InconelX-750 alloy are mainly γ '[Ni3 (Al, Ti, Nb)] aging phase strengthened nickel-base superalloy, below 980 ºC with good resistance to corrosion and oxidation resistance below 800 ºC has higher strength below 540 ºC has good resistance to relaxation properties, but also has good formability and weldability. The plane of the alloy is mainly used in the manufacture of aircraft engines, work in the following 800 ºC and require higher strength corrosion-resistant annular member, structural parts and bolts and other parts, in the following 540 ºC working with medium or low resistance to stress and relaxation of requirements springs and coil springs. It can also be used in the manufacture of gas turbine blades and other turbine parts. We can supply varieties of sheet, strip, bar, forgings, ring member,wire and tubing.
| Chemical Composition |
|
|
|
|
|
|
|
|
|
|
|
|
|
| C | Cr | Ni+Co | Al | Ti | Fe | Nb+Ta | Co | Mn | Si | S | Cu | P |
| No Greater Than |
| ≤0.08 | 14.0~17.0 | ≥70.0 | 0.40~1.00 | 2.25~2.75 | 5.00~9.00 | 0.70~1.20 | 1.00 | 1.00 | 0.50 | 0.010 | 0.50 | 0.015 |
| Mechanical Properties |
| θ/ºC | σ/MPa | t/h | δ4D/% |
| 730ºC±3ºC | 362 | ≥23 | ≥5 |
·Mark: TM
·Material: Inconel X-750
·Finish: Polishing
·Certificate: ISO9001:2008, SGS
·Packaging Detail: 20-25kgs per carton, 36-48 cartons per pallet or according to customer's requirement.
·Customer Service: 24-hours standby, Critical listening your every suggestion and feedback ASAP.
TOMORROW manufacturing capabilities allow us to make a wide variety of exotic alloy fasteners. Our special materials are Hastelloy C-276, Hastelloy C-22, Hastelloy B3, Incoloy 825, Incoloy 925, Incoloy 926, Incoloy 800HT, Inconel 600, Inconel 625, Inconel X-750, Inconel 725, Inconel 718, Monel 400, Monel404, Monel K500, Duplex 2205, Super Duplex UNS32750, Super Austentic 904L, Super Austentic F44, Titanium, Nimonic 80A, GH113, GH3039, GH2032, Precipitation-hardening 17-4PH, Super Austentic 20Cb-3, Super Austentic 6XN, Austentic 347H etc. Our hot forged fastener size range is from M5-M100.
Our goal today, as always, is to develop innovative high quality exotic alloy fasteners that are durable, save time and money.
Customer service is just as important to us as quality.
Our representatives will assist you in analyzing your requirements and selecting the system best suited to your needs. We inventory an extensive line of standard products and will economically produce special systems to meet your design requirements. We are people who deliver what we say, when we say.
TOMORROW...Dependability in design, engineering, manufacturing and service.
Welcome to contact us anytime you feel suitable.
