Lvlp Linear DC Power Supply

LVLP Linear DC Power Supply

Introduction
LVLP series is linear DC power supply uses power frequency transformer AC/DC conversion technology and matured filtering circuit to ensure pure and & stable DC output As it uses power frequency transformer, it does not have high frequency radiation interference like switching mode power supply has, so it is suitable for some special conditions that sensitive to EMC. And by its matured and perfect filtering circuit, it has super low ripple and very good output precision; also it has complete protection functions As features above, this series is mostly used for capacitor, relay and resistor burn-in test and other kinds of test that needs high precision & low ripple DC output.

Features:1.      Over 500 models, output voltage: 0 ~ 800V, output current: 0 ~ 500A, output power: 0KW-400kW
2.      Constant voltage mode and constant current mode, automatic switchable, output voltage / current continuously adjustable from 0 to rated value.
3.      Over voltage protection: Over voltage value continuously adjustable from 0 to 110% rated value, auto-shut down when output voltage exceeds the over voltage set point
4.      Short protection: Withstand short-circuit under start-up or any working modes, sound & light alarm when output has short.
5.      Over load protection: Auto-tripping when power supply or load has fault and output current exceeds 1.5 times of rated value.
6.      Current-limit protection: User set current-limit value, output current will be limited at current-limit value when load has fault.
7.      Short alarm: sound & light alarm when output voltage lower than 1% of rated value and current higher 110% of rated value. (optional)
8.      Automatic off-load and discharging: when power supply shutdown, power supply will automatically cut off load and discharge electric in load for safety. (optional)
9.      Output display: Voltage & current both LED digital display (standard), LCD display (optional) or LCD touch screen display (optional)
10.   Pulsing working: could add time controller to be pulsing power supply (optional)
11.   Communication port: RS232/RS485 for connection with computer to be remote controlled & monitored by computers (optional)
12.   Analog signal: 0 ~ 5V (10V) or 4 ~ 20mA analog signal for output voltage & current control (optional)
 
Application
1.    Electrolysis capacitor burn-in, tantalum capacitor energizing, charging.
2.    Resistor, relay, motor, transistor and other electronic components burn-in and routine test.
3.    Stereo equipment test, vehicle electronics test
4.    Different kinds of current protector test.
5.    Lab, electronic device and automatic test equipment
6.    Electronic test device, production line equipment, communication equipment.
7.    Electrolysis, electroplating, electrochemical equipment.
8.    Other conditions need high precision DC output.
Technical Specification

Electrical Characteristics
1. Input,Output	Input: Single-phase 220Vac, 50 Hz±10% (≤7KW) Three-phase 380Vac, 50Hz±10% (>7kw) Output: DC C.C. and/or C.V. Max output: As requirements
2. Accuracy (C.V.)	Line regulation: ≤0.1% Of the rated value (output voltage change ratio under input ±10% change) Stability: during 8 hrs≤0.3% of the rated value (output voltage change ratio due to 8 hours continuously working) Temp. coeff.offset: ≤0.04% of the rated value/ºC(output voltage change ratio due to environment temperature changes) Load regulation(load 0~100%): ≤0.3% of the rated value (output voltage change ratio due to output current change from 0 to rated value)
3. Accuracy (C.C.)	Line regulation(361-418V): ≤0.1% Of the rated value (output current change ratio under input ±10% change) Stability: during 8 hrs≤0.3% of the rated value(output current change ratio due to 8 hours continuously working) Temp. coeff.offset: ≤0.04% of the rated value/ºC(output current change ratio due to environment temperature changes) Load regulation(load 0~100%): ≤0.3% of the rated value (output current change ratio due to output voltage change from 0 to rated value)
4. Ripple +noise(r.m.s)	CV: ≤0.01% of the rated value+10mV (80%~100% rated output) (single-phase input) / ≤0.1% of the rated value+10mV (80%~100% rated output) (three-phase input) CC: ≤0.2% of the rated value+10mV (80%~100% rated output)
5. Programming output voltage	Adjustable (0~rated value) or CV
6. Programming output current	Adjustable (0~rated value) or CC
7. Adjusting mode	10-turn Potentiometer Key button (optional)
8. Protections function	Output will be cut down when over voltage/over current/over temp./ lack phase (tri-phase)
9. Short protection	Withstand short-circuit and alarm
10. Working mode	Withstand long-term continuous working at full load
11. Read output	Digital LED
12. Display precision	As per output values
13. Display accuracy	≤±1%±1digit (range:5%~50% of the rated value) ≤±0.5%±1digit (range:50%~100% of the rated value)
14. Load characteristic	On demand
15. Operating condition	Location: indoor use only Temperature:-20°C ~ +40°C Humidity:≤90%
16. Spare parts	Company standard (fuse * 1pc operation manual * 1pc)

 
Input Voltage: Power source voltage can be changed to others on request. 
Custom-made specifications are on request.