Product Specifications
Prod Model: |
SaoSA UV-S, SaoSA UV-H, SaoSA UV-B |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Molecular Principal Chain: |
Carbon Chain Polymer |
Synthetic Resin: |
Polyurethane Resin |
Natural Resin: |
Rosin |
Characteristic: |
Acrylic Resin |
Color: |
Clear |
Product Description
SaoSA Technology has been devoted to researching and manufacturing glass lamination resin for tens of years. As the largest manufacturer of glass lamination resin in China, we have a strong confidence in providing the resin with good quality and competitive cost to our customers all over the world. Before launching in civil market, SaoSA resin is the unique material adopted by China military party, applied to laminated glass of security constructions. With the experience of cooperating with military party, SaoSA inherits military standard to develop products, supervise production and control the quality.
SAOSA is the ONLY resin brand in Asia that has passed Europe Standard with certificates and test reports, such as EN356, EN12543-4,EN12600, EN 1063 and so on. SAOSA resin laminated glass has been proved 10 years no yellowing, no delamination and no bubbles. It is also called CIP laminated glass. CIP is a "cast in place" laminated safety glass made by pouring a special liquid resin into the cavity between sheets of glass. The resin is cured in the factory by UV rays to a hard plastic state, bonding the glass sheets together. The resin lamination process is recognized as one of the most advanced, user-friendly and energy efficient methods of producing laminated glass in the world.
Cast-in-Place Resin Laminated Glass perform satisfactorily for Annealed Bent Laminated Glass, Tempered Bent Laminated Glass, Heat-strengthened Bent Laminated glass, Patterned Laminated Glass, Wired Laminated Glass, Crackle Laminated Glass, etc.
SaoSA UV curing resin is on-component, ready-to-use liquid. You don't need to mix the resin with any other catalyst to start the curing. SaoSA resin liquid can only be cured by exposing to UV-A rays radiation (UV-A wavelength: 315nm-400nm). Therefore, the laminated glass with resin liquid inside exposing to sunlight directly, because sunlight covers UV-A rays, the other way is to use the assemble of UV light tubes to make resin cured indoor. Below is the processing method.
Preparation: Make two sheets of glass clean and dry. Apply double-sided adhesive tape to the perimeter of one glass sheet and assemble the two sheets, leaving a small opening for pouring resin. Then use clips to clamp the glasses, making two glass sheets connected more tightly.
Filling: Raise one edge of the glasses at about 30-40 degree and insert the funnel into the opening. Then pour the calculated amount of cast resin into the cavity between glasses through funnel. Then lay down the glasses and let the resin flow level, using the soft rubber hammer knock the glass where there will be bubbles in order to let bubbles run out.
Curing: Put the laminated glass in horizontal position under sunlight or UV tube lights for 30-50 minutes for complete curing.
No big machineries are required in lamination job, no electric bills in production. Low investment cost and low energy consumption are involved.
ANY INTEREST, please talk to me direclty. I am here awating you.
Tel: 0086.0592.5046038
As the resin lamination process is recognized as one of the most advanced, user-friendly and energy efficient methods of producing laminated glass in the world, SAOSA company, the earliest and largest Chinese glass lamination resin manufacturer, can offer you quality resin interlayer material for your laminated glass. With the hope we can be helpful for your business, I take this opportunity to introduce our company and products below:
Company: SAOSA Technology International Ltd
A largest manufacturer of glass lamination resin by offering one-stop solution for laminated glass production in China;
Has served over 80 countries and over 2000 glass fabrication factories all over the world for past 20 years;
No. 1 for annual quantity of resin production and sales in the world.;
Honored as one of three world brand, on a PAR with Solutia and Dopont in many exhibitions such as Dusseldorf, Frankfurt, Moscow and so on.
Products: SAOSA UV curing resin
One-component, ready-to-use liquid, cured by exposing to UV-A rays radiation of sunlight or a UV curing table for 30-50 minutes;
Only resin brand in Asia that passed Europe Standard with certificates and test reports;
Quality has been proved 10 year no discolor, no delamination, no bubble.
Models: Different application
SaoSA UV-S for general laminated glass, with high transparency rate
SaoSA UV-H for architectural laminated glass, with high impact resistance
SaoSA UV-B for bulletproof laminated glass
Any interest in SAOSA curing resin for fabricating laminated glass, I am awaiting here with respect:
Tel: +86.0592.5046038