Product Specifications
| Prod Model: |
YY06-HC, YY06-FC |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Classification: |
Ceramics |
Product Description
Honeycomb Ceramics
Ceramic honeycomb has many advantages such as small size, light weight, large surface area, high refractoriness, high heat capacity, low air flow resistance loss, and so on. Compared with regenerative ball, honeycomb ceramic is more difficult to plug straight airflow path; honeycomb ceramic regenerative chamber volume also significantly reduced, a sufficient amount of burners can be arranged to meet the needs of the thermal load. Honeycomb ceramic can guarantee temperature uniformity, rapid heat transfer, low oxygen combustion, significantly reducing oxidation loss and NOx gases generated, significantly improving environmental protection and energy-saving effect.
Yuanying honeycomb ceramic catalyst carrier has many advantages such as great geometric surface area, low exhaust resistance, low volume density, high compressive strength, stable chemical properties, rapid heating and thin pore walls. Common carrier material is cordierite, its service temperature up to 1300 ºC, wall thickness up to 0.15mm, number of holes up to 600 cells / square inch
Honeycomb ceramic filters used new ceramic materials and high-quality high-density straight hole mesh structure, its inner wall has a natural chemical adsorption (affinity) capability to the oxide, can adsorb impurities in metal liquid and filter particles smaller than the pore size. Straight hole designed can ensure strength and thermal shock resistance, keep flow and strength in balance, rectify the metal melt, reduce vortex, prevent air bubbles generated, make the turbulent flow of molten metal into a steady laminar flow, to ensure smooth and continuous casting, and ensure smooth filling. Honeycomb ceramic filter can simplify casting system, reducing casting porosity, significantly improve casting metallurgical structure, mechanical properties, surface quality and percent of pass, extending its service life.
Infrared ceramic combustion plate is the core component of the gas infrared heaters, on its 65 * 45mm area on evenly arranged thousands flame paths, flame path wall coated with high quality combustion catalyst. When sufficient pressure gas goes into the flame paths of the ceramic combustion plate, it premixes with air and fully burns fiercely in the flame paths, the combustion plate showing hot state, but the surface is no flame and smoke. The heat generated by the combustion to the object cores by the way of infrared radiation, which ensures heating effectiveness and efficiency and reduces the emission of CH, NOx, CO (reduced by more than 70%) and other harmful gases. Infrared burner for heating, drying, insulating, warming, barbecuing, there are no phenomenon of "carbon deposition", outdoor good anti-wind speed ability, easy to install, high efficiency and energy saving, cost reduction one above half. It has been widely used in industrial paint, printing and dyeing, food and other industries.
Foamed Ceramics
Foamed ceramics is a kind of low density (0.25-0.65g/cm3), high porosity (60-90%) of liquid metal filter. Its uniform texture, communicated three-dimensional network skeleton structure can effectively convert the turbulent flow of the solution into a very steady laminar flow and drain away the gas, so that the filling smooth, greatly improved casting quality
Yuanying foamed ceramics filter not only has high through-hole rate, high surface area, good thermal shock resistance, low flow resistance, high temperature resistance, good corrosion resistance and other characteristics, but also has excellent filtering function such as mesh screening, residue collection, implantation, etc. and can effectively filter out impurities small to tens of microns.
Ceramic foam widely used in metal melt filtration, high-temperature flue gas purification, solid heat exchangers, chemical filtration, special packing, catalyst support and photothermal transformation.
Effectiveness of foamed ceramics filter:
1. Filtered casting debris, reduce casting gas;
2. Improving casting metallurgical structure, increasing casting compressive sealing, enhancing elongation and tensile strength;
3. Reducing reoxidation defects of casting interior, reducing casting surface defects, reducing casting rate of spoiled;
4. Simplifying the gating system design, reducing the length of the cross gate;
5. Reduce processing time, reduce tool damaged and improve the finished surface quality of the casting;
6. Work without dregs or fracture phenomena;
7. Stable flow rate of molten metal. Flow rate of straight holes ceramic filter will be gradually dropped along with an increase in the number of captured inclusions; the flow rate of the ceramic foam is very stable, even in the case of much more inclusions will not cause clogging of the filter;
8. Good chemical stability, not affected by the pH of the liquid metal, without changing the chemical composition of liquid metal.
9. High dimensional accuracy, it can be used to automatical production line.
Yuanying Industry Limited was founded in 1996, has been committed to chemical and ceramic industry research, development and production and become the industrial leader. Yuanying has a number of outstanding professional and technical personnel, such as mold engineers, water engineers, material engineers, tower structural design engineers, quality engineers, etc. Yuanying has first-class production equipment and testing equipment, advanced processing technology, perfect quality control process.
Over the years, for our client, much has been committed to offer the most accurate product solutions, the best quality service and a full range of technical consultation. We will not only focus on our products, but also focus on the implementation process of our customer's products. Yuanying preeminent team can achieve different products performance according to the different requirements of customers, moreover, Yuanying provide excellent guidance, design and even on-site service in customer product realization process. Our philosophy is to serve customers, Yuanying not only provide high-quality products to customer needs, but also provides attentive services to customer needs.
Our products are mainly concentrated in adsorbents and tower packing. Adsorbents include molecular sieves, activated alumina, activated carbon, silica gel, clay desiccant, insulating glass desiccant and so on. Tower packing include plastic tower packing, metal tower packing and ceramic tower packing. In addition, we also produce honeycomb ceramic, foamed ceramic, ceramic balls and other products.
Yuanying is headquartered in Jiangxi and there are branch factories in Shandong, Ningxia, Jiangsu and Zhejiang. The area of headquarters plant is about 80, 000 square meters, with an annual output of more than 2, 000 tons of molecular sieve, about 30, 000 tons of chemical packing.
Our products: Activated Alumina, Molecular Sieves, Carbon Molecular Sieves, Clay Desiccant, Insulating Glass Desiccant, Honeycomb Ceramics, Foamed Ceramics, Activated Carbon, Ceramic Ball, Cascade Mini Ring, Intalox Saddle, Pall Ring, Raschig Ring, Super Intalox, Interlocks, Conjugate Ring, Mellaring, Super Mini Ring, Covering Ball, Hacketten, Heilex Ring, Nutter Ring, Sulzer Gauze Packing, Mellapale Packing, Dixon, HY-PAK, Sulzer Gauze Packing, Mellapale Packing, Piercing Hole Mellapale, Mesh Corrugated Packing, Teller Rosette Ring, Polyhedral Ball, Hollow Floating Ball, Pentagon Ring, Hiflow Ring, Snowilaker, Six Prismatic Ring, Plastic Structured Packing, Berl Saddle, Lessing Ring, Tri-Y Ring, Cross Ring, Spiral Ring, Wheel ring, Stacked Ring Packing, Ceramic Geometric Packing
