000	3800	150	6000	9700
BDAP-4000	400	4300	3200	3800	201	8000	14200
BDAP-5000	500	4500	3200	3800	252	10000	15000
air-inlet temperature: 2~50ºC    Air-inlet oil carried-over:≤0.1PPM     Working pressure: 0.6-1.0MPa Dew point: -20~-40ºC           Regenerative air capacity: ≤7%              Desiccant: Activated alumina Controls: PLC                      Installation: Indoor with Anchor bolt.
Compression Heat Desiccant Air Dryer
Model	Capacitym3/     min	Dimension  mm			Cooling water	Desiccant	Weight
		L	W	H	circulation T/h	Weight (kg)	(kg)
BCAD-135	13.5	1800	1600	2400	7	0.24	1000
BCAD-170	17	2000	1600	2400	8.5	0.26	1200
BCAD-220	22	2200	1600	2600	11	0.33	1600
BCAD-270	27	2400	1800	2700	14	0.45	1800
BCAD-320	32	2400	1800	2900	16	0.48	2100
BCAD-370	37	2500	1900	2900	19	0.56	2300
BCAD-450	45	2600	2000	2900	23	0.68	2700
BCAD-550	55	2600	2200	3000	28	0.83	3200
BCAD-650	65	2800	2400	3200	33	0.98	3700
BCAD-850	85	3000	2600	3200	44	1.28	4500
BCAD-1100	110	3200	3000	3400	55	1.65	5500
BCAD-1300	130	3400	3200	3400	65	1.95	6400
BCAD-1600	160	3600	3400	3400	80	2.4	7500
BCAD-1900	190	3800	3600	3400	95	2.85	9000
BCAD-2200	220	4000	3800	3600	110	3.3	10500
BCAD-2600	260	4200	4000	3800	130	3.9	12000
BCAD-3000	300	4400	4200	3800	150	4.5	13500
BCAD-4000	400	5000	4600	3800	200	6	16500
BCAD-5000	500	5600	5000	3800	250	7.5	20000
air-inlet temperature: 120~180ºC  Air-inlet oil carried-over:≤0.1PPM  Working pressure: 0.6-0.95MPa Dew point: --12~60ºC           Regenerative air capacity: ≤1%              Desiccant: Activated alumina Controls: PLC                      Installation: Indoor with Anchor bolt.
Combined Type Desiccant Air Dryer
Model	Capacitym3/     min	Dimension  mm			Water	Desiccant	Weight
		L	W	H	Consumption T/h	Weight (kg)	(kg)
BMAD-135	13.5	1250	1350	2000	1.7	260	770
BMAD-170	17	1350	1500	2200	2.1	340	980
BMAD-220	22	1500	1600	2400	2.6	440	1180
BMAD-270	27	1600	1700	2500	3.2	540	1400
BMAD-320	32	1680	1800	2500	3.8	640	1700
BMAD-370	37	1710	1850	2500	4.4	740	1900
BMAD-450	45	1750	1900	2650	5.4	900	2150
BMAD-550	55	1850	2000	2850	6.6	1100	2550
BMAD-650	65	2000	2200	3000	7.8	1300	2850
BMAD-850	85	2150	2300	3100	10.2	1700	3100
BMAD-1100	110	2400	2600	3200	13.2	2200	4250
BMAD-1300	130	2400	2700	3200	15.6	2600	4950
BMAD-1600	160	2600	3100	3300	19.2	3200	5500
BMAD-1900	190	2900	3500	3400	22.8	3400	6400
BMAD-2200	220	3200	3700	3600	26.4	4400	7700
BMAD-2600	260	3800	4200	3800	31.2	5200	11500
BMAD-3000	300	4000	4500	3800	36	6000	12600
BMAD-4000	400	4300	4800	3800	48	8000	16000
BMAD-5000	500	4500	5200	3800	60	10000	19000
Pressure Lose≤: 0.05MPa  Standard Cycle life: 4~8hrs            Desiccant life: 3~5years Dew point: -40~60ºC           Regenerative air capacity: ≤3%              Desiccant: Activated alumina Controls: PLC                      Installation: Indoor with Anchor bolt.

BROATEK heatless desiccent air dryer.