GDS-5TX clock precision analyzer is suitable for the precision measuring of electronic products which use 32.768kHz, 4MHz, 4.194304MHz, 14.31818MHz, 16.384MHz, 1Hz second pulse. Among the working frequencies mentioned above, 1Hz and 1 minute pulse take pulse-contact measurement, and others use non-contact measurement. GDS-5TX clock precision analyzer epecially suits the testing of airline clock factory, automobile electronic bell, electronic timers, electronic temperature control, electronic energy meter, telephone, electronic scales, remote control, electronic calendar and quartz watch/clock. GDS-5TX clock precision analyzer has five ranges:
Ppm ( millionth difference),
S/d (daily error),
S/m (monthly deviation),
S/y (year error),
F (measured frequency error).
GDS-5TX clock presicion analyzer's large area of The sensor makes the receiver more sensitive. The fast processor and built-in TCXO make sure the accuracy of it is better than 0.3ppm. Tthe strength of the signal level is indicated by a 16-level signal indicator and you can easily know the signal strength through it. You can set upper and lower limits of range automatic alarm, and the setting paremeters you set can be saved. Attachment is a RS232 interface to connect a computer.
Features
1. Measuring objects: Quartz clock and clock circuit board
2. Voltage: 80-250V AC 50-60Hz
3. Testing frequency: 32.768kHz, 4MHz, 4.194304MHz, 14.31818MHz, 16.384MHz, 1Hz second pulse
4. Reference frequency: 16.384MHz TCXO
5. Testing accuracy: Better than 0.3ppm
6. Range: Ppm; S/d; S/m; S/y; F
7. Signal strength indicator: 16 level indicator
8. Second pulse: 1s, 2s, 5s, 10s, 20s and 1 minute
9. Volume: 25× 30× 10(cm)
10. Display mode: Four-digit LED display
11. Extra: Crystal oscillator slot to screen crystal oscillator according to PPM value and RS232 to connect GDS-5TX to a computer
Panel
GDS-5TX clock precision analyzer's panels are showed by Figure. 2 and Figure. 3:
1. Power indicator
2. Signal indicator
3. FAST working indicator
4. Display area
5. Alarming indicator
6. Pass
7. Ppm mode
8. S/d mode
9. S/y mode
10. S/y mode
11. F mode
12.12V output
13. Sensor interface
14. Connect to the optocoupler output of the electronic energy meter
15. Common ground
16. Second pulse input
17. Common ground
18. Frequency display area
19. Signal strength indicator
20. Signal strength digtal indicator and second cycle display area
21. Testing range switching
22. Machine number setting
23. Sencond pulse cycle setting
24. Data setting and alarming setting
25. Switching between setting and testing
26. Switching between 4.194304MHz and 1 minute pulse
27. Switching among 4MHz, 4.194304MHz, 14.31818MHz, 16.384MHz, 1Hz, 32.768kHz
Wisdom Source Ltd. Is committed to providing quartz watch/clock analyzer and clock tester for manufacturers quartz watch/clock and any other electronic products with 32.768kHz quartz in it. After years of development, our products already cover QWA-3B quartz watch/clock analyzer, QWA-5A quartz watch/clock tester, Q TESTER 6000 quartz watch/clock tester, GDS-5 portable quartz watch tester, GDS-5A clock tester, GDS-5B electric energy meter clock tester, GDS-5TX automobile clock tester. Testing ranges from quartz clock/watch, computer motherboards, electric energy meter to electric clock/timer, radio, thermostat and electronic scale. And testing frequency ranges from 32kHz to 100MHz.
