Product Specifications
| Prod Model: |
KS-858E |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Frequency: |
433.92MHz |
| Power: |
AC220V±15% |
| Siren Built In: |
Inner Siren |
| Battery: |
DC 12V/7ah |
| Type: |
Home Alarm |
| Signal Transmission: |
Wireless Alarm |
| Working Mode: |
Passive |
| Certification: |
CCC |
| Application: |
Indoor |
| Sensor Type: |
Infrared Alarm System |
| Working Principle: |
Electromechanical |
| Transmission Mode: |
Wireless |
| Alarm Volume (',within 1m): |
≥90dB |
| Receive Frequency: |
433.92MHz |
| Usage: |
Smoke |
Product Description
Intelligent electronic security bluguard alarm system
Brief of the bluguard alarm system:
KS858 is a Telephone Networking Alarm Console with LCD display and 4*4 keyboard, and there are 16 zones (8 wireless zones and 8 wired zones). It works with KS-12A remote controllers (up to 8 remote controllers), various wireless/wired detectors, sensor switch, hand button, and foot switch and wireless/wired sirens. And they make up a completed safeguard system to guard against theft, fire, and so on. KS-858 main unit can be stored up to 5 groups of pre-set telephone numbers (fixed/mobile telephone number and pager number). Once alarm happens, the main unit will activate siren to make alarm sound immediately; and dial pre-set telephone numbers at the same time. It is widely used in residence, marketplace, finance system and enterprise.
Mean features:
2.1 It is easy to operate with 4*4 keyboard and lattice LCD display.
2.2 Voice pre-recorded. It guides to operate by sound and correctly reports alarm information when alarming.
2.3 There are 8-wired zones and 8 wireless zones altogether, and they share with the zone number.
2.4 8 sub zones can be programmed independently. And the zone list can be set freely in each sub zone, 8 remote controllers and 8 user's codes can separately program for 8 sub zones to ARM/DISARM independently.
2.5 Code classification, 1 installer code, 1 master code, and 8 common user 's codes. Add 1 at the end of master code/ common user's code, and then it will become duress code.
2.6 Support to ADEMCO CONTACT ID communication protocol
2.7 5 groups of telephone numbers (mobile and pager number) can be set. Dialing type (tone or pulse) and appointed communication zone can be programmed. Arm/disarm, whether to report the information of system state can be set freely.
2.8 DTMF (double-tone multi frequency) and pulse dialing mode are available.
2.9 It rushes to report alarm information when alarming (the line should be correctly connected)
2.10 Telephone line cut off or short-circuit will send an alarm. (Indicate sound or siren are optional)
2.11 Dial the telephone number, which connected with main unit to arm/disarm and start alarm on the spot function remotely through telephone or mobile phone.
2.12 Automatically learn code between Wireless PIR detector, remote controller and main unit (each zone can be learned up to 3 detectors, so it can be learned up to 24 detectors and 8 remote controllers altogether).
2.13 Wired zone respond speed is 50ms-750ms, and the circuit types (Normal Open, Normal Close and Line-end resistance) can be set freely to connect with all kinds of wired detector.
2.14 Two timers can be set to Arm/Disarm different zones independently.
2.15 Alarm delay time (00-99 seconds) and Arm delay time (00-99 seconds) can be set for appointed zones.
2.16 It has completed self-check function, Main unit/detector disassembly, AC power cut, backup battery lower of main unit and detector will activate alarming.
2.17 Linkage with wired/wireless Siren
2.18 Latest 30 pieces of alarm record (Alarm information, Month/Day/hour/minute) can be recorded, and the user and time of the last arm time and the last disarm time can be recorded. If the records are over 30 pieces, then it will delete the preceding ones automatically. User cannot change/delete the records.
2.19 Main unit and wireless PIR detector make communication in 26 hours to check if there are communication malfunctions. If there are malfunctions, the main unit will alert corresponding zone within 26 hours. (This function can be opened/closed)
2.20 Wireless detector reports to main unit for on/off. The report will be kept in record.
2.21 Both AC220V and 12V/7Ah rechargeable battery supply power, usually, it charges the backup battery automatically, and they switch automatically. The backup battery can work for 24 hours or more in standby time. And it reports when power lower. To avoid battery damaging, it adopts limited current discharge protection circuit.
Specifications:
Brand |
Karassn bluguard alarm system |
Model |
KS-858 alarm |
Power |
AC220V±15%, DC 12V/7Ah |
AUX Power |
<550mA |
Siren Output Current |
<1.5A |
Working Temperature |
0°C-55°C |
Relative Humidity |
40%-70% |
Wireless frequency |
433.92MHz alarm |
Shipment and payment:
Box Size |
38cm x 30.5cm x 12.4cm |
G.W. |
3.7 KG/BOX |
QTY. |
10 PCS/CTN |
Carton size |
64cm x 40cm x 65cm |
MOQ |
10 Sets alarm |
Sample |
Sample available for bluguard alarm system |
Shipping |
By Air or by sea, also Express SHL/FEDEX/UPS etc. |
Payment |
L/C, T/T, Western Union, Escrow |
Why choose us:
1.OEM and ODM available;
2.Certification: CE , CCC, ISO9001;
3.7 full new moving assemble lines;
4.Over 250 employees and 50 R&D engineers;
5.Supplier Assessed by Bureau Veritas France;
6.14 years experience specialize in designing, manufacturing alarm systems;
7.14 years experience in overseas market. Customers are from more than 50 countries.
Welcome to contact:
Karassn Security Protection Electronics Co., Ltd.
Add: Karassn Industrial Area, 1 Road, Economic & Technologic Zone,
Quanzhou City, Fujian Province, 362000 China
