Categories
Price: | US $ 950/Ton |
---|---|
Trade Terms: | FOB,CFR,CIF |
Min Order: | 1/Ton |
Pay Type: | L/C,T/T,Paypal,Western Union |
Prod Model: | SG-5 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Model No.: | Sg5 |
Kind: | PVC Resin |
Tensile Strength: | PVC |
Contraction Percentage: | <0.4% |
Water Absorption: | 0.2%~0.4%0. |
PVC Resin Process Method: | Ethylene Based and Calcium Ba |
Type: | Synthetic Resin and Plastics |
Purity: | Over 99.9% |
PVC Resin Polymer Process: | Suspension Grade |
K Value: | K55-77 |
Material: | Polyvinyl Chloride/PVC |
Usage: | Specialty Plastics |
Color: | White |
PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form.
They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
Specification:
Item No. | SG 5 |
K Value | 68-66 |
Viscosity ml/g | 118-107 |
Average Polymerization | 1100-1000 |
Number of impurity particles | ≤30 |
Volatile Content(incl.water)% | ≤0.40 |
Apparent Density g/ml | ≥0.45 |
Residual After Sieve 0.25mm mesh | ≤2.0 |
Number of Grain/400cm2 | ≤40 |
Plasticizer Absorption of 100g Resin | ≥20 |
Whiteness(160,after 10 min)% | ≥80 |
VCM Residue PPM | ≤3 |
Ethylidene Chloride mg/kg | ≤150 |
Packaging | 25 Kgs/Bag |
MOQ | 16TON(1*20FCL) |
Payment terms | 30% advance |
70% see the B/L copy pay the |
Tape: | SG1 | SG2 | SG3 | SG4 | SG5 | SG6 | SG7 | SG8 |
K value | 77-75 | 74-73 | 72-71 | 70-69 | 68-66 | 65-63 | 62-60 | 59-55 |
Viscosity, ml/g | 156-144 | 143-136 | 135-127 | 126-119 | 118-107 | 106-96 | 95-87 | 86-73 |
Average polymerization | 1350-1250 | 1250-1150 | 1100-1000 | 950-850 | 950-850 | 750-650 | ||
Number of impurity particle≤ | 30 | 30 | 30 | 30 | 30 | 30 | 40 | 40 |
Volatiles content %,≤ | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 | 0.40 |
Appearing density g/ml≥ | 0.42 | 0.42 | 0.42 | 0.42 | 0.42 | 0.45 | 0.45 | 0.45 |
Residual after sieve 0.25mm mesh≤ | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
0.063mm l≥ | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
Number of grain/400cm2≤ | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
Plasticizer absorbency value of 100g resin | 25 | 25 | 25 | 22 | 19 | 16 | 14 | 14 |
Whiteness %,≥ | 74 | 74 | 74 | 74 | 74 | 74 | 70 | 70 |
Residual chlore thylene content mg/kg≤ | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Ethylidene chloride mg/kg≤ | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
Application:
SG-1 is used in producing high-grade electrical insulating material
SG-2 is used in producing electrical insulating material, common soft products and film
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products,
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes
SG-5 is used in producing transparent products section bar, hard tube and decorative materials
SG-6 is used in producing clear foil, hard board and welding rod
SG-7, SG-8 is used in producing clear foil, hard injection molding.