EngineMake: SINOTRUK
Engine model: WD615.62, Euro II emission standard
4-stroke direct injection diesel engine, 6-cylinder in-line with water cooling, turbo-charging and intercooling
Maximum output: 266hp(196kW) at 2200 r/min
Maximum torque: 1100 /1100~1600
Displacement: 9.726L
Compression ratio: 17: 1
Specific fuel consumption: 195 g/kWh
ClutchΦ 430 mm diaphragm spring clutch, hydraulically operating with air assistance
TransmissionAllison 3500 4 forward& 1 reverse
Ratio: 4.593 2.257 1.535 1.0; R4.999
Front AxleModel: HW7
Rear AxlesModel: STR Ratio: 10.77
ChassisFrame: Parallel ladder frame with section 350× 80× 10 (mm), subframe with section 335× 85× 10 (mm)
Front suspension: Vertical semi-elliptic leaf springs, telescopic shock absorbers
Rear suspension: Rigid suspension
Fuel tank: 230L
SteeringModel: EATON, hydraulic steering with power assistance
Steering pump pressure: 12.5Mpa
BrakesBrake: WABCO brake, with air desiccator
Trailer brake: Dual pipe compressed air brake
Service brake: Dual circuit compressed air brake
Parking brake: (hand brake)spring energy, compressed air operating on rear wheels
Wheels & TyresRims: 8.5-20
Tire pressure (kPa): 700± 10
Tyres: 11.00-20
Engine |
Make: SINOTRUK |
Engine model: WD615.62, Euro II emission standard |
4-stroke direct injection diesel engine, 6-cylinder in-line with water cooling, turbo-charging and intercooling |
Maximum output: 266hp(196kW) at 2200 r/min |
Maximum torque:1100 /1100~1600 |
Displacement: 9.726L |
Compression ratio: 17:1 |
Specific fuel consumption: 195 g/kWh |
Clutch |
Φ430 mm diaphragm spring clutch, hydraulically operating with air assistance |
Transmission |
Allison 3500 4 forward& 1 reverse |
Ratio: 4.593 2.257 1.535 1.0;R4.999 |
Front Axle |
Model:HW7 |
Rear Axles |
Model:STR Ratio: 10.77 |
Chassis |
Frame: parallel ladder frame with section 350×80×10 (mm), subframe with section 335×85×10 (mm) |
Front suspension: vertical semi-elliptic leaf springs, telescopic shock absorbers |
Rear suspension:rigid suspension |
Fuel tank: 230L |
Steering |
Model: EATON, hydraulic steering with power assistance |
Steering pump pressure :12.5Mpa |
Brakes |
Brake:WABCO brake,with air desiccator |
Trailer brake:dual pipe compressed air brake |
Service brake: dual circuit compressed air brake |
Parking brake :(hand brake)spring energy, compressed air operating on rear wheels |
Wheels & Tyres |
Rims: 8.5-20 |
Tire pressure (kPa):700±10 |
Tyres: 11.00-20 |
Driver's Cab |
D10R, Enhanced Unilateral cab,air conditioner, forward turning 60 degree |
Electrics |
Operating voltage: 24V, negative grounded |
Starter: 24V, 7.5kW |
Alternator: 28V, 1500W |
Batteries: 12V, 165Ah |
Dimensions
in mm |
Wheel base |
3200 |
reference photo |
Front wheel track |
2046 |
|
Rear wheel track |
1850 |
Front/Rear overhang |
1350/630 |
Approach angle (0) |
23 |
Departure angle (0) |
75 |
Overall length |
5180 |
Overall width |
2495 |
Overall height |
3100 |
Weight
in kg |
Dead weight |
6900 |
Maximum loading capacity |
30000 |
Total quality Trailer |
70000 |
Front axle loading capacity |
13000 |
Rear axle loading capacity |
30000 |
Performance |
Maximum driving speed (km/h) |
39 |
Maximum gradeability (%) |
20 |
Minimum ground clearance (rear axle)(mm) |
298 |
Minimum turning radius (m) |
6 |
SINOTRUK QINGDAO HEAVY INDUSTRY Co., Ltd (original named as Special Truck Company, CNHTC) (here reference SINOTRUK Qingdao) is located in Qingdao, a beautiful seaside city. It is one of the wholly owned subsidiaries of SINOTRUK and the famous enterprise in special truck industry in China.
In 2011, our company expands the production scope, and increases the engineering machinery products, then the company rename "Special Truck Company, CNHTC" to "SINOTRUK Qingdao Heavy Industry Co., Ltd", and move to new factory located in Qingdao High-tech Industrial Development Zone. With over 2, 000 staffs working there, SINOTRUK Qingdao has the capacity of manufacturing 20, 000 special trucks and over 60, 000 sets of hydraulic components per year. The company owns a fixed capital of USD400 million and occupying 899, 100 square meters. The main products cover Excavator, Dump Truck, Concrete Mixer Truck, Garbage Truck, Aircraft Tractor, Military Vehicle, Semi-trailer, Water Tank Truck, Fuel Tank Truck, Fire Fighting Truck, Mobile Workshop, hydraulic component, etc.
SINOTRUK Qingdao is one of the 52 national vehicle export base enterprises and 53% of the products are exported to more than 50 countries and regions, such as Southeast Asia, Africa, South America, Middle Asia and Russia, etc. SINOTRUK Qingdao can provide best service for the overseas users in plenty of spare parts supply, after-sales services, abundant technical strength, regular customers visit and professional training.
It is your choice to choose us, to supply directly from manufacturer, quality trucks, best service, genuine spare parts.