New Type Single Stage Stone Jaw Crusher
DSMAC has endeavored to design and manufacture jaw crusher which is a type of highly-efficient and energy-saving crushing equipment. Jaw crusher has been widely used in mining, metallurgy, building materials, water conservancy, transportation, chemical industry etc. And it is usually applied for primary, secondary and tertiary crushing of various rocks, such as limestone, shale, basalt, pebble, bluestone, etc.
New Type Single Stage Stone Jaw Crusher Features
1. Crushing cavity is deep without dead zone. It is easier to feed materials and yield higher output.
2. Jaw crusher is featured with high crushing ratio and sound epigranularity.
3. The lubricating system is safe and reliable. It makes it easier to replace components and requires little maintenance.
4. It is highly energy saving. A single machine saves 15%~30% of energy consumed and the system can save over half the energy consumed.
5. To meet different client needs, the discharge gate is designed with a large adjusting range.
6. Jaw crusher causes low noise and creates little dust.
New Type Single Stage Stone Jaw Crusher is suitable for
1. Primary and secondary crushing
2. Compression strength is no more than 320Mpa
3. Any demanded crushing application
4. Hardest rock and recycle materials.
New Type Single Stage Stone Jaw Crusher Spare Parts:
Main spare parts of jaw crusher including jaw plate, toggle plate, fixing liner bushing, press slab, etc. OEM spare parts are available.
New Type Single Stage Stone Jaw Crusher Working Principle:
The motor transmits through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when mobile jaw moving. So the mobile jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.
Top Seller Jaw Crushing Machinery Project Case
800TPH Granite Crushing Line in Russia
This crushing line is for granite in Russia, the feeder, jaw crusher; cone crusher are be developed through joint efforts of Metso and DSMAC and integrated with the advanced technology from Metso.
NO. | Equipment | Model | Capacity(t/h) | Motor Power(KW) |
1 | Apron Feeder | BW1500*8000 | 300~460 | 15~45 |
2 | Jaw Crusher | PE1200*1500 | 400~800 | 200 |
3 | Cone Crusher | PYS-B1626*2 | 181~330 | 250 |
4 | Vibrating Screen | 4YK2460*2 | 150~875 | 37 |
New Type Single Stage Stone Jaw Crusher Technical Date:
Type | Maximum Feed (mm) | Adjusting Range(mm) | Production Capacity(t/h) | Spindle Speed (r/min) | Motor Power (kw) | Dimensions (Length*Wide*Height) (mm) | Weight (excluding motor) (t) |
PE250*400 | 210 | 20-80 | 10-20 | 310 | 15 | 1108*1142*1392 | 2.8 |
PE400*600 | 340 | 35-90 | 30-60 | 275 | 30 | 1700*1732*1653 | 6.5 |
PE500*750 | 425 | 50-100 | 40-90 | 275 | 55 | 1890*1882*1870 | 10.2 |
PE600*900 | 500 | 55-150 | 50-130 | 250 | 55/75 | 2254*1788*2297 | 12.6 |
PE750*1060 | 630 | 80-140 | 110-250 | 250 | 110 | 2730*2742*2840 | 28 |
PE900*1060 | 685 | 230-290 | 130-300 | 250 | 110 | 2970*2556*2800 | 31 |
PE900*1200 | 750 | 105-155 | 160-380 | 225 | 132 | 3528*2272*3470 | 39 |
PE1000*1200 | 850 | 205-300 | 310-550 | 200 | 132 | 3628*2272*3470 | 42 |
PE1200*1500 | 1020 | 150-300 | 400-800 | 180 | 200 | 4255*3262*3810 | 78.6 |
PE1500*1800 | 1200 | 220-350 | 500-980 | 180 | 355 | 5185*3660*4255 | 124 |
PE1600*2100 | 1250 | 175-300 | 800-1300 | 160 | 450 | 5220*4990*4850 | 170 |
PEX750*150 | 120 | 18-48 | 10-16 | 320 | 15 | 1220*1480*1180 | 3.5 |
PEX750*250 | 210 | 15-50 | 10-22 | 300 | 22 | 1270*1665*1497 | 4.9 |
PEX1000*250 | 210 | 15-50 | 17-50 | 330 | 37 | 1530*1992*1380 | 7.0 |
PEX1200*250 | 210 | 15-50 | 30-50 | 330 | 45 | 3045*1525*1430 | 7.7 |
PEX1300*300 | 250 | 20-90 | 35-80 | 300 | 75 | 1920*2235*1635 | 11.6 |
Terms of Trade
1.Payment: 30% advance payment by T/T, 70% balance should be paid off before loading, Western Union, L/C is available.
2. FOB and EXW all are available.
3. Production lead time: 15-45 days.
4. Shipping freight is quoted under your requests.
Why Choose Us?
We have a professional installation and after-sales staff,
We have the largest factories and production capacity,
We have a professional sales and service team,
The DSMAC machine, worthy of your trust!